Control of burning rate pressure sensitivity for solid propellants by changing the interfacial contact of Al/HMX/AP with precisely located graphene-based energetic catalysts
The control of burning rate pressure sensitivity is essential for stable and reliable combustion of solid propellants. It has been proved that the combustion behavior of propellants can be effectively tuned by interfacial control of Al/oxidizers. In this work, core-shell Al-based composites, using oxidizers such as ammonium perchlorate (AP) and cyclotetramethylene tetranitramine (HMX) as the shell layer, have been prepared with a well-controlled location of graphene-based carbohydrazide complexes (GO-CHZ-M, M = Co 2+ or Ni 2+ ) as the catalysts. The catalysts can be located inside HMX or embedded on the surface of AP particles. The decomposition of AP and HMX could be greatly promoted with a trace amount of catalyst. Under the synergistic effects of Al/oxidizer interfacial control and GO-CHZ-M, the ignition delay time is shortened by >48 % with increased in flame radiation. More importantly, the burning rate ( r ) and pressure exponent ( n ) of the solid propellants are effectively regulated in a wide range. In particular, the use of Al@HMX/Co results in a lowered n of 0.29 within 1∼20 MPa compared to 0.79 for the blank reference sample. The agglomeration of Al particles during combustion was also inhibited due to the micro-explosion effect of Al@HMX composites. Novelty and Significance statement The innovative approaches of integrating Al/HMX/AP composites and precise catalysis of graphene-based energetic catalysts in solid propellants have successfully achieved, regarding the modulation of the burning rates and pressure sensitivity. Moreover, the effect of catalyst location on the ignition delay and burning rates has also been studied thoroughly and clarified. This paper provides new insight into the regulation of combustion performance of solid propellants, with improved reaction efficiency and maintained energy density.
危险品化学品经营许可证（带存储）