KEY ENGINEERING MATERIALS
·
2020
·
IF 0
Yi Peng Wang,Song Yang,Yun Zhen Jia,Pei Jian Sun,Xue Hui Sun,Hong Bo Wang,Jun Wei Guo,Xiao Bing Zhang,Hui Min Liu,Cong Nie
In this study, carboxymethyl peanut shell (CPS) was prepared, and then peanut shell-based porous material (PPS) was obtained by the complexation reaction of CPS with Cu2+. The carboxymethyl content of CPS increased gradually with the increase of the amounts of monochloroacetic acid and sodium hydroxide, and the Cu2+ loading amount of PPS increased gradually with the increase of carboxymethyl content. The scanning electron microscope results showed that PPS-1, PPS-2, PPS-3 (PPS-1~3) had many nanoscale pores. The nitrogen adsorption-desorption results suggested that PPS-1~3 were all mesoporous materials with an average pore diameter of about 10 nm, while their Brunauer-Emmet-Teller surface area and pore volume of PPS-1 to PPS-3 increased gradually. Compared with the control cigarette, the release of HCN in cigarette mainstream smoke could be effectively reduced with the use of PPS-1~3, the reduction rate of HCN per total particulate matter were 54.9%, 63.1% and 67.0%, respectively.
研究领域:
材料科学
·
环境科学
·
烟草研究
✓ 已验证
DOI
CERAMICS INTERNATIONAL
·
2023
·
IF 5.2
Chunhao Wan,Jiayi Wang,Zexuan Li,Shansheng Yu,Xiaoyi Wang,Hongwei Tian
Microwave absorbing (MA) materials with yolk-shell structures have been extensively studied in impedance matching. However, the impedance matching achieved by the complementary effect of the core and the shell does not determine the reflection of the microwaves upon the occurrence at the first incidence. The interaction between the outer layer of materials and the electromagnetic waves significantly impacts the MA properties of materials. In this study, the impedance matching improvement method of the shell structure was further explored by preparing CoFe 2 O 4 @HCN (honeycomb carbon with N-doping) through the hydrothermal method followed by hydrolysis, polymerization, etching, and annealing. The resulting structure with heteroatoms doping provided the novel CoFe 2 O 4 @HCN with excellent impedance matching and multiple loss mechanisms contributing to MA process. The absorber with a filler loading of 40% exhibited an RL min of −68.03 dB with a matching thickness of 2.5 mm. The efficient absorbing bandwidth reached 5.92 GHz (a change from 11.92 to 17.84 GHz) at 1.99 mm thickness. Interestingly, these findings look promising for future synthesis and application of yolk-shell structure microwave absorbers.
研究领域:
材料科学
·
电磁工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
Materials Research Express
·
2021
·Vol. 8
·期 3
·035009
·
IF 1.62
Yipeng Wang,Yunzhen Jia,Xuehui Sun,Peijian Sun,Song Yang,Quanping Yan,Bin Peng,Jizhao Guo,Xiaobing Zhang,Cong Nie
In order to reduce the hydrogen cyanide (HCN) release in cigarette mainstream smoke, a new type of porous corncob (PCC) material which was different from traditional corncob-based activated carbon was prepared by a two-step chemical reaction of carboxymethylation and cupric ion complexation. Fourier Transformation Infrared Spectroscopy (FTIR) showed that the carboxymethyl group had been introduced onto the corncob, the carboxymethyl content and the cupric ion loading amount were measured. The x-ray photoelectron spectrometer (XPS) results showed that the Cu content on the surface of PCC was much higher than that of the whole material. The scanning electron microscope (SEM) and nitrogen adsorption-desorption results suggested that PCC had a porous structure. With the increase of the amounts of chloroacetic acid and sodium hydroxide in carboxymethylation reaction and the concentration of cupric ion aqueous solution in complexing reaction, the BET surface areas and pore volumes increased, while the most probable pore sizes of PCCs were close to each other. Compared with the control cigarette, the addition of PCC could effectively remove the HCN release in cigarette mainstream smoke, and the highest reduction rates of HCN per total particulate matter (TPM) was 72.4 %.
研究领域:
材料科学
·
化学
·
烟草研究
✓ 已验证
产品关联
DOI
高影响因子
Thermal Science and Engineering Progress
·
2023
·
IF 4.8
Shuai Guo,Guoliang Qi,Jialiang Gao,Deng Zhao,Kaixin Chen,Chenchen Zhao,Xingcan Li,Guangyu Li
Pyrolysis is an effective method for safely disposing of sewage sludge via conversion into a usable energy source. However, municipal sludge has a high protein content, which is a major source of NO x precursors. This study investigated the effect of CaO on NO x precursor formation during glutamate pyrolysis and demonstrated that CaO occupies the carbo x yl site of glutamic acid at 320 °C, which delays its decomposition and promotes the conversion of glutamic acid from a five- to a si x -membered ring. At 400 °C, heterocyclic nitrogen in the tar peaked from 4.87 to 53.87% after adding CaO. As the temperature increases to 480 °C, CaO might promote the conversion of heterocyclic nitrogen into tricyclic piperazine dione in the tar, which subsequently decomposed to produce HCN in large quantities. At 480 °C, CaO contributed to the decrease in pyrrole, pyridine, and quaternary nitrogen in the semi-coke from 24.81%, 12.93%, and 7.43% to 1.91%, 5.97%, and 1.43%, respectively and promoted HCN hydrolysis to form NH 3 . At 480–680 °C, CaO interacted with NH 3 to form CaCN 2 . The product of CaC x N y decomposition—CaC x —captured NH 3 . At high temperatures, CaO inhibited HCN release, which might be related to the reaction between CaO and HCN to form CaC x N y , subsequently reconverted into CaO at temperatures above 680 °C. These findings provide novel insights into the influence of CaO on amino acid pyrolysis to produce NO x precursors and the regulation of NO x precursor production.
