JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2024
·
IF 4.3
Hongsen Chen,Dan Jin,Tingyou Yu,Yuguo Du,Xiaolong Yang
Ti 3 C 2 T x MXene material exhibits exceptional dielectric properties and a distinct layered structure, making it a noteworthy microwave absorbing material. However, its microwave absorption performance is limited due to poor impedance matching and a single loss mechanism. To address these issues, this work develops a solvothermal method to introduce the magnetic component CoNi alloy and generate organic polymer PANI through in-situ polymerization, resulting in the preparation of Ti 3 C 2 T x /PANI/CoNi ternary composites that significantly improve impedance matching and microwave absorption performance. The microwave absorption properties of the binary and ternary composites are compared, and the superior performance of the ternary composites is emphasized. Among the ternary composites, M-P-CN 3:1:8 exhibited an excellent microwave absorption performance, demonstrating a minimum RL value of −55.48 dB and an effective absorption bandwidth of 5.1 GHz at a thickness of 2.0 mm. The synergistic effect of multiple loss mechanisms, multilayer structures, and multiple interfacial polarization methods further contribute to the enhanced microwave absorption performance of ternary composites. This study provides a straightforward method for synthesizing and designing multi-component composite absorbing materials based on MXene.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
ACS Biomaterials Science & Engineering
·
2023
·
IF 5.8
Ying Zhou,Min Tian,Ruichun Li,Yan Zhang,Guomei Zhang,Caihong Zhang,Shaomin Shuang
An electrochemical sensor applied for dopamine (DA) detection was constructed. An easy static way was used to synthesize bimetallic CoNi-MOF. Next, it was mixed with graphene oxide (GO) under ultrasound to get a uniform suspension. Subsequently, the solution was coated on the glassy carbon electrode (GCE) to form CoNi-MOF@ERGO/GCE by the electrochemical reduction method. The interaction between CoNi-MOF and electrochemically reduced graphene oxide (ERGO) enhances the electrocatalytic performance for DA detection. CoNi-MOF@ERGO/GCE has a wider linear range (0.1–400 μM) and a lower detection limit (0.086 μM) under optimum conditions. Furthermore, it has been applied to test DA in human serum samples. The results reveal that the DA sensor shows excellent performance, which will provide a novel idea for more sensitive and quicker DA detection.
研究领域:
生物化学
·
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yue Shi,Jiejie Bai,Aixin Ma,Zhitao Zou,Yanru Liu,Haifeng Lin,Dehong Chen,Ruiyong Zhang,Jianping Lai,Lei Wang
The superior electrocatalysts for seawater oxygen evolution reaction (OER) require fast kinetic to promote reactant (OH − ) transport and adsorption, and to optimize oxygenated intermediates (O* and OOH*) adsorption, but also high corrosion resistance by impeding Cl − adsorption under harsh seawater conditions, while the incomprehensive design greatly hinder the system advancement at high current densities. Herein, we propose orderly incorporating amorphous FeSe nanosheets as the dynamic anti-corrosion layer to reinforce charge redistribution of CoNi layered double hydroxide (LDH) nanosheets array and create favorable microenvironments. The ordered two-dimensional/three-dimensional structure prepared by novel non-equilibrium electrodeposition strategy allows amorphous FeSe component not only to activate CoNi-LDH for promoting OH − adsorption, optimizing oxygenated intermediates adsorption and increasing Cl − adsorption energy, but also repel Cl − by dynamic polyanion layer without blocking active sites, thus affording effective seawater OER with low overpotential, excellent stability and high selectivity at high current densities. The integrated CoNi-LDH/FeSe electrode delivers a small overpotential (338 mV at 500 mA cm −2 ) and possesses outstanding stability and selectivity during a 500-hour durability test at 500 mA cm −2 in alkaline seawater.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2025
·
IF 2.6
Du Jia,Chen Lixuan,Wu Yiming,Wei Xin,Jia Jingyuan,Sun Kenan,Li Bingke
Nowadays, the advancement of eco-friendly, clean, sustainable and renewable new energy has emerged as a research priority for scientists worldwide. Electrolytic water technology is founded on the principle of electrochemical or photoelectric decomposition of water, is deemed as one of the most promising and most feasible approaches to reach industrial production. Traditional OER (oxygen evolution reaction) electrocatalysts like IrO 2 and RuO 2 are beset by high costs and vulnerability to poisoning. Hence, it is essential to develop more economical, more stable and more efficient materials for the application of OER reactions. In this study, a series of AQ-doped (AQ = anthraquinone) MOF-74 materials were fabricated through a one-step solvothermal approach. The surface loading of the conjugated organic small molecule AQ on CoNi-MOF-74 is capable of effectively boosting the inadequate electrical conductivity of the bulk MOF material, thus significantly enhancing the performance of OER. The optimized ratio of material composition of AQ20@MOF-74 displayed significantly enhanced OER activity. with a lower overpotential of 272 mV at 10 mA cm −2 and a smaller Tafel slope of 78 mV dec −1 . The research findings presented in this thesis provide a novel approach for the design and optimization of highly efficient OER electrocatalysts based on MOFs.
