CATALYSIS TODAY
·
2016
·
IF 4.312
Xuesong Liu,Xiaodong Wu,Duan Weng,Zhichun Si,Rui Ran
Cu-modified SAPO-34 molecular sieves with different Cu loading amounts were prepared by ion-exchange and impregnation methods. Both series of catalysts were hydrothermally treated at 750 °C in 10 vol% H 2 O/air for 24 h. The catalysts were characterized by inductively coupled plasma optical emission spectrometry (ICP-OES), electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS), H 2 temperature-programmed reduction (H 2 -TPR), NH 3 temperature-programmed desorption (NH 3 -TPD) and diffused reflectance infrared flourier transform spectroscopy (DRIFTS). All the fresh catalysts show high activity toward the selective catalytic reduction of NO x with NH 3 (NH 3 -SCR) at low temperatures regardless of preparation method. Generally, the hydrothermal aging shifts the operation window of the catalysts towards high temperatures. The improvement in high-temperatures activity is attributed to the migration of surface CuO clusters into the ion-exchanged sites as isolated Cu 2+ during ageing, which suppresses the competitive oxidation of NH 3 . The loss of low-temperatures activity is also related to the decrease in the amount of active surface CuO clusters, inhibiting the oxidation of NO to NO 2 and fast SCR reaction. Interestingly, the amount of Lewis acid sites increase linearly with the increasing isolated Cu 2+ , while the Brønsted acidity is weakened.
研究领域:
催化化学
·
环境科学
✓ 已验证
DOI
高影响因子
International Journal of Applied Ceramic Technology
·
2018
·Vol. 15
·期 6
·1490-1501
·
IF 1.165
Xiangli Kong,Minghui Qiu,Anran Wang,Lu Yang,Rongfei Zhou,Yiqun Fan,Deshuang Kong,Changjun Gu
The adhesion and cohesion between the coating layers and the ceramic honeycombs are usually one of the key issues in the preparation of high-performance zeolite-based/Monolith catalysts. In this work, we investigate the deposition of high-efficiency Cu-SAPO-34 catalyst on a cordierite monolith with special focus on the impact of alumina binders on the structure, mechanical adhesion and cohesion, and catalytic performance of the monolithic catalyst. Two kinds of alumina nanoparticles, α-alumina and γ-alumina, have no significant impacts on the Cu-SAPO-34 crystal structure, micropore morphology and catalytic activity. But washcoating experiments showed that the mass loss rate of the coating was less and the loading of the catalyst was higher when α-alumina was used as the binder. The reason of improving the adhesion and cohesion strength is the suitable thermal shrinkage, the uniform distribution and densification structure of α-alumina. Furthermore, optimization of the coating formulation with α-alumina as the binder has been performed. Finally, the catalyst prepared under the optimal conditions was tested by SCR and a maximum conversion rate of 97.4% was obtained. It was concluded that the use of the washcoating method with α-alumina does not affect catalytic performance while it increases bonding strength between substrate and catalysts.
研究领域:
化学工程
·
催化材料科学
✓ 已验证
DOI
高影响因子
Reaction Kinetics Mechanisms and Catalysis
·
2019
·Vol. 128
·期 2
·1065-1077
·
IF 1.428
Yu Qifan,Liu Xuesong,Chen Hongfeng,Liu Shuang,Jiang Peng
The regeneration mechanism of sulfated Cu/SAPO-34 catalysts in reducing atmospheres (5% H 2 /Ar and NH 3 /Ar at 600 °C) was investigated by using a series of characterization methods. Hydrogen regeneration improved the catalysts’ NH 3 -SCR activity from 150 to 550 °C remarkably, while ammonia regeneration exhibited relatively less obvious promotion effect. The TPR of hydrogen and EPR spectra data show that the regeneration process affects the amount and the coordination of the active isolated Cu 2+ species significantly. The desulfation increases the amount of isolated copper ions and improves the catalytic activity of SCR.
研究领域:
环境科学
·
催化化学
✓ 已验证
DOI
高影响因子
Journal of Environmental Sciences
·
2016
·
IF 2.208
Jixing Liu,Fuhong Yu,Jian Liu,Lifeng Cui,Zhen Zhao,Yuechang Wei,Qianyao Sun
A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH 3 -SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), N 2 sorption-desorption, nuclear magnetic resonance (NMR), Inductively Coupled Plasma-Atomic Emission spectrometer (ICP-AES), X-ray absorption spectroscopy (XPS), Temperature-programmed desorption of ammonia (NH 3 -TPD), Ultraviolet visible diffuse reflectance spectroscopy (UV-Vis DRS) and Temperature programmed reduction (TPR). The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion (> 90%) among the wide activity temperature window in the range of 150–425°C.
