JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Jun Liu,Hui Wang,Wen-Yao Zhu,Heng-Xue Xie,Xin Li,Wen-Juan Li,Ge Bai,Meng-Jie Chang,Xiao-Jiao Chai,Hui-Ling Du,Shi-Jie Song
We present a novel method to facilely prepare magnetically recoverable AgCl/Fe 3 O 4 @MIL-100(Fe) (ACFM) nanostructures for photocatalytic degradation of rhodamine B (RhB). The ACFM was directly prepared via a simple successive ionic layer adsorption and reaction (SILAR) deposition of MIL-100(Fe) on solvothermal synthesized Ag/Fe 3 O 4 nanoparticles , in which process Ag was completely oxidized into AgCl concurrent with the formation of MIL-100(Fe). The ACFM prepared with 15 SILAR cycles exhibits 92.9% efficiency towards photodegrading RhB within 30 min under visible light illumination, which is higher than that of the individual structure of AgCl/Fe 3 O 4 , Ag/Fe 3 O 4 @MIL-100(Fe) or Fe 3 O 4 @MIL-100(Fe). The remarkably enhanced photocatalytic performance is attributed to the abundant active sites and sufficient visible light response of MIL-100(Fe), as well as effective charge separation at the heterojunction interface between AgCl and MIL-100(Fe). Furthermore, the obtained ACFM can be quickly separated from the pollutant solution with a magnet and possesses good stability for recycling photocatalysis . In light of the study, the ACFM nanostructures are believed to be applied as promising photocatalysts for practical applications.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Sijia Li,Jianan Cui,Xia Wu,Xuan Zhang,Qi Hu,Xiaohong Hou
Metal-Organic Frameworks (MOFs) are efficient adsorbent and catalyst, however, the prepare of MOFs can be extremely time consuming. The rapid in situ microwave synthesis process offers the possibility of MOFs to a large-scale application. In this study, Fe 3 O 4 @MIL-100(Fe) was rapidly prepared via microwave in 30 min using Fe 3 O 4 as metal precursor and applied as the adsorbent and photocatalyst to remove diclofenac sodium (DCF) from water. Fe 3 O 4 @MIL-100(Fe) exhibited an excellent adsorption effect to DCF with the maximum adsorption capacities of 400 mg/L. The presence of H 2 O 2 could promote the removal of DCF during photocatalytic process. Approximately 99.4% of the DCF was removed in Fe 3 O 4 @MIL-100(Fe)/vis/H 2 O 2 system via adsorption removal and consequent photocatalytic degradation . The high efficiency was attributed to the large BET surface area (1244.62 m 2 /g) and abundant iron metal sites (Fe(III) and Fe(II)) of Fe 3 O 4 @MIL-100(Fe). The adsorptive, photocatalytic property of Fe 3 O 4 @MIL-100(Fe) and the Fenton-like reaction were the main mechanisms for DCF removal. TOC analyzer was served to assess the mineralization of solutions treated by Fe 3 O 4 @MIL-100(Fe)/vis/H 2 O 2 in 12 h. High elimination of TOC (87.8%) was observed during the DCF mineralization process. In addition, the major products were illuminated using HPLC-Q-TOF-MS and DCF degradation pathways were also proposed.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2016
·Vol. 183
·期 8
·2467-2472
·
IF 4.831
Yang Yang,Ma Xiaowei,Feng Fan,Dang Xueping,Huang Jianlin,Chen Huaixia
The article describes the synthesis of core-shell magnetic nanoparticles (MNPs) of the type Fe 3 O 4 @MIL-100 (MIL standing for Material Institut Lavoisier), and their application as sorbent for magnetic solid-phase extraction (MSPE) of triclosan. The MNPs were prepared via circular self-assembly of ferric chloride and benzenetricarboxylic acid. The functionalized MNPs were characterized by transmission electron microscopy, FTIR and thermogravimetry. Following extraction, triclosan was eluted with ammoniacal methanol and then submitted to HPLC with UV detection. The amount of magnetic microspheres, sample pH and ionic strength, adsorption time, desorption time, desorption solvent and the volume of the eluent were optimized. Under optimum conditions, the method showed good linearity in the 0.1 to 50 mg·kg −1 triclosan concentration range in toothpaste samples. Other features include (a) intra-day and inter-day relative standard deviations (RSD, for n = 4) of <5.5 %, (b) a 30 μg·kg −1 limit of detection, and (c) extraction recoveries between 90.86 % and 101.1 %. The method was successfully applied to the determination of triclosan in children’s toothpaste.