研究领域:
材料科学
·
能源化学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2023
·Vol. 13
·期 7
·1064
·
IF 3.9
Yutong Ye,Guorong Zhou,Kaixun Li,Yun Tong
Anion modification and trace metal doping have been widely demonstrated to have unique advantages in regulating both electrocatalytic activity and the electronic structure of non-precious metal materials. Developing a simple and practical preparation strategy is critical, but it still faces challenges. In this paper, a novel type of dual-modification approach is put forward to rationally design the S, Pt-CoNi material, which can be grown directly on the nickel foam (NF) in a one-step electrodeposition process. The multiple advantages of having plenty of active sites, high conductivity, and a faster charge transfer endow the optimized reaction kinetic for HER. The prepared S, Pt-CoNi/NF catalyst displays excellent catalytic performance, and a low overpotential of 116 mV at 50 mA cm−2and a small Tafel slope of 75 mV dec−1are achieved. The coupled S, Pt-CoNi/NF||FeOOH/NF electrolyzer delivers a high current density of 100 mA cm−2at the potential of 1.61 V as well as superior stability under alkaline conditions. Our work experimentally confirms the feasibility of constructing a dual-regulation strategy via one-step electrodeposition, and it also provides ideas for the controllable design of other high-performance electrodes for electrocatalysis.Keywords:dual-modification;CoNi alloy;electrodeposition;electrocatalytic hydrogen production;alkaline medium
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Nano Futures
·
2022
·Vol. 6
·期 4
·045001
·
IF 4.07
Yichuan Guo,Zizhen Gong,Hang Yu,Guihua Liu,Zisheng Zhang,Changcheng Wu,Jingde Li
Efficient electrocatalysts are critical for the oxygen evolution reaction (OER) that occurs during water electrolysis. Herein, a simple and low-cost strategy of assembling CoNi nanowire arrays with NiFe nanosheets on flexible carbon cloth (CC) support as an efficient OER catalyst is developed. This unique 'nanosheets on nanowires' structure design increases its specific surface area, enabling access to more active sites. The resulting NiFe@H-CoNi/CC catalyst exhibits excellent OER activity (280 mV overpotential at 100 mA cm−2) with a Tafel slope of 36 mV dec−1 and also has outstanding durability at high current operation conditions (over 100 h at 100 mA cm−2). Moreover, in-situ Raman analysis suggests that the NiOOH is the realistic OER active phase. This 'nanosheet on nanowire' design gives a means for fabricating OER catalysts that are both high-performance and long-lasting.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Chemistry-An Asian Journal
·
2025
·
IF 3.3
Pengkun Wei,Wenhui Zhang,Liuting Wang,Huayu Yao,Ruijuan Duan,Jianbiao Peng
Coupling of anodic oxygen evolution reaction (OER) and cathodic molecular oxygen activation (MOA) addresses the issues of conventional electrochemical advanced oxidation process (EAOP), such as parasitic anodic oxygen evolution and potential formation of halogenated byproducts in the presence of halogens, while the key to this process is an anodic O 2 supply generated from the hysteretic OER. Herein, we have constructed crystalline-amorphous cobalt–nickel-layered double hydroxide (CoNi-LDH) nanosheets by simple one-step ultrasound treatment as OER catalysts. Benefiting from the partially amorphous and porous structure, the CoNi-LDH heterojunction shows an overpotential of 260 mV to achieve a current density of 10 mA cm −2 . Besides, it also exhibits excellent electrochemical stability in basic media, which is significantly superior to the corresponding layered monometallic hydroxides. This work provides inspiration for optimizing the catalytic activity of OER electrocatalysts through combining crystalline and amorphous heterojunction, expecting the potential application in OER/MOA process.
