Efficient capture and conversion of polysulfides by zinc protoporphyrin framework-embedded triple-layer nanofiber separator for advanced Li-S batteries
The practical application of Lithium-sulfur (Li-S) batteries is significantly inhibited by (i) the notable ‘shuttle effect’ of lithium polysulfides (LiPS), (ii) the corrosion of the lithium interface, and (iii) the sluggish redox reaction kinetics. The functional separator in the Li-S battery has the potential to provide the perfect solution to these problems. Herein a triple-layer multifunctional PVDF-based nanofiber separator, which contains GoTiN/PVDF layer on the top and bottom and ZnTPP/PVDF layer on the middle, is designed. The polarity and porous structure of this multifunctional separator can greatly improve the wettability of electrolytes and enhance the transportation of Li + . With the zinc-based porphyrin framework (ZnTPP) structure, this separator has a strong chemisorption and LiPS conversion ability, which greatly prevent the ‘shuttle effect’. Consequently, the designed multilayer separator showed excellent electrochemical performance. As a result, the cell with GoTiN@ZnTPP@GoTiN nanofiber membrane displayed an initial discharge capacity of 1180 mAh/g with a benign capacity retention of 65.9% at 0.5C and high coulombic efficiency of more than 98.5% after 100 cycles. Even at 2C, it can still release a capacity of 798 mAh/g. Moreover, the remarkable capacity of 591 mAh/g could be achieved with a high sulfur load of 5.76 mg/cm 2 under a current density of 0.1C. Based on these merits, this novel and scalable multifunctional separator is a promising candidate to replace the conventional PP separator for advanced Li-S batteries to deal with various challenges.
危险品化学品经营许可证（带存储）