The article describes the synthesis of core-shell magnetic nanoparticles (MNPs) of the type Fe 3 O 4 @MIL-100, and their application as sorbent for magnetic solid-phase extraction (MSPE) of triclosan.
研究领域:
分析化学
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Jiabi Xu,Jiayi Peng,Xiangting Wang,Xiaohong Hou
Nanozymes have gradually become a research hotspot in the field of enzymology, benefiting from their low cost, high stability, and availability. To break through the limitation that conventional nanozymes exert peroxidase-like (POD-like) activity under only acidic conditions, we rationally designed Fe3O4@MIL-100(Fe) with excellent superparamagnetism and catalytic activity. An optimization of the microwave-assisted in situ synthesis conditions was carried out to obtain the highest POD-like activity of the nanozyme under nearly neutral conditions. Adenosine triphosphate (ATP) was appointed as an auxiliary regulator to further amplify the activity of the nanozyme Fe3O4@MIL-100(Fe). A series of behaviors related to enzymology and the mechanism of ATP-assisted enhancement were further explored. Consequently, a colorimetric sensing strategy was proposed for the one-step detection of cholesterol with a linear range of 0.05–0.4 mM and a limit of detection (LOD) of 1.3 μM (3.3 δ/S). The result of the present work implied that the established one-step platform could be successfully applied to the detection of cholesterol in actual samples. From the nanozyme synthesis to the colorimetric sensing process, the concepts of time savings and straightforwardness were always upheld and satisfactorily implemented. Most importantly, Fe3O4@MIL-100(Fe) could be a great potential biocatalyst candidate for the development of the corresponding commercial kits.
研究领域:
生物化学
·
医学诊断
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 31
·12596-12610
·
IF 4.5
Liu Jun,Wang Hui,Chang Meng-Jie,Li Wen-Juan,Bai Ge,Xie Heng-Xue,Li Xin,Du Hui-Ling,Song Shi-Jie
MIL-100(Fe) has been demonstrated as a commonly used photocatalyst but is limited by the deficient charge separation efficiency and difficult recovery. In this work, by taking advantages of the strong plasmonic absorption and electron conductivity of Ag nanoparticles, as well as the fast magnetic response of the Fe 3 O 4 , core/shell Ag/Fe 3 O 4 @MIL-100(Fe) (AFM) was facilely prepared by a direct hydrothermal reaction between H 3 btc and Ag/Fe 3 O 4 (AF) for photo-Fenton degradation of RhB assisted by H 2 O 2 . Specifically, the Fe 3 O 4 in AF acted as both ion precursor and protector to inhibit Ag aggregation to obtain uniform and dispersed core/shell AFM. By adjusting the MIL-100(Fe) thickness and the Ag proportion, the optimum AFM exhibits superior photo-Fenton activity to decompose 88.5% RhB within 30 min under visible-light irradiation and H 2 O 2 addition, which is much higher than that of AFM in the presence of either light (58.5%) or H 2 O 2 (46.6%) due to the synergistic effects of visible-light absorption by MIL-100(Fe) and ·OH generation from H 2 O 2 . Moreover, the catalyst can be collected conveniently for its strong magnetic responsibility. This work may be beneficial to the development of effective photo-Fenton catalysts. Graphical abstract A novel magnetically recyclable Ag/Fe 3 O 4 @MIL-100(Fe) with special core/shell structure was facilely synthesized by hydrothermal method with superior photo-Fenton activity for dye degradation.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2023
·
IF 3.4
Du Juan,Liu Kai,Liu Jialei,Zhao Dianbo,Bai Yanhong
Herein, a novel core-shell material Fe 3 O 4 @MIL-100(Fe) was synthesized for developing a novel LFIA by a two-step solvothermal method with good magnetic properties and high specific surface area. It was used as both magnetic separation and label agents in LFIA for the detection of Listeria monocytogenes . The enrichment of target bacteria can be achieved quickly and easily by direct adsorption of Fe 3 O 4 @MIL-100(Fe) on the bacteria and by the action of an applied magnetic field. It was beneficial in separation and concentration of target bacteria from food samples. The Fe 3 O 4 @MIL-100(Fe)-bacterial was then detected by the anti- Listeria monocytogenes antibody on the T line under the capillary action of the LFIA strip, resulting in the formation of a visible orange band. Under the optimal conditions, there was a good linear relationship between the intensity of the T line and the quantity of Listeria monocytogenes in the range of 10 5 -10 8 CFU mL − 1 , with a visual detection limit of 3.3 × 10 6 CFU mL − 1 . The strip showed strong specificity for L. monocytogenes , and the detection could be finished in 45 min, without the needing of pre-treatment. Thus, the proposed Fe 3 O 4 @MIL-100(Fe)-based strip was simple prepared, label-free, low cost, rapid and convenience.