研究领域:
环境科学
·
能源与燃料
✓ 已验证
产品关联
DOI
高影响因子
ENERGY & FUELS
·
2017
·
IF 3.091
Linlin Yi,Huan Liu,Geng Lu,Qiang Zhang,Jiaxing Wang,Hongyun Hu,Hong Yao
Considerable amounts of NOx are generated from the thermal utilization of solid wastes. To control NOx emission, we investigated the influence of mixed Fe/Ca additives on the generation of NOx precursors (HCN and NH3) during pyrolysis at 873, 1073, and 1273 K. Protein, proline, and phenylalanine were selected as model compounds to represent the primary nitrogen forms in typical solid wastes, such as biomass and sludge. According to the results, the iron effect is a remarkable property that enables the obvious reduction of NH3. This was most likely because NH3 was consumed by iron compounds to generate FeNx. Iron compounds facilitated thermal cracking of heterocyclic N with the release of HCN. Ca(OH)2 promoted the conversion of HCN to NH3 and fixed HCN to form CaCxNy simultaneously. These intermediates (FeNx and CaCxNy) play important roles in the reduction of NOx precursors. A lower emission of NOx precursors was observed with mixed Fe/Ca additives than with either Fe or Ca individually. This is because the generation of Ca2Fe2O5 enhanced the tranformation of intermediates to N2. The transformation of intermediates to N2 was enhanced at elevated temperatures, which allows for the lowest emission of precursors (NH3 and HCN) at 1273 K, with a higher ratio of Ca2Fe2O5 in char.
研究领域:
环境科学
·
化学工程
✓ 已验证
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2021
·
IF 7.963
Ji Liu,Wei Zhao,Shuang-wei Yang,Bin Hu,Ming-xin Xu,Shan-Wei Ma,Qiang Lu
Incineration of food waste leads to the release of NO x pollutants, whereas the formation mechanism of the NO x precursors (HCN, NH 3 , and HNCO) during the initial pyrolysis process is far from well-studied, limiting the source control on NO x release. In this work, 2,5-diketopiperazine (DKP) was selected as the N-containing model compound to study the formation mechanism of NO x precursors in food waste pyrolysis, by combining experiments and density functional theory (DFT) calculations. The C1-N2 bond broken via the N2-to-N5 H-transfer possesses the lowest energy barrier, together with the largest reaction rate constants in the range of 400–800 °C. NH 3 can be easily generated with low energy barriers and high rate constants at low temperatures (below 630 °C). Whereas, the rate constants of the pathways for HCN formation will exceed those for NH 3 generation in the range of 630–740 °C. In addition, the DKP pyrolysis can also lead to the formation of HNCO with a very low energy barrier, and it can convert into HCN and NH 3 through further hydrogenation and decomposition. These calculation results are exactly consistent with the experimental results that NH 3 was the main precursor in the range of 400–600 °C, and the yield of HCN exceeded that of NH 3 when the temperature was over 600 °C. Our current work on the formation mechanism of NO x precursors during the pyrolysis of DKP can provide theoretical guidance for the development of NO x control technology in the pyrolysis/combustion process of organic waste.
