CATALYSIS COMMUNICATIONS
·
2017
·
IF 3.33
Zhiming Chen,Bo Xu,Xiaomei Wang,Li Zhang,Xiaoqing Yang,Cuncheng Li
Separation and recycling of noble metal nanoparticles after catalytic reaction is critical to promote its application efficiency and cut down the cost. This work presents a facile synthesis strategy for the fabrication of sandwich-like MIL-100(Fe)@Pt@MIL-100(Fe) (denoted as S-Pt) nanoparticles with high stability and improved catalytic activity for hydrogenation of nitrophenol. MIL-100(Fe) acts as both carrier to make the catalyst easily separated and shield to protect the tiny Pt nanoparticles from leaching or aggregation during reaction. Moreover, mass transfer effect of the porous MIL-100(Fe) with its pore structure serving as nano-reactor is also benefit for promoting the catalytic efficiency.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Xingxing Huang,Yingzhang Shi,Cheng Liu,Zhiwen Wang,Jinhong Bi,Jimmy C. Yu,Ling Wu
A series of Cu 2 O clusters/MIL-100(Fe) heterojunctions with different Cu 2 O mass ratios were constructed as the photocatalysts for N 2 fixation. An optimal nitrogen fixation performance of 51.22 μmol·g −1 ·h −1 is achieved when the mass fraction of Cu 2 O is 20 %. Isotope analysis experiments confirmed that the nitrogen source is N 2 . Possible intermediate signals during photocatalytic reactions were detected by in situ DRIFTS. XPS results further confirm the formation of Cu 2 O/MIL-100(Fe) heterojunctions, and that the existence of Cu–O surface interactions is the key to efficient electron transfer. It is revealed that the improvement of the catalytic performance is derived from the formation of heterojunction which regulates the energy band structure as well as promotes the separation of photogenerated electron-hole pairs. This study proposes a possible mechanism of photocatalytic nitrogen fixation and emphasizes the role of surface interaction and electron transfer in type-II heterojunction in improving nitrogen fixation performance.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2025
·
IF 6.7
Chengzhuo Yu,Jin Xu,Li Xiong,Yarui Wang,Silong Wang,Fanglan Geng,Zesen Shang,Huasheng Wu,Lixia Zhao,Yawei Wang
Luminol-based chemiluminescence (CL) systems, as a powerful tool for bioanalysis, are limited owing to their weak CL intensity and self-decomposition of the classic oxidant H2O2. Herein, we introduced a new luminol CL enhancer, the natural light-driven photocatalyst MIL-100(Fe)/TiO2, for the selective determination of dopamine (DA). By employing MIL-100(Fe)/TiO2 for the first time as an efficient enhancer, the MIL-100(Fe)/TiO2-luminol CL intensity was 100 times higher than that of the classical H2O2-luminol system. The CL spectrum, UV–vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance spectroscopy were utilized to investigate the possible CL mechanism of the MIL-100(Fe)/TiO2-luminol system. All of the results indicated that MIL-100(Fe)/TiO2 can generate reactive oxygen species under mild natural light, which could react rapidly with the luminol anion radical and result in direct CL emission. The sensitive plate for DA was developed based on its inhibiting effect on CL intensity, and the linear range between CL intensity and DA concentration was 100 nM–1000 μM with a detection limit of 16.7 μM (S/N = 3). This study successfully achieved a stable reactant that can directly trigger the CL of luminol without the need for additional oxidizing agents under mild natural light and offers new possibilities for photoinduced amplification technology.
研究领域:
分析化学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS COMMUNICATIONS
·
2017
·
IF 3.33
Bo Xu,Zhiming Chen,Bing Han,Cuncheng Li
This work presents MIL-100(Fe) nanoparticles synthesized using glycol with uniform size and morphology. This is the first report of nanoscale MOFs material synthesized using glycol. The MIL-100(Fe) particles have been characterized by SEM, TEM, XRD and the results indicate that the MOFs particles show monodispersed nanospherical morphology. Photocatalytic study reveals that the MIL-100(Fe) nanospheres exhibit good oxidation ability of benzene to phenol under visible light irradiation with high selectivity.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2022
·
IF 5.876
Xiuying Zhu,Mengjie Li,Xiong-Fei Zhang,Jianfeng Yao
Iron-based metal-organic framework (MIL-100) with intrinsic high surface area and low cost is extremely attractive in the field of organic pollutant remediation. Herein, delignified balsa wood is utilized as substrate/support for the in situ growth and dispersion of MIL-100 particles. Results demonstrate that the MIL-100 particles adhere tightly to the support and a hierarchal architecture is constructed. The MIL-100@Wood composite can be used as adsorbent and filter for the alleviation of organic contamination. With 25.4 wt% of MIL-100 loading, the MIL-100 decorated delignified wood (MD-Wood) exhibits a tetracycline (TC) adsorption capacity of 109.9 mg/g. The composite MD-Wood can be easily fabricated into an all-in-one filter and this filter presents an effective treatable volume of 1100 mL of TC solution (20 mg/L). The MD-Wood is further deposited with Ag particles and the Ag@MD-Wood can be directly applied for the flow catalytic reduction of 4-nitrophenol. Moreover, the composite woods are facile to regenerate and possess superior reusability and stability.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·Vol. 54