研究领域:
催化化学
·
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
CATALYSIS TODAY
·
2018
·
IF 4.667
Xianghui Li,Yingnan Zhao,Huawang Zhao,Mengke Liu,Yuhan Ma,Xin Yong,Hong Chen,Yongdan Li
Two kinds of Cu-SAPO-34 catalysts, prepared with a one-pot technique using Cu- tetraethylenepentamine as co-template and an ion-exchange method, were hydrothermally treated at 750 °C for at least 16 h. The migration of Cu species during hydrothermal treatment and the corresponding effect on the selective catalytic reduction (SCR) of NO x were examined and characterized. A certain amount of CuO exists outside and inner the crystallites in the as prepared ion-exchanged sample, whereas copper is mainly atomically dispersed in the one-pot sample existing as isolated Cu 2+ . After hydrothermal treatment for 16 h, the amount of the inner nanosized CuO in the ion-exchanged sample reduced and the copper disperses to form more isolated Cu 2+ . However, surface CuO particles increase at the sacrifice of isolated Cu 2+ with extending the hydrothermal treatment to 24 h. Aggregation of Cu 2+ species also happens during the aging treatment over the one-pot prepared sample where the initial Cu is atomically dispersed as isolated Cu 2+ . The increase of the amount of the isolated Cu 2+ enhances the low-temperature (< 350 °C) performance. However, the increase of the amount of surface CuO particles in the aged samples promotes the nonselective NH 3 oxidation reaction in the high temperature range and results in the lowering of the SCR activity by limiting NH 3 supply.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Guangpeng Yang,Xuesen Du,Jingyu Ran,Xiangmin Wang,Yanrong Chen,Li Zhang,Vladislav Rac,Vesna Rakic,John Crittenden
SCR activity of Cu-SAPO-34 catalyst was reduced by alkali metal ions. The alkali metals ions (Li + , Na + and K + ) have shown irregular influences on Cu-SAPO-34. The order of poisoning strengths under 400 °C was found to be: Na + > K + > Li + , which is not consistent with the basicities of their corresponding metals. Experimental results and calculations showed that the alkali metal ions readily replace H + and Cu 2+ /Cu + ions. These exchanges result in the loss of Brønsted acid sites and migration of isolated Cu 2+ ions in Cu-SAPO-34, which decrease the NH 3 -SCR activity. Both the basicity and ion diameter will affect the exchanging behavior of an alkali ion. Na + and Li + ions will influence both H + and Cu 2+ /Cu + ions but K + ions only preferably replace the H + . We hypothesize that K + cannot enter into a small ring (6-membered ring) to replace a Cu 2+ /Cu + ion because of its large ion diameter. The displaced Cu 2+ /Cu + ions will transfer to adjacent unbonded Al site to form a CuAlO 2 species.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Jiahao Chen,Bin Wang,Kai Yuan,Yutang Kang,Shasha Feng,Feng Han,Hongmiao Wu,Rongfei Zhou,Zhaoxiang Zhong,Yiqun Fan,Weihong Xing
The SiC catalytic membrane combining dust removal and denitration can realize the efficacious treatment of atmospheric pollutants. Unfortunately, a large amount of SiO 2 , formed by the partial oxidation of SiC at a high temperature, results in the decreased chemical resistance of SiC catalytic membrane. In addition, the complicated preparation processes and susceptible to loss of catalytic components under harsh conditions restrict the industrial application of SiC catalytic membranes. Here, the Cu-SAPO-34(D)/SiC catalytic membranes were directly prepared via a facile one-pot hydrothermal synthesis method, which ingeniously utilized the generated SiO 2 as a Si source to participate in the growth of Cu-SAPO-34 zeolites. Excellent binding strength and chemical resistance were simultaneously realized for the SiC catalytic membranes. As a comparison, a Cu-SAPO-34(I)/SiC catalytic membrane was fabricated via the conventional two-step ion-exchange method. The 0.2 Cu-SAPO-34(D)/SiC (Cu molar ratio of 0.2) achieved the best NH 3 -SCR performance among the prepared catalytic membranes for its highly active copper and oxygen species, abundant Lewis acid sites and remarkable redox capacity. When implementing the simultaneous removal of NO and PM, the 0.2 Cu-SAPO-34(D)/SiC catalytic membrane achieved a high NO degradation performance of 98% from 200 to 280 °C, coupled with an excellent PM 0.3 (model dust with average size of 300 nm) filtration performance of 99.99%. These results were better than those of the Cu-SAPO-34(I)/SiC catalytic membrane (92% for NO degradation and 99.98% for PM 0.3 filtration). The one-pot in situ synthesis of Cu-SAPO-34(D)/SiC catalytic membrane with enhanced binding strength and chemical resistance provides a novel strategy for preparation of high-performance SiC catalytic membrane with double benefits.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry C
·
2024
·
IF 3.3
Fumei Wang,Qi Cai,Xinhua He,Boxiong Shen,Leila Negahdar,Shuo Feng,Andrew M. Beale
Cu/SAPO-34 catalysts have been widely used for the reduction of NOx from diesel exhaust by ammonia-selective catalytic reduction (SCR). Sulfur poisoning remains a challenge for Cu/SAPO-34 catalysts in NH3–SCR, restricting its application. In this study, Cu/SAPO-34 samples containing a mixture of Cu species comprising isolated Cu2+ located in the 6MR, Cu(OH)+ in 8MR, CuO clusters/nanoparticles, and Cu+ species were prepared. The Cu speciation during SO2 and hydrothermal aging of Cu/SAPO-34 SCR catalysts was subsequently studied. While hydrothermal aging had little effect on catalytic activity, the sulfur-aged sample exhibited deterioration in NH3–SCR activity over the temperature range of 100–575 °C. The breakage and collapse of the zeotype framework and chemical deactivation of the Cu/SAPO-34 catalyst after exposure to SO2 and H2O took place. A combination of X-ray photoelectron spectroscopy (XPS) and TGA-DT-DSC revealed the presence of ammonium bisulfate, copper bisulfate/sulfate, aluminum sulfate, and sulfuric acid after SO2 and H2O copoisoning under SCR conditions. Furthermore, Cu(OH)+ tended to migrate to form isolated Cu2+ and Cu+, as well as agglomerate to form CuO particles. Density functional theory (DFT) calculations revealed that SO2 and O2 could readily be absorbed by CuO particles to form stable copper bisulfate/sulfate species with the following order of preference: CuO > Cu+ > Cu2+ > Cu(OH)+. In contrast, Cu(OH)+ was less prone to be poisoned by easily releasing SO3 than other Cu species sites.