研究领域:
分析化学
·
微生物学
·
食品科学
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2022
·
IF 5.304
Mingchun Lv,Da-Wen Sun,Hongbin Pu,Haofan Zhu
Recyclable surface-enhanced Raman scattering (SERS) substrates are beneficial to cost reduction and environmental protection and have always been a research topic with great interest. Herein, a core–shell-satellite structured SERS substrate Fe 3 O 4 @MIL-100(Fe)@Ag nanoparticles (FMAs) was developed, possessing versatile functionalities of adsorption, detection, degradation and recovery. Results showed that the MIL-100(Fe) with peroxidase-like activity as shell catalyzed H 2 O 2 to generate ·OH degraded pollutants within 5 min to achieve substrate cleaning, making FMAs recyclable for at least 5 times to sequentially detect different cationic dyes with high sensitivity, having low detection limits as low as 15.24 ng/L, 387.87 ng/L and 0.71 ng/g for crystal violet in deionized water, aquaculture water and tilapia, respectively. FMAs also showed good uniformity, reproducibility and stability, with a relative standard deviation value of 5.58 % between substrates and about 78.60 % SERS activity remained after 20 d storage at 4 °C. This FMAs substrate thus has great potential for selective detection of trace cationic dyes in food or other fields.
研究领域:
环境科学
·
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Xin Liang,Laishi Li,Yusheng Wu,Feng Liu,Yuzheng Wang
The efficiency of Fenton-like catalysts was critically affected by the rapid transfer of Fe 2+ /Fe 3+ , a process that was essential for the formation of active free radicals by H 2 O 2 . Herein, we synthesized CuS/Fe 3 O 4 @MIL-100(Fe) (CFM) ternary composites using hydrothermal and in-situ growth methods to enhance the degradation of oxytetracycline hydrochloride (OTC-HCl) in a Fenton-like photocatalytic system. The incorporation of CuS as a co-catalyst into the double iron-based system significantly enhanced photocatalytic activity, achieving a 95.31 % degradation efficiency for OTC-HCl within 50 min under optimized conditions. The catalyst had good reusability, has 86.64 % degradation efficiency after five magnetic recovery cycles, and still showed good catalytic performance in the presence of five different concentrations of common anions. Further analysis using active species quenching and electron paramagnetic resonance (EPR) experiments revealed the role of oxygen-containing radicals in the process. Liquid chromatography-mass spectrometry (LC-MS) and density functional theory (DFT) calculations provided OTC-HCl degradation pathways and intermediates. X-ray Photoelectron Spectroscopy (XPS) analysis indicated that CuS enhanced the performance of the bis-iron-based materials by improving the transfer efficiency of Fe 2+ /Fe 3+ and Cu + /Cu 2+ ions, which in turn accelerated the generation of reactive radicals from H 2 O 2 .
研究领域:
环境科学
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Wenjuan He,Zuopeng Li,Shengchen Lv,Mingxin Niu,Wenfeng Zhou,Jing Li,Runhua Lu,Haixiang Gao,Canping Pan,Sanbing Zhang
The Fe 3 O 4 @MIL-100(Fe) hybrid composites are successfully synthesized via an in-situ growth method and characterized using various techniques. The ability of the magnetic metal–organic framework to promote photo-Fenton like processes is investigated using levofloxacin as a representative substrate. The results show that the composite with a Fe 3 O 4 :MIL-100(Fe) mass ratio of 1:4 has a higher degradation efficiency (up to 93.4%) than Fe 3 O 4 , MIL-100(Fe), and the other fabricated composites. This higher catalytic activity is ascribed to the synergistic effect between Fe 3 O 4 and MIL-100(Fe), by which the quick separation of hole-electron pair from MIL-100(Fe) and the efficient reduction of Fe 3+ to Fe 2+ in the photo-Fenton reaction are mutually promoted. Moreover, the composite shows favorable recyclability without apparent loss of apparent photo-Fenton activity even after five cycles, and more importantly, can be recovered magnetically. The possible degradation mechanism and intermediates of levofloxacin in the photo-Fenton reaction have been tentatively proposed based on free radical quenching, electron paramagnetic resonance and mass spectrometry analysis. Finally, the developed Fe 3 O 4 @MIL-100(Fe) is successfully applied for the removal of levofloxacin from spiked wastewater with removal efficiencies ranging from 77.9 to 85.5%, which indicates that the proposed system has significant potential for wastewater treatment applications.