·期 8
·3467-3477
·
IF 3.3
Wenhui Hu,Zhongxin Song,Lingna Sun,Lei Zhang,Qianling Zhang,Xiangzhong Ren,Yongliang Li
Efficient separation of photogenerated charge carriers is essential for maximizing the photocatalytic efficiency of semiconductor materials in oxygen evolution reactions (OER). This study presents a novel trimetallic photocatalyst, MIL-100(Fe)/TiO2/CoOx, synthesized through a facile microwave-assisted hydrothermal method followed by atomic layer deposition (ALD). The porous MIL-100(Fe) serves as a support for the sequential deposition of TiO2 and CoOx layers via ALD, which enhances electron–hole pair separation and minimizes their recombination. Characterization using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) confirms the uniform deposition of TiO2 and CoOx layers on the MIL-100(Fe) surface. The optimized photocatalyst, processed with 20 deposition cycles of Co, exhibits exceptional photocatalytic OER performance, with an oxygen evolution rate of 558.3 μmol g−1 h−1. This enhancement in activity is attributed to the synergistic interaction between the spatially separated TiO2 and CoOx cocatalysts, which facilitates efficient charge transfer and increases the number of active sites. These findings highlight the potential of ALD-fabricated heterostructures in the development of advanced photocatalysts for sustainable energy production.
研究领域:
材料科学
·
能源化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Shuyu Chen,Zhengkai Wu,Xueying Cheng,Lu Chen,Yunning Chen,Yingna Guo,Changhua Wang,Qingkun Shang
In this work, we used a simple hydrothermal method to in-situ grow Zn 3 In 2 S 6 on MIL-100(Fe) octahedra, and obtained a MIL-100(Fe)@Zn 3 In 2 S 6 Z-scheme heterojunction photocatalyst. We systematically studied its performance in degrading phenol and p-nitrophenol (PNP) under visible light. MIL-ZIS 6 -2 can remove 89.1 % of phenol within 120 min and nearly 100 % of PNP within 60 min. Its photocatalytic activity to the degradation of phenol is 30.7 times and 1.7 times higher than that of MIL-100(Fe) and Zn 3 In 2 S 6 , respectively. And the photocatalytic activity to degrade PNP is 18.2 times and 1.4 times higher than MIL-100(Fe) and Zn 3 In 2 S 6 . Further research was conducted on its band structure and photocatalytic response mechanism through photoelectric performance, ultraviolet photo-electron spectroscopy, and electron spin resonance spectrometer testing. The results showed that the formation of Z-scheme heterojunction not only increased the specific surface area of the composite photocatalyst, enabling it to provide more reaction sites, but also effectively suppressed the recombination of photogenerated holes and electrons, improving the redox ability of the photocatalyst. This work provides a new perspective for constructing efficient Zn 3 In 2 S 6 -based composite photocatalysts and addressing environmental issues.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL POLLUTION
·
2019
·
IF 5.714
Shuting Zhuang,Yong Liu,Jianlong Wang
The development of high-efficiency adsorbents and the exploration of their adsorption mechanisms are major challenges in environmental remediation. Herein, MIL-100 was prepared, characterized, and utilized for the adsorptive removal of diclofenac sodium (DCF) from aqueous solutions. A high monolayer adsorption capacity of 773 mg g −1 was recorded. The adsorption mechanism was proposed based on different contributions of two types of pore structure of MIL-100 to the adsorption of DCF from aqueous solutions according to the experimental results and theoretical calculation. During adsorption process, DCF (5.2 × 7.4 × 10.3 Å) diffused through the free area of hexagonal pores (8.6 × 8.6 Å) into the cages of MIL-100, whilst it was adsorbed by the pentagonal pores (4.8 × 5.8 Å) preferentially. Internal mass transfer resistance, which was identified as one of the dominant rate-limiting steps by the mass transfer resistance kinetic models based on the Sips model, will be derived from the diffusion process, which was affected by the size-sieving effect of the pore structure of MIL-100. The successful diffusion of DCF into the interior of MIL-100 and the stable configuration between MIL-100 and DCF accounted for the high adsorption capacity. The capture of DCF into MIL-100 also resulted in the pore size distribution variation of adsorbent, which provided vital experimental evidence for the proposed mechanism. This study may offer deeper insights into other pollutants removal by metal-organic frameworks type adsorbents.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2023
·
IF 5.2
Ning Gu,Yueyang Xu,Yan Yin,Xuzhao Gao,Yongping Zeng
