ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Xin Jiang,Junwei Zhou,Xinke Zhong,Zhaopeng Hu,Rongyan Hu,Yihu Song,Qiang Zheng
Electromagnetic interference (EMI) shielding materials with stretchability are important for developing wearable and flexible appliances. Herein, lithium bis(trifloromethanesulfonyl)imide (Li-TFSI)-doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and carboxylated styrene-butadiene rubber (XSB) latex are used to prepare stretchable EMI shielding composite films of 0.2 mm in thickness. In these films, the doped PEDOT:PSS nanoparticles form tenuous conductive pathways between the hexagonally packed latex particles, resulting in higher EMI shielding efficiency (EMI SE) compared with the films containing traditional dopant ethylene glycol. For the purpose of stretchable EMI shielding, the films containing 6 wt % PEDOT:PSS and 6 wt % Li-TFSI demonstrate EMI SE of 50 and 30 dB (12.4 GHz) at 0 and 100% strains, respectively, being the highest values among the reported shielding composites except for those using liquid metal as the filler. The investigation also provides a simple and environmentally friendly preparation method being highlighted for the development of lightweight stretchable EMI shielding materials for applications in flexible electronics in the near future.
研究领域:
材料科学
·
电子工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xin Jiang,Zhaopeng Hu,Shichao Xu,Bin Hu,Benteng Liu,Qiao Li,Yihu Song,Qiang Zheng
Stretchable electromagnetic shields have garnered significant attention in the burgeoning field of flexible devices, while traditional strategies developed to maintain adequate electromagnetic shielding performance under large strains are more challenging at low temperatures. Herein, elastic electromagnetic shielding films with segregated conductive network were produced by an extremely simple method of evaporating carboxylated nitrile butadiene rubber latex containing lithium bis(trifloromethanesulfonyl)imide doped poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate). The films of 0.2 mm in thickness are highly stretchable at −20 °C and exhibit an electromagnetic interference shielding efficiency of more than 30 dB at 100 % strain and −10 °C. These properties underscore the potential of the films as effective stretchable EMI shields in low-temperature conditions. Experiments demonstrating the films' ability to block Bluetooth signals from ESP32 chip microcontrollers and electromagnetic waves from Tesla coils further confirm their usefulness, highlighting the practicality of protecting flexible devices in cold environments.
研究领域:
材料科学
·
电子工程
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL PHYSICS
·
2023
·Vol. 36
·期 2
·231-231
·
IF 1
Liu Xu-hao,Liu Yang-yang,Zhu Rong-zhi,Liu Lu-jie,Xu Chen-xin,Cao Hui
Metal-halide perovskite solar cells (PSCs) have attracted considerable attention during the past decade. However, due to the existence of non-radiative recombination losses, the best power conversion efficiency (PCE) is still lower than the theoretical limit defined by Shockley-Queser theory. In this work, we investigate 1,2,3-oxathiazin-4(3h)-one, 6-methyl-2,2-dioxide (acesulfame potassium, abbreviated as AK) as a additional dopant for the 2,2′,7,7′-tetrakis( N , N -di-p-methoxyphenyl-amine)-9,9′-spirobifluorene (Spiro-OMeTAD) and fabricate PSCs in the air. It is found that 12 mol% fraction of AK relative to lithium bis((trifluoromethyl)sulfonyl)-amide (Li-TFSI) reduces the non-radiative recombination from 86.05% to 69.23%, resulting in an average 0.08 V of V oc enhancement. The champion solar cell gives a perovskite solar cells up to 21.9% and over 84% retention of the initial value during 720 h aging in dry air with 20%–30% humidity.
研究领域:
材料科学
·
可再生能源
·
光伏技术
✓ 已验证
DOI
高影响因子
Energy Advances
·
2022
·Vol. 1
·期 12
·1028-1034
·
IF 0
Lei He,Jian-Hua Cao,Ya-Kun Wang,Da-Yong Wu
Increasing the proportion of inorganic electrolytes in organic–inorganic composite electrolytes can significantly improve the ionic conductivity of composite electrolytes. However, this method is confronted with some problems, such as the uneven dispersion of inorganic electrolytes and the aggregation of nanoparticles, which results in a worse performance of the electrolytes’ interface. In this study, we had the dopamine hydrochloride molecules self-polymerized on the surface of inorganic ionic conductor lithium titanium aluminum phosphate (LATP) particles to obtain PDA-coated LATP nanoparticles. Then, the coated LATP particles were composited with PEO at a ratio of 80 : 20, with the LATP's evenly dispersed in the PEO, and no aggregation happened. On adding a small amount of electrolyte (5 μL cm−2, 1 M Li TFSI), the ionic conductivity of the electrospun PI-loaded PEO0.2–PDA@LATP0.8 flexible composite solid electrolyte reached 2.07 × 10−4 at 30 °C and 2.05 × 10−3 S cm−1 at 80 °C. NCM811‖Li batteries assembled with this electrolyte had an initial discharge capacity of 178.0 mA h g−1 at 30 °C, and still remained at 172.1 mA h g−1 (96.7%) after 200 cycles. The research shows that there are three main conduction pathways of Li+ in this electrolyte: through the segments of the polymer chains, through the interface between the polymer and inorganic ionic conductor, and through the passage composed of a continuous inorganic ionic conductor. Further results show that the coating of LATP by PDA does not block the transmission of Li+ both inside the crystal and at the crystal interface of LATP.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
DOI
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Jianmei Jiang,Yaoming Xiao,Wenjing Yang,Chao Wen,Biye Liu,Lidan Wang,Yunpeng Xu,Xue Zhang,Qixin Zhuang,Jinguo Lin,Zisheng Su,Jeng-Yu Lin
Although the efficiency of perovskite solar cells (PSCs) keeps breaking new records, their stability and cost are still limited by using the conventional hole transport material of 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene (Spiro-OMeTAD). Herein, we use 3,4-ethylenedioxythiophene (EDOT) as a solubilizer to enhance the dissolution of lithium bis(trifluoromethane)sulfonylimide (Li-TFSI) and reduce the 4-tert-bultypyridine (TBP) dosage. Then, EDOT undergoes in situ oxidative polymerization to generate PEDOT by an oxidizing agent of iodine (I2). Moreover, I2 can also accelerate the oxidation of Spiro-OMeTAD. Therefore, the generated PEDOT can synergistically enhance hole transport capability with the oxidized Spiro-OMeTAD, and the generated I– ions can compensate for the I vacancies and inhibit the migration of I– in the perovskite film, resulting in an enhanced stability and efficiency of PSCs. A PSC based on the composite hole transport system achieves a power conversion efficiency (PCE) of 24.79%. Moreover, the PSC retains 92% of its initial PCE for over 2000 h under ambient conditions of 25 °C and 35% relative humidity. Furthermore, the quantities of Spiro-OMeTAD and TBP have, respectively, decreased by 24.9 and 37.5% in the composite hole transport system, thereby lowering the production cost of the PSC and facilitating its industrialization development.
研究领域:
材料科学
·
光伏技术
·
高分子化学
·
纳米技术
·
能源技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）