JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Ning Shao,Juan Li,Shenglei Che,Jingwu Zheng,Liang Qiao,Yao Ying,Jing Yu,Wangchang Li
The L -band and S-band electromagnetic waves are widely utilized in radar and satellite communications. This paper reports the successful synthesis of 85.8% content Ba 3 Co 2 Fe 24 O 41 (Co 2 Z) at a relatively low temperature of 1150 °C using the solid-phase method with BaFe 12 O 19 (BaM) and Ba 2 Co 2 Fe 12 O 22 (Co 2 Y) as precursors. The Co 2 Z samples were confirmed to have been successfully synthesized using X-ray diffraction (XRD) and thermogravimetry/differential scanning calorimetry (TG-DSC) spectra. Scanning electron microscopy (SEM) images revealed that the sintered samples exhibited large grains (>10 µm). Vibrating-sample magnetometry (VSM) data indicated that the synthesized Co 2 Z samples possessed distinct soft magnetic properties . X-ray photoelectron spectroscopy (XPS) results showed that the Fe 3+ content decreased with the increase in synthesis temperature. The samples synthesized at 1110 °C − 1280 °C had a permeability of 10–20, a cut-off frequency of approximately 1 GHz, and a dielectric constant of 10–30. When the thickness of the sample synthesized at 1150 °C was 3.9 mm, the frequency range of the reflection loss (RL)< −10 dB was 2.55 GHz (0.98–3.53 GHz), with 1.77 GHz as the center frequency, and RLmin was − 57.8 dB. This observation indicates that the effective absorption bandwidth of the samples covers the entire L and S bands, which significantly satisfies practical applications within the military and civilian sectors.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Yan Sun,Aowen Chen,Jingdao Yang,Kun Zhang,Sikai Wang,Xuerong Xu,Luyue Niu,Yue Jing,Ci Wang,Jing Ren,Jianzhong Zhang
Expanding gain bandwidth into the L-band for erbium-doped fiber amplifiers (EDFAs) is a crucial strategy to overcome limitations in prevalent C-band focused commercial silica-based EDFAs, significantly boosting optical network transmission capacity. Herein, we synthesized Er 3+ -doped broadband near-infrared emission tellurite glasses utilizing the melt quenching process, systematically exploring the impact of ZnCl 2 on the glass structure and optical properties. The 82TeO 2 –3Nb 2 O 5 –15ZnCl 2 –3Er 2 O 3 (TNZ15) glass emerged as a standout candidate for broadband amplifiers around wavelength at 1.55 μm. With escalating ZnCl 2 concentration, a discernible red shift in the emission peak wave lines was observed, accompanied by an expansion of the full width at half maximum (FWHM) from 98 nm to 106 nm. Noteworthy characteristics of all samples included exceptional thermal stability and elevated near-infrared (NIR) transmittance. Application of the Judd-Ofelt (J-O) theory facilitated the calculation of J-O parameter intensity, providing deeper insights into the optical behavior of the materials. Finally, the evaluation of TNZ15 planar optical waveguides, employing the vertical top pumping mode of two 980 nm LEDs, encompassed both the C-band (1530–1565 nm) and the L-band (1565–1625 nm). The results underscore the potential of TNZ15 glass as a promising gain material for broadband optical amplifiers and lasers, offering valuable insights into the development of next-generation optical amplification technologies.
研究领域:
光学材料
·
光通信
·
物理学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·Vol. 51
·期 26
·47599-47610
·
IF 5.6
Weijie Zhu,Weichao Wang
The rapid expansion of data-intensive technologies such as 5G, AI, and cloud computing is pushing optical communication systems to their limits, necessitating the development of advanced materials to extend bandwidth into the L- and U-bands. Fluoro-sulfo-phosphate (FSP) glasses, owing to their multi-anionic compositions and tunable network structures, offer a promising platform for next-generation broadband fiber amplifiers. In this work, a mixed-cation approach employing K + and Ba 2+ is employed to manipulate the local structural environment and enhance glass-forming ability, lifetime (8.7–9.22 ms for Er-doped, ∼10 ms for Er 3 + /Yb 3+ co-doped), emission cross-section (0.59-0.70 × 10 − 20 cm 2 ), energy transfer efficiency (∼85 %), and thermal quenching resistance. Despite their similar sizes and electronegativities, K + and Ba 2+ exhibit contrasting field strengths and polarizabilities, enabling a controlled balance between network connectivity and local disorder. Thermodynamic modeling and experimental results confirm that the introduction of mixed cations significantly broadens the glass-forming region. The addition of AlF 3 further strengthens the network, allowing for the preparation of stable K/Ba-FSP glasses with improved mechanical, thermal, and chemical properties. Spectroscopic analysis reveals a substantial enhancement in L-band emission efficiency and gain characteristics, with performance improvements ranging from 30 % to 150 % over conventional glass hosts. These findings position K/Ba-FSP glasses as a robust and high-performance candidate material system for broadband rare-earth-doped fiber amplifiers and lasers.
研究领域:
材料科学
·
光学工程
·
无机非金属材料
·
光通信
·
激光技术
✓ 已验证
产品关联
DOI
高影响因子
Journal of Physical Chemistry Letters
·
2025
·
IF 4.6
Jiaxing Lv,Ying Jiang,Guozhong Lu,Xiaobing Lou,Bingwen Hu
In traditional operations of all-solid-state lithium metal batteries (ASSLMBs), a small thin lithium metal circular disk is employed as a lithium metal anode (LMA). However, ASSLMBs with a circular-disk LMA often fail in <150 cycles with low capacity retention. In this work, we developed a new ring-shaped LMA to improve cyclability. Full cells consisting of a ring-shaped LMA, a LiCoO2 cathode, and a Li6PS5Cl electrolyte maintain good capacity retention of 83.65% at 0.3C after 300 cycles. Moreover, in situ L-band electron paramagnetic resonance imaging (EPRI) showed that fewer Li dendrites are formed on a ring-shaped LMA. This work highlights the importance of the design of the shape of the LMA to mitigate the growth of lithium dendrites and shows that L-band EPRI is a useful technique for ASSLMBs.
研究领域:
材料科学
·
电化学
·
储能技术
·
电池技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子