研究领域:
环境科学
·
催化化学
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2019
·
IF 4.888
Yuhan Ma,Huawang Zhao,Cuijuan Zhang,Yingnan Zhao,Hong Chen,Yongdan Li
Cu-SSZ-13 is a highly active catalyst to remove NO x in the emission of diesel-powered engine. However, the enhancement of its stability in high-temperature (HT) hydrothermal conditions is a well-known challenge in application. This work presents a simple strategy to significantly improve its hydrothermal stability under HT hydrothermal condition by mechanically mixing another CHA type zeolite, Cu-SAPO-34. Both the two zeolites are synthesized via one-pot method, mixed in different ratios, and treated in 10% H 2 O/air at 750 °C for 16 h. The mixed samples are characterized before and after the hydrothermal treatment, and tested in NH 3 -SCR from 150 to 550 °C. The results show the activity of the hydrothermally treated catalysts increases with the increase of the amount of Cu-SAPO-34 up to 50 wt% in the mixed sample. The hydrothermal stability of Cu-SSZ-13 is obviously enhanced by mixing with Cu-SAPO-34. The dealumination is suppressed during the hydrothermal treatment; the framework and the isolated Cu 2+ sites are largely maintained in Cu-SSZ-13. This is attributed to the interaction between the two CHA zeolites during the hydrothermal treatment. We propose the delivery of extra-framework P species from Cu-SAPO-34 to Cu-SSZ-13 is critical to enhance the HT hydrothermal stability.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Sciences
·
2019
·
IF 3.556
Yue Ma,Xiaodong Wu,Junyu Zhang,Rui Ran,Zhichun Si,Duan Weng
Selective catalytic reduction (SCR) with urea catalyzed by Cu-SAPO-34 is an effective method to eliminate NO x from diesel exhaust . However, urea-related deposits may form during cold-start and urban driving due to low exhaust temperatures. The activity of Cu-SAPO-34 at 175°C is significantly degraded by urea exposure, and 300°C is required for regeneration. Through in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed hydrolysis studies, the dominant stable deposit at 175°C is identified as biuret, which can be eliminated at 300°C. The urea-derived deactivation and regeneration mechanisms of Cu-SAPO-34 were compared with those of anatase-supported catalysts.
研究领域:
催化
·
环境工程
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
·
2022
·Vol. 97
·期 10
·2834-2843
·
IF 3.709
Yue Cao,Boyuan Chen,Yongli Dong,Yujun Zhu,Zhibin Li
BACKGROUND A series of Cu-SAPO-34 samples were prepared with different copper sources and addition of tetraethylenepentamine (TEPA) by a one-pot method, which were applied for selective catalytic reduction of NO x with ammonia (NH 3 -SCR). RESULTS Various measurements were carried out to investigate the effect of TEPA addition and copper sources used on sample properties. The results indicated that Cu-SAPO-34 obtained with the addition of TEPA using copper citrate (Cu-SAPO-34-TC) displayed over 90% NO x conversion at 150–500 °C and excellent H 2 O and SO 2 resistance in NH 3 -SCR. This is because the addition of TEPA can control the formation of isolated Cu 2+ species located at the junction of D6R in CHA cage, Site (I), which is regarded as a more easily approachable site to adsorbates (NH 3 and NO) than others, thus leading to the excellent NH 3 -SCR performance. Further study demonstrated that the Cu-SAPO-34-TC catalyst shows much wider temperature window and more hydrothermal stability due to a greater amount of surface isolated Cu 2+ , fewer Si islands and more Al(IV) species. CONCLUSIONS The excellent activity of the Cu-SAPO-34-TC catalyst can be attributed to the addition of TEPA, which is beneficial for controlling the isolated Cu 2+ at Site (I) as well as inhibiting the aggregation of CuO species. Various characterizations also confirm that more surface Cu 2+ can be produced using copper citrate as copper source. © 2022 Society of Chemical Industry (SCI).
研究领域:
催化材料
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）