研究领域:
电化学
·
材料科学
·
催化
·
纳米技术
·
环境工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
WATER AIR AND SOIL POLLUTION
·
2024
·Vol. 235
·期 8
·1-14
·
IF 3.8
Wang Weixing,Wang Lei,Lv Yincun,Deng Chenchen,Hu Zehui
Abstract As a broad-spectrum antibiotic, chloramphenicol has an important contribution in resisting bacterial diseases. It has been widely used in medicine and animal husbandry, but it has the disadvantages of long-term unreasonable use and slow degradation in nature. Long-term consumption of food contaminated by chloramphenicol will cause serious side effects to human beings. Therefore, it is urgent to establish an effective method to remove chloramphenicol from wastewater. Co/Ni@ZrO 2 photocatalyst with nanosphere structure was prepared by hydrothermal method and used for the degradation of chloramphenicol (CAP).The structure, morphology and optical properties of the samples were characterized by TEM, SEM, XPS, XRD, FT-IR and UV-Vis. Under visible light, 12% Co/Ni@ZrO 2 has good photocatalytic performance for the degradation of chloramphenicol, which may be due to the synergistic effect and nano-limitation effect between Co/Ni and ZrO 2 . When the optimal dosage of catalyst is 50 mg / L and the initial concentration of chloramphenicol is 20 mg / L, the degradation rate is 98.2 % within 150 min. XPS and Raman results showed that there were appropriate amount of oxygen vacancies on the surface of ZrO 2 , which accelerated the electron transfer rate in the system and inhibited the recombination of photoelectron-hole pairs under visible light, thus improving the activation efficiency of dissolved oxygen in chloramphenicol solution. Free radical capture experiments showed that· O 2 - ,· OH, h + were the main active substances for the degradation of chloramphenicol. The possible mechanism of chloramphenicol degradation under visible light was speculated. The results show that Co/Ni@ZrO 2 is a promising photocatalyst for wastewater treatment. Graphical Abstract A schematic diagram of charge separation and transfer during the degradation of chloramphenicol by 12wt % CoNi @ ZrO2 nanospheres
研究领域:
环境科学
·
材料科学
·
药学
✓ 已验证
DOI
高影响因子
Coatings
·
2024
·Vol. 14
·期 5
·631
·
IF 2.9
Leiyu Du,Renxin Xu,Yunfa Si,Wei Zhao,Hongyi Luo,Wei Jin,Dan Liu
Developing microwave absorbers with superior low-frequency electromagnetic wave absorption properties is one of the foremost important factors driving the boom in 5G technology development. In this study, via a simple hydrothermal and pyrolysis strategy, randomly interleaved CoNiO2nanosheets and uniformly ultrafine CoNi nanocrystals are anchored onto both sides of a single-layered MXene. The absorption mechanism demonstrated that the hierarchical heterostructure prevents the aggregation of MXene nanoflakes and magnetic crystallites. In addition, the introduction of the double-magnetic phase of CoNiO2/CoNi arrays can not only enhance the magnetic loss capacity but also generate larger void spaces and abundant heterogeneous interfaces, collectively promoting impedance-matching and furthering microwave attenuation capabilities at a low frequency. Hence, the reflection loss of the optimal absorber (M–MCNO) is −45.33 dB at 3.24 GHz, which corresponds to a matching thickness of 5.0 mm. Moreover, its EAB can entirely cover the S-band and C-band by tailoring the matching thickness from 2 to 7 mm. Satellite radar cross-section (RCS) simulations demonstrated that the M–MCNO can reduce the RCS value to below −10 dB m2over a multi-angle range. Thus, the proposed hybrid absorber is of great significance for the development of magnetized MXene composites with superior low-frequency microwave absorption properties.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2025
·
IF 3.7
Xiao Wei,Xuan Fang,Shuming Ma,Huaqiang He,Zhixin Wu,Silin Li,Shihao Zhang,Pei Nian,Wenlan Ji,Yibin Wei
Addressing the contamination of antibiotics has attracted ever-increasing and imperative attention due to their widespread existence, easy-to-cause drug-resistant bacteria infection, coupled with their intrinsic toxicity and hazard to environments and human health. Herein, a novel CC/CoNi-LDH-10%Ce anode material was directly constructed through a simple and rapid electrodeposition strategy, serving as an efficacious electrocatalyst for removing ciprofloxacin (CIP) from aqueous solution. Such novel CC/CoNi-LDH-10%Ce anode delivered a higher charge transfer, relatively abundant oxygen vacancies, and a higher electrochemical active area. The as-fabricated CC/CoNi-LDH-10%Ce electrode achieved a substantially boosted CIP removal efficiency of 52.5% relative to that of pure CC at about 23.9%. Notably, doping an appropriate amount of Ce 3+ can endow the pristine CC/CoNi-LDH with richer oxygen vacancies and excellent electrocatalytic performance. Additionally, the electrocatalytic oxidation of CIP was attributed to both direct oxidation on the electrode surface and indirect oxidation induced by the generated active species (superoxide radicals and hydroxyl radicals). This study provides a simple, universal and flexible tactic for other researchers in designing and manufacturing avenues of electrodes.