SO x released from the combustion of sulfur-containing compounds in fuels pollute the environment and have a serious impact on human health. Adsorption desulfurization is an effective and environmentally friendly technique for removing sulfur-containing compounds from fuels. Metal-organic frameworks (MOFs) have high specific surface areas and can be easily modified and functionalized, making them excellent candidates for adsorption desulfurization in fuels. In this work, the precursor MIL-100(Fe)-SA was prepared using the hydrothermal method , and the adsorbent Ni@MIL-100(Fe)-SA was obtained by doping Ni 2+ into the resulting MIL-100(Fe)-SA using the impregnation method. FT-IR, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption isotherms were used to analyze the samples. The results indicated that Ni 2+ was successfully loaded onto MIL-100(Fe)-SA, and the MOF's structure remained stable. The adsorption performance of benzothiophene and thiophene was evaluated through batch adsorption experiments. The adsorption capacities of Ni@MIL-100(Fe)-SA for thiophene and benzothiophene were 23.68 mg S/g and 49.58 mg S/g, respectively. These observations could be ascribed to the π-complexation interactions between Ni 2+ of the framework and thiophenic compounds. The regeneration experiments demonstrated that the spent 11Ni@MIL-100(Fe)-SA-1.5 reach 86% of the adsorption capacity of fresh adsorbent after four cycles. Additionally, the regenerated adsorbent maintained good crystallinity after recycling.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 5
·2943-2952
·
IF 3.108
Jia Yang,Xiaojun Niu,Shaorong An,Weiyi Chen,Jie Wang,Wei Liu
A novel Bi2MoO6–MIL-100(Fe) heterostructure photocatalyst was synthesized by a facile solvothermal method for the first time, and characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance spectra, transmission electron microscopy, and photoluminescence spectra. The as-prepared Bi2MoO6–MIL-100(Fe) composites exhibited excellent photocatalytic activity and stability towards the degradation of Rhodamine B (RhB) under visible light irradiation. The introduction of MIL-100(Fe) into semiconductor Bi2MoO6 improved the photocatalytic performance remarkably, and the optimal composite with 9% MIL-100(Fe) content showed the highest photocatalytic activity. According to the active radical trapping experiments, the h+ and ˙O2− radicals were the two main active species in the photocatalytic reaction. The enhanced photocatalytic performance is mainly attributed to the formation of the Bi2MoO6–MIL-100(Fe) heterostructure, which is beneficial to the transfer and separation of photo-generated electron–hole pairs. The possible mechanism of the enhanced photocatalytic performance of the Bi2MoO6–MIL-100(Fe) composites was discussed.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2017
·
IF 3.615
Bo Xu,Xuejiao Li,Zhiming Chen,Tao Zhang,Cuncheng Li
Pd@MIL-100(Fe) composite nanoparticles were synthesized and characterized by high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction analysis, nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopic (XPS) analysis, energy-dispersive X-ray spectroscopy (EDS) and element mapping. Due to the local restriction or confinement effect of the unique pore/surface structure within the MIL-100(Fe) nanospheres , small Pd nanoparticle (4–6 nm) were obtained with high stability without using any surfactant as stabilizer . The as-synthesized Pd@MIL-100(Fe) composite nanoparticles were then employed for the catalytic reduction of 2/3/4-nitrophenol, which exhibiting high catalytic activity and recyclability attributed to the synergistic effect between Pd nanoparticles and MIL-100(Fe) nanospheres.
研究领域:
材料科学
·
环境化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Shiyong Wei,Aijia Cao,Siyuan Huang,Yao Shen,Ting Lei,Songmei Luo,Mingjun Cai,Wenjun Xiang,Anying Chen,Rui Wang
Although MIL-100(Fe) was regarded as an ideal material for the environmental remediation, it could not be applied in practical because of the potential eco-environmental risk and cost. In this work, a novelty strategy of liquidizing crystal MIL-100(Fe) was posted for the first time through inhibiting the crystallization process and forming physical MIL-100(Fe) gel. Due to this MIL-100(Fe) sol–gel, MIL-100(Fe) could easy cover on the surface of silica powder (SiO 2 ) through simple soaking operation. MIL-100(Fe) covering on SiO 2 (MIL-100(Fe)@SiO 2 ) could be quickly separated from wastewater spontaneously owing to the carrier of SiO 2 , even in a tank of 2.0 m, which made it possible for purifying wastewater in practical. MIL-100(Fe)@SiO 2 could remove phosphate with a removing ratio of closing 100 % at an initial concentration of 10 mg/L, while more than 95 % towards methyl orange (MO). The removing ratio of MO by MIL-100(Fe)@SiO 2 did not obviously decrease when the concentration of MO increased to 100 mg/L. And the adsorption performance of phosphate did not affect by pH among 3.0–9.0. The adsorption amount exceeded 50 % of maximum adsorption capacity for phosphate within 30 min, while 90 % for MO. Monodentate mononuclear coordination could explain the adsorption of phosphate by MIL-100(Fe)@SiO 2 . The N atom in MO might be acted as Lewis acid to coordinate with MIL-100(Fe)@SiO 2 . After adsorption, the P-saturated and MO-saturated MIL-100(Fe)@SiO 2 could be effectively regenerated by the dilute HCl and NaOH solution, respectively. The recovery ratio of adsorption capacity for phosphate and MO were up to 97.7 % and 71.6 %.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）