INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2022
·Vol. 23
·期 12
·6710
·
IF 6.208
Binghui Duan,Xianming Lu,Hongchang Mo,Bojun Tan,Bozhou Wang,Ning Liu
Safety concerns remain a bottleneck for the application of 2,4,6,8,10,12-hexanitro- 2,4,6,8,10,12-hexaazaisowurtzitane (CL-20)/1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX) cocrystal. Melamine–formaldehyde (MF) resin was chosen to fabricate CL-20/HMX cocrystal-based core–shell composites (CH@MF composites) via a facile in situ polymerization method. The resulted CH@MF composites were comprehensively characterized, and a compact core–shell structure was confirmed. The effects of the shell content on the properties of the composites were explored as well. As a result, we found that, except for CH@MF–2 with a 1% shell content, the increase in shell content led to a rougher surface morphology and more close-packed structure. The thermal decomposition peak temperature improved by 5.3 °C for the cocrystal enabled in 1.0 wt% MF resin. Regarding the sensitivity, the CH@MF composites exhibited a significantly reduced impact and friction sensitivity with negligible energy loss compared with the raw cocrystal and physical mixtures due to the cushioning and insulation effects of the MF coating. The formation mechanism of the core–shell micro-composites was further clarified. Overall, this work provides a green, facile and industrially potential strategy for the desensitization of energetic cocrystals. The CH@MF composites with high thermal stability and low sensitivity are promising to be applied in propellants and polymer-bonded explosive (PBX) formulations.Keywords:CL-20/HMX cocrystal;in situ polymerization;core–shell structure;desensitization;thermal stability
研究领域:
材料科学
·
爆炸物化学
·
高能材料工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PROPELLANTS EXPLOSIVES PYROTECHNICS
·
2023
·Vol. 48
·期 7
·e202200317
·
IF 1.8
Jian Guan,Huan Peng,Yulan Song,Bo Jin,Rufang Peng
The thermal decomposition of Hexanitrohexaazaisowurtzitane CL-20/HMX-ammonium formate functionalized graphene oxide (Am-GO) composites was studied using an isothermal decomposition dynamics research instrument to explore the effects of Am-GO on the stability of CL-20/HMX co-crystal. The gas pressure-time curve generated by thermal decomposition reaches the decomposition inflection point at a decomposition degree of 85 %. Compared with CL-20/HMX co-crystal, the decomposition extent corresponding to the inflection point of the thermal decomposition curve of the composites increases. The activation energies of the composites before and after the inflection point of the pressure-time curve were 161.3 kJ/mol and 171.0 kJ/mol, respectively. The residual substances produced by the thermal decomposition of the composites were characterized by HPLC and FTIR. Results showed that CL-20 and HMX were decomposed before the inflection point of the decomposition pressure-time curve. However, the decomposition of CL-20 was completed before the inflection point, whereas that of HMX ran through the thermal decomposition process. The calculation results of thermal decomposition kinetics show that the addition of coating material increases the activation energy of co-crystal and stabilizes CL-20/HMX co-crystal.
研究领域:
材料科学
·
化学动力学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 5
·1858-1864
·
IF 3.288
Zongkai Wu,Jiangfeng Pei,Xiuduo Song,Ning Liu,Jianguo Li,Ming Zhang,Jun Zhang,Dongxiang Zhang,Fengqi Zhao
The DSC-TG-MS-FTIR coupling technique and in situ FTIR technique were used to study the catalytic effects of nano-Fe2O3 and rGO–Fe2O3 on the thermal decomposition behaviors of CL-20/HMX cocrystals. The results showed nano-Fe2O3 having a good catalytic effect on the thermal decomposition of the CL-20/HMX cocrystal. Nano-Fe2O3 was found to enhance CO2 production and prevent the production of NH2+, HCN, and CHO or N2H+ during the decomposition of cocrystalline CL-20/HMX. Meanwhile, both the CL-20/HMX thermal decomposition peak temperature and Ea were reduced by including nano-Fe2O3. The inclusion of rGO–Fe2O3 did not enhance the catalytic effect of nano-Fe2O3, but did reduce residue formation during the CL-20/HMX decomposition process. Breaking of N–N bonds and the release of NO2 were concluded to constitute the initial steps of the decomposition of the CL-20/HMX cocrystal. This investigation has contributed to our understanding of the thermal decomposition of the CL-20/HMX cocrystal and provides guidance for the catalytic decomposition of energetic material cocrystals.
研究领域:
材料科学
·
化学动力学
·
能量材料
✓ 已验证
DOI
高影响因子
ACS Omega
·
2025
·
IF 4.3
SongYuChen Ma,Tao Liu,DeQi Wang,YinHui Li,WenJing Shi,FengSheng Li,Jie Liu
To address the quality issues arising from the uncontrollable morphological grain size in the preparation of CL-20/HMX cocrystals, a novel method for producing high-quality cocrystals with well-defined morphological grain sizes has been developed. The cocrystallization process was conducted using the solvent/nonsolvent method, wherein the mixing efficiency and solution supersaturation were precisely controlled through systematic optimization of key parameters, including solvent composition, solvent/nonsolvent ratio, reaction temperature, and stirring rate. Through systematic optimization of experimental parameters, three distinct rhombohedral CL-20/HMX cocrystal samples with uniform particle size distributions and well-defined morphologies were successfully prepared, exhibiting characteristic D50 values of 20, 63, and 130 μm. Comprehensive characterization revealed that SEM analysis demonstrated the cocrystals possess smooth surfaces and regular geometric shapes. Combined XRD and micro-CT analyses confirmed the high crystallinity of the cocrystals, particularly noting the reduced internal defects and superior crystal perfection in larger-grained samples. DSC measurements indicated enhanced thermal stability in cocrystals with larger particle sizes. Furthermore, sensitivity testing showed larger-grained cocrystals are less sensitive than smaller-grained ones, which can be attributed to the more compact internal structure of the crystals.
研究领域:
材料科学
·
爆炸物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PROPELLANTS EXPLOSIVES PYROTECHNICS
·
2022
·Vol. 48
·期 2
·e202200192
·
IF 2.134
Qi Huang,Yulan Song,Zhicheng Guo,Jinhao Zhang,Bo Jin,Ya Guo,Rufang Peng
Interface interaction has always been considered a major challenge in the field of desensitization. Co-crystal explosives can balance the properties of energetic materials, but their limited desensitization effect limits their further practical applications. Based on this, we proposed the desensitization of CL-20/HMX co-crystal by three functionalized graphene oxide (NH 2 -GO, Am-GO and M550-GO). The sensitivity results indicate that the M550-GO has the best desensitization. To further explore the reasons for the better desensitization effect of M550, molecular dynamics was used to simulate the binding energy and mechanical properties of different systems. The results showed that the electrostatic interaction between functionalized graphene oxide and CL-20/HMX co-crystal can enhance the interfacial interaction more than van der Waals force. In a word, this work provides new ideas and insights for enhancing the interface interaction of coating materials and popularizing the practical application of co-crystal explosives.
研究领域:
材料科学
·
爆炸物化学
·
界面工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）