文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第1至12个,产品总数14个

设置提升方向
Dy3 掺杂
MATERIALS CHEMISTRY AND PHYSICS · 2024 · IF 4.3

Effect of Dy3+ ion doping on magnetothermal and dielectric properties of GdCrO3

Zheng Li,Yuling Su,Yuying Zuo,Gaoshang Gong,Yaran Duan,Minghao Wang,Maocai Wei,Yongqiang Wang

In this paper, the crystal structure, vacancies, magnetoelectric properties and magneto-thermal properties of Gd 1- x Dy x CrO 3 (0 ≤ x ≤ 0.5) samples were reported. In crystal structure analysis, after doping Dy 3+ , the lattice constant and the grain size of the sample decreases. The results of positron annihilation lifetime study indicates that the overall electron density near defect increases and that appeared as a gradual decreasing trend of τ 2 with Dy 3+ concentration. The ferromagnetism of the sample gradually decreased after doping, and the T N (Cr) of the sample decreased systematically with increasing concentration of Dy 3+ . Moreover, the introduction of Dy 3+ inhibited the magneto-electric coupling and weakened the magneto-thermal properties of the samples. This result reveals the effect of Dy 3+ doping on the structure, magnetic properties, magnetothermal and dielectric properties of GdCrO 3 .

研究领域: 材料科学 · 物理学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF FLUORESCENCE · 2025 · IF 3.1

Template-Assisted Synthesis of Dy3+-Doped Bi2SiO5 Nanospheres with Excellent Luminescence and Thermal Stability

Chen Dongxun,Lv Xulong,Liang Yanjie

In this work, Dy 3+ -doped Bi 2 SiO 5 nanoparticles with uniform spherical morphology and narrow size distribution have been successfully synthesized using a facile template-assisted approach. The effects of sintering temperature and Dy 3+ doping concentration on the phase composition, morphology, and luminescence properties of Bi 2 SiO 5 :Dy 3+ nanophosphor are systematically investigated through X-ray diffraction, scanning electron microscopy, and photoluminescence (PL) spectroscopy. X-ray diffraction results confirm that the synthesized Bi 2 SiO 5 :Dy 3+ nanospheres exhibit a pure tetragonal phase. Meanwhile, the phosphor particles are composed of monodisperse nanospheres with an average diameter of approximately 265 nm. Upon excitation at 388 nm, intense photoluminescence is noted in the blue ( 4 F 9/2 → 6 H 15/2 ) and yellow ( 4 F 9/2 → 6 H 13/2 ) spectral regions due to the characteristic emissions of Dy 3+ ions. Temperature-dependent PL spectra reveal that the optimized Bi 2 SiO 5 :2.5%Dy 3+ nanospheres maintain extraordinary luminescence thermal stability, retaining 81.0% of its emission intensity at 423 K compared to 303 K. The phosphor also showed remarkable color stability, with CIE chromaticity coordinates shifting minimally from (0.377, 0.413) at 303 K to (0.373, 0.407) at 423 K. This newly developed Bi 2 SiO 5 :Dy 3+ nanospheres exhibit commendable PL properties, enabling them as promising candidates for yellow phosphors in LEDs and display applications.

CAS / MDL: 35725-30-5
研究领域: 材料科学 · 光学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2023 · IF 5.2

Low-temperature-sintering of Co2Z ferrite materials via Dy3+ ion doping for use in high-frequency applications

Ying Zhang,Jie Li,Chenqing Liao,Yang Xiao,Bing Lu,Shuai Wang,Yingli Liu,PengJie Zhang

According to this study, Co 2 Z ferrite is suitable for applications in high-frequency antennas. Ba 3 Co 2 Fe 24-x Dy x O 41 samples with different values of Dy 3+ doping concentration (x) in the range of 0.00–0.25 were prepared in the study by employing solid-state sintering and 2.5 wt% Bi 2 O 3 sintering aids. A systematic analysis of the physical phase structure, microstructure, and magnetic dielectric properties of the samples was also performed. The X-ray diffraction patterns of the samples showed that doping with Dy 3+ ions and the addition of the Bi 2 O 3 sintering aid had not changed the physical structure of the sample material, indicating that the material was still a Z-type hexagonal ferrite. In addition, according to the magnetic hysteresis loops of the samples, all six groups of them exhibited typical soft magnetic properties . With an increase in the Dy 3+ ion doping concentration, the saturation magnetization intensity and coercivity of the samples initially increased and then decreased. The sample with a Dy 3+ ion doping concentration of 0.15 had the most uniform grain distribution, largest density, and smallest porosity among the samples. Additionally, that sample had the maximum values of the real parts of the magnetic permeability (7.89) and permittivity (13.90) while having a low magnetic loss (tanδ μ ≤0.04) and a low dielectric loss (tanδ ε ≤0.03). Thus, this type of magnetic dielectric materials will have significant potential for use in high-frequency antenna applications.

