Methanol Steam Reforming over La1-xSrxCeO3-δ Catalysts for Hydrogen Production: Optimization of Operating Parameters
In this study, a series of A-site strontium-doped La1-xSrxCeO3-δ(x = 0.2, 0.4, 0.6, 0.8) perovskite catalysts were synthesized via the ethylenediaminetetraacetic acid (EDTA) sol-gel method for hydrogen production by methanol steam reforming. The fresh and the reduced catalysts are characterized by scanning X-ray (XRD), energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) techniques. Results showed that La0.6Sr0.4CeO3-δexhibited the best performance among the La1-xSrxCeO3-δcatalysts. The operating parameters were optimized to study the catalytic performance of La0.6Sr0.4CeO3-δ, including catalytic temperature, water–methanol ratio (W/M) and liquid hourly space velocity (LHSV). However, the excessive strontium content led to a decrease in hydrogen production amount per unit time, and the high W/M promoted the reverse water–gas shift reaction (RWGS), which resulted in a decrease in CO selectivity and an increase in CO2selectivity. In addition, the optimal reaction parameters are as follows: reforming temperature of 700 °C; W/M of 3:1; LHSV of 20 h−1. Furthermore, the methanol conversion rate of La0.6Sr0.4CeO3-δcan reach approximately 82%, the hydrogen production can reach approximately 3.26 × 10−3mol/g(cat)/min under the optimum reaction conditions. Furthermore, La0.6Sr0.4CeO3-δexhibits high hydrogen selectivity (85%), which is a promising catalyst for MSR application.
危险品化学品经营许可证（带存储）