研究领域:
环境科学
·
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD SCIENCE
·
2024
·
IF 3.2
Juan Du,Zongshuang Li,Jiangli Guo,Kaidong Du,Zhijian Chen,Yanhong Bai
In this study, a pretreatment method based on a magnetic capture probe for the rapid isolation and enrichment of bacteria from raw pork was developed. The chitosan immobilized Fe 3 O 4 @MIL-100(Fe) was prepared as a capture probe for total bacterial counts through the electrostatic interaction of positively charged chitosan and the negatively charged substances on the surface of bacteria. The interference of matrix in pork samples on this method was studied and removed by differential centrifugation. The results showed the capture probe had a great selectivity binding and magnetic separation properties for the tested six common bacteria in pork. Under the optimal conditions, the capture efficiency of the bacteria (10 5 CFU mL −1 ) from pork surface samples was all above 90%. The capture efficiency of the bacteria in a homogenate system was greatly decreased due to the interference of sarcoplasmic protein and myofibrillar protein in pork. The matrix effect was mitigated by a differential centrifugation method, and the capture efficiency of all six bacteria was >80%. The developed magnetic separation method took 40 min and showed good isolation and enrichment properties of bacteria. Thus, the proposed method is expected to provide a simple, convenient, and time-saving pretreatment method for the detection of total bacterial counts in pork.
研究领域:
食品科学
·
微生物学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHIC SCIENCE
·
2017
·Vol. 55
·期 6
·662-668
·
IF 0.984
Ma Xiaowei,Feng Fan,Yang Yang,Dang Xueping,Huang Jianlin,Chen Huaixia
Fe3O4@MIL-100 (MIL, Material Institut Lavoisier) core–shell magnetic microspheres were prepared and applied as the sorbent for the magnetic solid phase extraction (MSPE) of N,N-diethyl-m-toluamide (DEET) in baby toilet water for the first time. The synthesized magnetic metal–organic frameworks were characterized by transmission electron microscope, infrared spectroscopy and thermogravimetric analysis. The functionalized magnetic microparticles showed excellent dispersibility in aqueous solution. The MSPE conditions were investigated in detail. Under the optimized conditions, an MSPE–high performance liquid chromatography method for the determination of DEET was developed. The method was linear in the concentration range from 5 to 500 μg L−1 for DEET in baby toilet water and good linearity (r2 > 0.9998) was obtained for the calibration curve. The limit of detection was 1.5 μg L−1. Both the intra-day and inter-day precisions (relative standard deviations) were <3%.
研究领域:
分析化学
·
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 11
·806
·
IF 3.2
Wang Hui,Liu Jun,Chang Meng-Jie,Li Jia,Feng Qing,Jia Bo
The weak light absorption, low charge separation efficiency, and poor recyclability severely restrict the practical application of heterogeneous photo-Fenton catalyst MIL-100(Fe). Herein, we report the synthesis of Fe 3 O 4 @MIL-100(Fe) with tunable structures via hydrothermal growth, using Fe(NO 3 ) 3 ·9H 2 O and H 3 btc as precursors on an Ag/Fe 3 O 4 template. Notably, Fe(NO 3 ) 3 ·9H 2 O serves dual roles: it acts as a precursor for MIL-100(Fe) formation and as an oxidizing agent to remove the Ag template. The microstructure of the resulting catalyst can be precisely regulated by varying the Fe 3⁺ dosage. By optimizing the Fe(NO 3 ) 3 ·9H 2 O dosage, the optimal hollow Fe 3 O 4 /MIL-100(Fe) catalyst is obtained, which exhibits excellent dispersion, a distinct core/shell structure, a larger specific surface area (312.6 m 2 /g), a smaller average pore diameter (4.9298 nm), strong magnetic separability, and superior photo-Fenton degradation performance (95.6% within 30 min). After 4 consecutive cycles, the degradation efficiency toward Rhodamine B (RhB) remains above 90%, demonstrating outstanding cycling stability. Electron spin resonance (ESR) analysis confirms that both ·O 2 ⁻ and ·OH are the dominant reactive oxygen species responsible for the catalytic degradation reactions.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）