研究领域: 材料科学 · 电磁学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PHYSICS LETTERS A · 2019 · IF 2.087

Luminescence property improvement of Ba2LaSbO6:Mn4+ phosphor by using Dy3+ or H3BO3

Renping Cao,Longxiang Xu,Yaqin Ran,Xinyan Lv,Siling Guo,Hui Ao,Ting Chen,Zhiyang Luo

Ba 2 LaSbO 6 :Mn 4+ , Ba 2 LaSbO 6 :Mn 4+ , Dy 3+ , and Ba 2 LaSbO 6 :Mn 4+ , H 3 BO 3 phosphors are synthesized in the air by high temperature solid state reaction method. The particle sizes and sintering degree of Ba 2 LaSbO 6 :Mn 4+ phosphor may be changed by doping Dy 3+ ion and H 3 BO 3 . When the small amount of Dy 3+ ion and H 3 BO 3 are codoped, the emission intensity of Ba 2 LaSbO 6 :Mn 4+ phosphor can be enhanced 1.2–1.3 times and the quantum efficiency of Ba 2 LaSbO 6 :Mn 4+ phosphor can be improved. The lifetime of Ba 2 LaSbO 6 :Mn 4+ phosphor may be changed by doping Dy 3+ ion and H 3 BO 3 . The experimental results are valuable in research of luminescence property of Mn 4+ -doped luminescence materials.

研究领域: 材料科学 · 光学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE AMERICAN CERAMIC SOCIETY · 2023 ·Vol. 106 ·期 6 ·3654-3662 · IF 3.9

Dy3+-doped Y2Zr2O7 highly transparent ceramics for ultraviolet excitable warm white light-emitting applications

Kailei Lu,Wenhan Han,Gang Cheng,Xinghua Zhu,Shirui Li,Hao Guo,Bosen Gu,Yucheng Ye,Jianqi Qi,Tiecheng Lu

Attaining effective warm white light emitting in functionally advantageous transparent polycrystalline ceramics is vitally important to guarantee the development of both human and botanical systems. In response to this aim, a series of Dy 3+ -doped Y 2 Zr 2 O 7 (YZO) transparent ceramics were prepared via a solid-state reaction and vacuum sintering approach in this work. These fabricated ceramics show high transparency, where the in-line transmittance at 700 nm is about 76%, which is very close to the theoretical limit (78%). In addition, under the excitation of UV light sources (358 and 384 nm), strong warm white light emissions were observed in these YZO:Dy transparent ceramics. The corresponding photoluminescence characteristics and mechanisms of YZO:Dy ceramics are investigated carefully. The Dy-doped YZO ceramics integrate with high transparency and UV-excitable warm white light emission properties, making them promising light-emitting converter materials for light-emitting source applications.

CAS / MDL: 1308-87-8
研究领域: 材料科学 · 光学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY · 2012 ·Vol. 12 ·期 1 ·151-158 · IF 1.563

Molten Salt Synthesis and Luminescent Properties of YVO4:Ln (Ln = Eu3+, Dy3+) Nanophosphors

Liu Chenglu,Wang Fang,Jia Peiyun,Lin Jun,Zhou Zhiqiang

Eu3+ and Dy3+-doped YVO4 nanocrystallites were successfully prepared at 400 °C in equal moles of NaNO3 and KNO3 molten salts. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, transmission electronic microscopy (TEM), photoluminescence (PL) spectrum and lifetime were used to characterize the nanocrystallites. XRD results demonstrate that NaOH concentration and annealing temperature play important roles in phase purity and crystallinity of the nanocrystallites, the optimum NaOH concentration and annealing temperature being 6:40 and 400 °C respectively. TEM micrographs show the nanocrystallites are well crystallized with a cubic morphology in an average grain size of about 18 nm. Upon excitation of the vanadate group at 314 nm, YVO4:Eu3+ and YVO4:Dy3+ nanocrystallites exhibit the characteristic emission of Eu3+ and Dy3+, which indicates that there is an energy transfer from the vanadate group to the rare earth ions. Moreover, the structure and luminescent properties of the nanocrystallites were compared with their bulk counter-parts with same composition in detail.

研究领域: 材料科学 · 光学
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Materials Science and Engineering B-Advanced Functional Solid-State Materials · 2022 · IF 3.407

Dy3+:Ca3Gd2(BO3)4 single crystal with disordered structure: A promising yellow laser candidate

Xiaoting Chen,Lehui Liu,Yisheng Huang,Feifei Yuan,Lizhen Zhang,Zhoubin Lin

In this article, a series of Dy x Ca 3 Gd 2-x (BO 3 ) 4 (x = 0.02–0.2) polycrystalline compounds were synthesized by solid-state reaction to select the optimum concentration for single crystal growth, after then a 6.36 at.% Dy 3+ :Ca 3 Gd 2 (BO 3 ) 4 (Dy:CGB) single crystal with a disordered structure was successfully grown by the Czochralski method . The spectroscopic properties and Judd-Ofelt analyses of the crystal were carried out. Focusing on the absorption cross-section at 453 nm corresponding to the emission bands of InGaN laser diodes, the Dy:CGB crystal has a comparatively large value of 0.95 × 10 -21 cm 2 with a full width at half maximum (FWHM) of 10.2 nm. The yellow light emission cross-section at 576 nm is 2.2 × 10 -21 cm 2 with a FWHM of 14.0 nm. The Judd-Ofelt parameters Ω 2 , Ω 4 and Ω 6 were obtained to be 2.79 × 10 -20 cm 2 , 2.10 × 10 -20 cm 2 and 2.28 × 10 -20 cm 2 , respectively. The fluorescence lifetime of 4 F 9/2 → 6 H 13/2 transition was measured to be 0.26 ms. These results reveal that the Dy:CGB crystal is a promising yellow laser candidate.

研究领域: 材料科学 · 光学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2022 · IF 4.171

Color tunable warm white emitting whitlockite-type phosphor applied in optical thermometry

Yang Jin,Lefu Mei,Ke Su,Qingfeng Guo,Libing Liao

Whitlockite-type structure phosphors have received extensive attention and research due to their adjustable chemical compositions in isomorphic compounds and providing rich crystal positions for doping activators. Ca 2.6 K 0.2 La 0.2 (PO 4 ) 2 whitlockite-type phosphors with Dy 3+ singly doping and Dy 3+ , Eu 3+ co-doping were prepared via high temperature solid-phase reaction, and the crystallographic characteristics, luminescence properties and temperature sensing performance were investigated in detail. The prepared phosphors are pure phase and both Dy 3+ and Eu 3+ enter into the matrix and produce blue, yellow and red emissions. The CCT values of the emitted light from Ca 2·6 K 0·2 La 0·2 (PO 4 ) 2 : Dy 3+ , Eu 3+ phosphors increase with the Eu 3+ concentration rises, changing from cold white light to warm white light. The integrated emission intensity of Dy 3+ in the phosphor decreases with the change in the doping ratio of Dy 3+ and Eu 3+ , causing by the energy transfer from Dy 3+ to Eu 3+ . The Ca 2·6 K 0·2 La 0·13 (PO 4 ) 2 :0.06Dy 3+ , 0.01Eu 3+ phosphor shows temperature sensing performance based on FIR technique, with the maximum relative sensitivity calculated to be 0.181% K −1 . All the results reveal that the Ca 2·6 K 0·2 La 0·2 (PO 4 ) 2 : Dy 3+ , Eu 3+ phosphors can be applied to w-LEDs and display devices, and can be used as a new type of optical thermometer.

研究领域: 材料科学 · 光学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF NON-CRYSTALLINE SOLIDS · 2021 · IF 3.531

Silicate-clad Dy3+ doped multi-component phosphate glass core glass fiber for yellow laser applications

Shuhang Tian,Yipeng Lun,Yongsheng Sun,Dongdan Chen,Guowu Tang,Qi Qian,Zhongmin Yang

In this work, strong yellow emission was obtained in Dy 3+ doped multi-component phosphate glass due to its high asymmetry and covalency of the local field and high phonon energy. The internal quantum efficiency was measured to be 39.27% and the figure of merit was calculated to be 210.53 pm 2  × μs. What is more, silicate-clad Dy 3+ doped multi-component phosphate core glass fiber was successfully drawn by using a rod-in-tube method, which has a strong fluorescence emission in yellow spectra band. The Dy 3+ doping concentration is 2.6 wt.%, which is much larger than that of Dy 3+ doped (0.2 wt.%) ZBLAN fiber. These results suggest that the silicate-clad Dy 3+ doped multi-component phosphate glass fibers are potential host matrices for yellow laser.

研究领域: 材料科学 · 光学工程
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
IEEE Photonics Journal · 2025 · IF 2.4

Investigation of Photoluminescence Properties and Random Lasing Behaviors in Dy3+-doped Sr2MgMoO6 Phosphors

Yexi Sun,Qianyu Huang,Xin Guo,Maohui Yuan,Kai Han

Lanthanide-doped phosphors are of importance in the practical applications. In this work, we investigated the photoluminescence properties and random lasing behaviors of Dy3+-doped Sr2MgMoO6 phosphors synthesized by the high-temperature solid-state method. The SEM, XRD, and EDS with elemental mapping results reveal the successful fabricating of the high-quality Sr2MgMoO6 phosphors and confirm the uniform distribution of constituent elements. Structural characterization through precise Rietveld refinement confirmed that the material crystallizes in a tetragonal system with space group I4/m (No. 87), and its refined lattice parameters are also determined. The effect of different Dy3+ doping concentrations on the luminescent properties was analyzed. The optimal doping concentration for achieving efficient luminescence is fixed at 0.08 mol%. Typical emission peaks centered at 484 nm, 576 nm, 656 nm, and 756 nm of Dy3+ were observed under the blue light excitation. Additionally, random lasing phenomena were observed in the Sr2MgMoO6 phosphors when excited with a 355 nm pulsed laser under varying pump power densities. The random lasing behaviours were confirmed by the emergence of narrow emission peaks with a narrow full width at half maximum (FWHM) and the dependence of the intensity on the excitation intensity. This work highlights the potential of Dy3+-doped Sr2MgMoO6 phosphors as efficient luminescent materials and demonstrates their application in random lasing, which opens new possibilities for their use in optoelectronic and laser technologies.

研究领域: 材料科学 · 光电子学 · 光子学 · 固体物理 · 激光技术
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2025 · IF 3.6

Application of high thermal stability inorganic scintillator material Ba1.31Ca0.69SiO4:Eu2+,Dy3+ in X-ray imaging

Kuo Shen,Yahong Jin,Yanmei Li,Yihua Hu

Inorganic scintillator materials have garnered widespread attention due to their applications in high-energy X-ray detection and imaging. However, developing materials that possess both high thermal stability and the capability to provide high-resolution X-ray imaging remains a significant challenge in this field. This article reports the synthesis of Ba 1.31 Ca 0.69 SiO 4 inorganic scintillator materials doped with Eu 2+ and Dy 3+ through a high-temperature solid-phase method. Their structure, photoluminescent properties under visible light and X-ray excitation, and thermoluminescence characteristics were thoroughly characterized. Experimental results indicate that the material's traps were enriched through the aliovalent substitution of Dy 3+ , enhancing the afterglow at room temperature. Under 350 nm excitation, the material demonstrated excellent thermal stability (maintaining 90% of its intensity at 150 °C compared to 30 °C) and a high quantum efficiency (IQE = 96.64 %). Furthermore, under X-ray excitation, the material exhibits a high electron storage capacity, which can be read out under near-infrared light at 870 nm, and can be rapidly erased under heating conditions or under visible light at 470 nm. Finally, we prepared flexible films using the phosphor, demonstrating a spatial resolution of 11.9 lp/mm −1 under X-rays, as well as showcasing the real-time and delayed imaging capabilities of the flexible film under X-ray exposure.

CAS / MDL: 1308-96-9
研究领域: 材料科学 · 光学 · 医学影像
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2021 ·Vol. 45 ·期 45 ·21066-21073 · IF 3.591

A novel Dy3+-activated single-phase white light-emitting phosphor for solid-state lighting

Meng Kuang,Junhao Li,Jinjun Zhang,Jianhong Ding,Ziwang Zhang,Kangrong Huang,Nan Yang,Ziheng Zhang,Mingming Yang,Haiyong Ni

The radius of trivalent scandium ions is much smaller than those of other rare earth ions and thus research studies targeting the substitution of the scandium site with other light-emitting rare earth ions are rarely reported. In our present work, special attention is paid to the effect of Dy3+ doping on the crystal structure, atomic site occupancy and luminescence properties of the ScCaBO4 host as Dy3+ often serves as an individual activator for single-phase white light-emitting phosphors. Herein a series of ScCaBO4:Dy3+ phosphors were prepared by solid-state reactions. The phase composition was recorded by X-ray diffraction analysis and XRD refinement reveals that a pure phase could be maintained even when the Dy3+ concentration reaches 11%. Scanning electron microscopy (SEM) was utilized to observe the morphology and EDS mapping was used to investigate elemental distribution. The luminescence performances of the phosphors were investigated using UV-vis diffuse reflectance spectra, steady-state excitation and emission spectra and also transient luminescence decays. Dy3+ luminescence can be ascribed to its 4F9/2 → 6H15/2, 6H13/2 and 6H11/2 transitions, producing blue, yellow and red emissions. The Dy3+ concentration was further optimized at 3%, at which the CIE coordinates and fluorescence lifetimes were (0.425, 0.413) and 0.546 ms, respectively. Thermal quenching studies of the ScCaBO4:0.03Dy3+ phosphor show that Dy3+ luminescence at 400 K can maintain 60.91% of its initial value measured at room temperature. All the results indicate that the ScCaBO4:Dy3+ inorganic phosphors could be a promising single component phosphor for near-UV chip based WLEDs.

研究领域: 材料科学 · 光学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。