研究领域:
环境科学
·
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Fengshun Wu,Li Zeng,Lihua Zhu,Weizhen Wang,Chenghao Cao,Zhiqing Yang,Congxiao Shang,Hengqiang Ye,Zhengxiao Guo
Methanol and ethanol are liquid carriers of hydrogen, convenient and safe to store and transport, particularly of interest as mobile and marine fuels. These can be directly fed into a fuel cell to impart clean energy efficiently, only if their conversion can be cost-effectively catalyzed. In this regard, a cooperative catalyst is developed with atomic Pd species, in the form of single atoms and nanoclusters, dispersed over non-noble bi-metallic CoNi alloy nanoparticles, further supported on reduced graphene oxide (rG) (Pd@CoNi/rG). The catalyst demonstrates a methanol (ethanol) oxidation, MOR (EOR), mass activity (MA) of 1.730 (3.917) A mg −1 Pd (or Pt) , 4.55 (60.26) times greater than that of the commercial 20 wt% Pt/C and 8.65 (20.61) times higher than that of the commercial 20 wt% Pd/C, respectively. More importantly, the catalyst shows excellent stability, maintaining 83.7% (93.7%) of the initial performance after chronoamperometry (CA) for 50000 s in a solution of 1 M KOH + 1 M CH 3 OH (CH 3 CH 2 OH). It significantly out-performs other mono-/bi- metallic counterparts, e.g., Co/rG, Ni/rG, Pd/rG, CoNi/rG, Pd@Co/rG and Pd@Ni/rG, due to its unique cooperative nanostructure with synergistic effects of the different metal (Pd, Co and Ni)-related species.
研究领域:
材料科学
·
电化学
·
能源科学
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Amir Said,Binbin Qian,Ruiqian Zhang,Chunlei Yang,Ke Xu,Kunfeng Chen,Dongfeng Xue
The development of electrocatalysts with bifunctionality in acidic media is crucial for advancing proton exchange membrane water electrolyzers to produce clean hydrogen fuel. Herein, an efficient bifunctional RuO 2 /MoO x /CoNi-LDH nanocomposite was synthesized for the first time via a coprecipitation and two-step hydrothermal method and used as an electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), thereby contributing to efficient overall water splitting (OWS). When used as an electrocatalyst in 0.5 M H 2 SO 4 , the RuO 2 /MoO x /CoNi-LDH requires an overpotential of 185, 221, and 262 mV for OER and 33, 65, and 101 mV for HER to reach the current density of 20, 50, and 100 mA/cm 2 , respectively. The improved electrochemical performances of RuO 2 /MoO x /CoNi-LDH are well supported by a low charge transfer resistance, high electrochemical surface area, optimized nanocomposite structure, and the synergistic interaction among the RuO 2 NPs, MoO x nanosheet (NSs), and CoNi-LDH. Importantly, in acidic OWS, bifunctional RuO 2 /MoO x /CoNi-LDH exhibits excellent activities and merely requires a low voltage of 1.53 V to reach the current density of 20 mA/cm 2 , lower than most of the mixed-metal-based bifunctional electrocatalysts reported in acidic media. This study provides an efficient and cost-effective method for preparing high-performance mixed-metal nanocomposites for electrochemical water splitting in acidic environments and beyond.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）