研究领域:
环境科学
·
化学工程
·
能源科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Jiaqi Li,Mingfei Wang,Jiamin Qi,Xueqian Wang,Langlang Wang,Fei Wang,Kai Li,Yixing Ma,Ping Ning
Hydrogen cyanide (HCN), a common toxic and hazardous air pollutant in industrial exhaust, catalytic hydrolysis of HCN has been the focus of air pollution control research. In this study, a catalyst material (La-TiO 2 ) with high catalytic hydrolysis activity for HCN was obtained by loading La 2 O 3 on the TiO 2 surface, which could realize the complete conversion of HCN at 150 °C with high selectivity of NH 3 and CO 2 . The relevant characterization confirms that La 2 O 3 can be uniformly distributed on the TiO 2 , which can adjust the acid-base structure of the catalyst surface and induce the generation of multi-hydroxyl structures in TiO 2 . On this basis, the combination of in-situ technique and density functional theory (DFT) calculations confirmed that the loading of La 2 O 3 prompted the La-TiO 2 catalyst to activate H 2 O to generate surface hydroxyl groups (-OH), which further enriched the hydroxyl groups on TiO 2 and substantially improved the hydrolysis activity and NH 3 selectivity of the catalyst. And the study confirms that the hydroxyl-rich environment easy combine with the reaction intermediate (formic acid) to generate CO 2 and H 2 O, which accelerated the reaction rate, thus improving the conversion efficiency of HCN and lowering the catalytic conversion temperature. In addition, O 2 can continuously consume the remaining hydrogen atoms after the dissociation of H 2 O to generate hydroxyl groups again, thus effective enhancing catalyst stability. This study provides new theoretical support for the catalytic hydrolysis of HCN and new insights and ideas for the design and development of catalysts for the catalytic hydrolysis of HCN.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Wanting Liu,Haibo Lin,Jianqiang Wang,Qiu Han,Fu Liu
Polytetrafluoroethylene (PTFE) hollow fibers are considered as robust membranes for wastewater treatment due to its comprehensive chemical, thermal and mechanical stability. However, the intrinsic strong hydrophobicity impeded its application because of severe organic matter fouling. Therefore, hydrophilic PTFE hollow fiber membrane especially with robust resistance to chemical washing is highly desirable. Herein, we feasibly enhance the chemical washing resistance of hydrophilic PTFE hollow fiber membrane via the interface impregnation and crosslinking of poly (vinylpyrrolidone-vinyltriethoxysilane) (P (VP-VTES)). The hydrophilic crosslinking network (HCN) endowed PTFE membrane with better resistance to BSA, HA and soybean oil fouling compared to ethanol pre-wetted PTFE membrane. More importantly, the HCN modified membrane maintains its hydrophilic and chemical stability after strong acidic (pH = 2), alkaline (pH = 12) and oxidization artificial accelerated cleaning (2000 ppm NaClO) for 2 weeks. Overall, the facile preparation and excellent performance of robust hydrophilic PTFE membrane highlights its great potential in treating highly contaminated wastewater.
研究领域:
材料科学
·
环境工程
·
膜技术
✓ 已验证
DOI
高影响因子
Nature Communications
·
2024
·Vol. 15
·期 1
·1-12
·
IF 14.7
Kang Wei-Nan,Pan Yang,Liao Lan-Lan,Wu Yi-Kuan,Zhang Xiao-Qing,Jin Lin,Fu Kai-Yun,Guo Wen-Chao,Li Guo-Qing
Larvae and adults of the Colorado potato beetle ( Leptinotarsa decemlineata ), a major pest of potato crops, display conspicuous coloration to advertise their toxicity to predators. However, the identity of the toxic compounds remains unclear. Here, we show that larvae and adults release toxic hydrogen cyanide (HCN) from the degradation of mandelonitrile and other cyano-compounds, which are produced by commensal bacteria. We isolate the bacterium Proteus vulgaris Ld01 from the insect’s gut, and show that it produces HCN and a mandelonitrile-producing cyanoglucoside, amygdalin. Knockout of a gene ( hcnB ) encoding putative hydrogen cyanide synthase impairs HCN production in P. vulgaris Ld01. Antibiotic treatment of larvae, to eliminate their commensal bacteria, leads to a substantial reduction of HCN emission in larvae and adults. HCN release by bacteria-deprived beetles can be restored by addition of mandelonitrile or by re-infection with P. vulgari s Ld01 (but not with its ∆ hcnB1 or ∆ hcnB2 mutants). Finally, we use dual-choice experiments to show that domestic chicks prefer to eat bacteria-deprived larvae over control larvae, larvae re-colonized with P. vulgaris Ld01, or mandelonitrile-injected larvae. Our work highlights the role of the beetle’s intestinal bacteria in the production of the cyanoglucoside amygdalin and its derived metabolites, including mandelonitrile and HCN, which protect the insect from predation.
研究领域:
昆虫学
·
微生物学
·
化学生态学
·
昆虫毒理学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2019
·Vol. 11
·期 1
·181
·
IF 3.164
Peijian Sun,Song Yang,Xuehui Sun,Yipeng Wang,Lining Pan,Hongbo Wang,Xiaoyu Wang,Jizhao Guo,Cong Nie
To selectively reduce the yield of hydrogen cyanide (HCN) in the cigarette smoke, functional porous carboxymethyl cellulose/cellulose acetate (CMC/CA) composite microspheres were prepared via the double emulsion-solvent evaporation method. Cupric ions, which have a high complexing ability toward HCN, were introduced to the CMC/CA composite microspheres during the fabrication process via an in situ ion cross-link method. The microspheres were characterized using nitrogen adsorption, mercury intrusion porosimetry, and scanning electron microscopy (SEM). The microspheres have a predominantly macroporous structure indicating weak physisorption properties, but sufficient functional cupric ion groups to selectively adsorb HCN. With these CMC/CA microspheres as filter additives, the smoke yield of HCN could be reduced up to 50%, indicating the great potential of these microspheres as absorbents for removing HCN from cigarette smoke.Keywords:porous microspheres;carboxymethyl cellulose;cellulose acetate;cupric ions;chemisorption;hydrogen cyanide;smoke yield
研究领域:
材料科学
·
烟草研究
·
环境健康
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）