查找使用阿拉丁产品的科研文献

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Andong Hua,Yishi Su,Yunpeng Cai,Xiaozhen Wang,Kan Liu,He Cao,Di Zhang,Qiubao Ouyang

Due to the high modulus, high strength , low density, excellent wear resistance and good neutron absorption, the boron carbide (B 4 C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B 4 C/Al composites, introducing a nano-scale reinforcement into the B 4 C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B 4 C microparticles . Thus, the 15vol. % B 4 C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B 4 C microparticles and SiC nanowires are uniformly dispersed in the B 4 C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes . B 4 C/SiC/Al composites produce the better strength-ductility matching than that of B 4 C/Al composites, while the 15vol. % B 4 C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B 4 C/Al composites. Uniformly dispersed B 4 C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B 4 C/SiC/Al composites. Moreover, the B 4 C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B 4 C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites .