NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Yongzhao Zhang,Xuzheng Chen,Yunlei Zhou,Tao Feng,Luping Lyu,Zhenya Zhu,Yifan Liu
The efficient transformation of glucose into 5-hydroxymethylfurfural (5-HMF) is crucial for sustainable bio-refinery processes, but achieving high production efficiency remains challenging. In this study, we presented the preparation of Al-containing metal-organic frameworks (MOFs), specifically MIL-53(Al), MIL-53(Al)-NO2, and MIL-53(Al)-NH2, using different ligands as catalysts to enhance the production of 5-HMF from glucose. Comprehensive characterization provided valuable insights into the properties of the synthesized MOFs. The synthesized MOFs exhibited varied MIL-53(Al) states, morphologies, and thermal stabilities based on the different ligands employed, which in turn affected their catalytic performance. Among the Al-containing MOFs synthesized, MIL-53(Al)-NH2 demonstrated remarkable catalytic capabilities for the conversion of glucose to 5-HMF. This MOF achieved an impressive 5-HMF yield of 53% and a reaction selectivity of 54%. The catalytic efficiency was further enhanced by leveraging the synergistic effect of MIL-53(Al)-NH2 in combination with Amberlyst-36, resulting in a 5-HMF yield of 59% and a reaction selectivity of 60%.
研究领域:
化学工程
·
催化
·
材料科学
·
可持续化学
✓ 已验证
产品关联
DOI
高影响因子
Science of Advanced Materials
·
2023
·Vol. 15
·期 6
·754-760
·
IF 0.9
Chen Lin,Zhang Hang,Fouad Hassan,Akhtar M. S.,Wang Zhihong
This study presents a straightforward hydrothermal synthesis technique for modifying the crystal size and shape of MIL-53(Al) via the use of a mixed solvent solution consisting of water and DMF. Without the use of coordination inhibitors or surfactants, a sequence of nanosized MIL-53(Al)
crystals was efficiently synthesized. The lowest crystal size we were able to achieve in this work was 100 nm, but present technologies are not suited to creating nanoscale crystals of this size. Large crystallinity and yield were attained, and the samples’ very large specific surface
areas expanded the usefulness of this MOF material for gas adsorption and storage. X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, nitrogen gas adsorption/desorption, and infrared spectroscopy were all used to characterize the samples. Finally, the effect of moisture
concentration on crystal size and shape was investigated.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2024
·
IF 3.2
Wenlong Ma,Tianxu Hao,Xinya Wang,Wei Zhang,Yonggui Li,Mingxing Chen
In this paper, a high-performance composite nanofiber membrane with excellent air filtration and dye degradation properties was prepared by incorporating MIL-53(Fe) nanoparticles into the electrospinning solution. The results showed that the filtration efficiency for PM2.5 of the PP/PVDF-HFP/MIL-53(Fe) composite nanofiber membrane reached up to 99.3% with the addition of 2 wt% MIL-53(Fe). Moreover, the composite nanofiber membrane exhibited steady filtration efficiency across different parameters, including air velocity, PM2.5 concentration, and extended testing time. Furthermore, the incorporation of MIL-53(Fe) significantly enhanced the removal efficiency of the composite nanofiber membrane toward Rh B, resulting in a remarkable 91% removal rate. The polymer/MOF composite nanofiber membranes prepared by simple and cheap electrospinning technology have a wide range of practical applications in the field of environmental protection. Highlights PPM composite nanofiber membrane was prepared via electrospinning method. MIL-53(Fe) nanoparticles were introduced to PPM composite nanofiber membrane. PPM composite nanofiber membrane showed excellent removal efficiency for PM2.5. PPM composite nanofiber showed a good removal performance for RhB in solution.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CLAY MINERALS
·
2021
·Vol. 56
·期 2
·99-107
·
IF 1.478
Fengli Dai,Junhui Guo,Yufeng He,Pengfei Song,Rongmin Wang
Montmorillonite (Mnt), a clay mineral with a nanolayered structure, was combined with an Fe-based metal–organic framework (MOF; MIL-53(Fe)) using an in situ growth technique that yielded a novel eco-friendly clay-based adsorbent (MIL-53(Fe)@Mnt). The adsorbent was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and N2 gas adsorption. The MIL-53(Fe) particles grew on the surface of the nanolayered Mnt and the MIL-53(Fe) particle size became smaller. The adsorption performance of MIL-53(Fe)@Mnt was investigated by removing methylene blue (MB), and optimization experiments were carried out to study the effects of contact time, pH, initial dye concentration and adsorbent mass on the adsorption processes. The MIL-53(Fe)@Mnt exhibited excellent adsorption capacity for MB, namely 313.7 mg g−1, which was 3.02 times and 3.54 times greater than that of pure Mnt and MIL-53(Fe), respectively. Adsorption was fitted with the Langmuir isotherm model and followed a pseudo-second order kinetic model. The MIL-53(Fe)@Mnt obtained is a low-cost and eco-friendly adsorbing material and might be a candidate for removing dyes during water treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
MEASUREMENT SCIENCE and TECHNOLOGY
·
2022
·Vol. 34
·期 2
·025106
·
IF 2.398
Qianchun Zhang,Qin Zhou,Yun Wu,Yanxin Li,Fengling Tian,Shan Tang,Li Jiang
In this study, MIL-53(Al) and Sb2SnO5 were synthesized by hydrothermal and precipitation methods, respectively. The doped MIL-53(Al)/Sb2SnO5 showed excellent catalytic properties, specifically for selectivity and sensitivity for isobutanol (IBN). To assess the catalytic properties of MIL-53(Al)/Sb2SnO5, an IBN gas sensor based on cataluminescence of MIL-53(Al)/Sb2SnO5 was developed, and it demonstrated detection of IBN with high sensitivity, high specificity, fast detection, and good stability. The signal response and recovery time of IBN gas sensor were 0.5 s and 6 s, respectively, and a good linear relation was 0.050–2.5 μg ml−1 (R2 = 0.9956) with a low detection limit of 0.015 μg ml−1. Further, the IBN sensor applied in the detection of real samples had satisfactory recoveries (90.0%–108%) with relative standard deviations of 3.2%–6.7%. The developed sensor based on MIL-53(Al)/Sb2SnO5 has great prospects for the practical detection of IBN gas in the fields of environmental analysis, safety monitoring, etc.
研究领域:
材料科学
·
环境分析
·
传感技术
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2025
·
IF 3.3
Leiting Si,Jiawei Yang,Guang Liu
BiVO4 is considered as one of the important candidate materials for photoelectrochemical water splitting technology. However, the low efficiency of charge separation and poor kinetics of water oxidation limit its performance in the PEC water splitting. In this work, BiVO4/MIL-53(FeNiCo) photoanode was constructed by a facile hydrothermal deposition method, exhibiting excellent water oxidation ability under AM 1.5 G light irradiation, and achieving a photocurrent density of 3.53 mA cm-2 at 1.23 VRHE, which is about 3.2 times that of pure BiVO4. The electrochemical test results demonstrate that the decoration of MIL-53(FeNiCo) could enhance the charge transfer and accelerate the kinetics of water oxidation reaction, thus leading to the excellent PEC water splitting performance. The PEC stability is also significantly improved, indicating that MIL-53(FeNiCo) allows BiVO4 to be used for water oxidation for stable PEC water oxidation.
研究领域:
材料科学
·
能源技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF ANALYTICAL CHEMISTRY
·
2022
·
IF 1.193
Linli HOU,Li WANG,Yonghai SONG,Limin LIU
A luminescent hydroxyl-functionalized MIL-53(Al) (OH-MIL-53(Al)) was prepared by one-step solvent thermal method for multiresponsive fluorescence sensor. The OH-MIL-53(Al) exhibited uniform nanospheres with average diameter of 150±20 nm, flexible three-dimensional frameworks, and good dispersion in water. The OH-MIL-53(Al) emitted green fluorescence with a maximum wavelength of 515 nm which showed good fluorescence quenching response for sensing F − and fluorescence enhancement response for water, with good day-to-day stability. The mechanism was based on protonation/deprotonation of hydroxyl group located on OH-MIL-53(Al). Good linear relationship could be found between the luminescence intensity of 515 nm and F − concentrations in the range of 0–60 µM with a determination limit of 70 nM. At the concentrations from 0% to 100%, the fitting curve for water content was in good agreement with the linear equation, and the detection limit was 0.10%. OH-MIL-53(Al) demonstrated excellent fluorescence sensing performance, indicating that it could be used as a multiresponsive sensor to practical application.
研究领域:
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
Processes
·
2021
·Vol. 9
·期 12
·2195
·
IF 2.847
Yi Qian,Haoyan Fu,Long Li,Wenyuan Su,Jiayin Li,Yihao Zhang
Due to the widespread use of antibiotics in medical treatment, animal husbandry and aquaculture, a large number of antibiotics are discharged into the environment as metabolites or in their original state, causing pollution to water bodies, which is a serious issue. In this study, a novel nanocomposite adsorbent MIL-53/D201 was successfully prepared by hydrothermal synthesis. This approach overcomes the disadvantage of easy dissociation of MOF material in the water phase and realizes the efficient removal of antibiotic azlocillin sodium in water. The crystal morphology and basic structure of the composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy scattering spectroscopy (EDS), and specific surface area and porosity analyzer (BET). The results showed that MIL-53 was successfully synthesized in situ in D201. The results of adsorption experiments show that the maximum saturated adsorption capacity of the composite is 122.3 mg/g when the dosage of the composite is 1.0 g/L. Compared with pure MIL-53 material, the composite material exhibits greater stability and efficient adsorption performance for target pollutants at different pH values. The adsorption process accords with the quasi-second-order kinetic adsorption model and Langmuir adsorption isothermal model. After five cycles of adsorption and desorption, the removal rate of MIL-53/D201 to azlocillin sodium was still above 87%.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
International Journal of Environmental Research and Public Health
·
2023
·Vol. 20
·期 5
·4571
·
IF 4.614
Shuyan Yu,Huiying Zhang,Congju Li
In this study, MIL-53(Fe) was innovatively incorporated into carbon felt (CF) by growing in-situ using the solvothermal method. MIL-53(Fe)@carbon felt (MIL-53(Fe)@CF) was prepared and used for the degradation of rhodamine B (RhB). As a new photocatalytic membrane, MIL-53(Fe)@CF photocatalytic membrane has the characteristics of high degradation efficiency and recyclability. Influence of various parameters including MIL-53(Fe)@CF loading, light, electron trapper type, and starting pH on RhB degradation were investigated. The morphology, structure, and degradation properties of MIL-53(Fe)@CF photocatalytic membrane were characterized. Corresponding reaction mechanisms were explored. The results indicated that pH at 4.5 and 1 mmol/L H2O2, 150 mg MIL-53(Fe)@CF could photocatalytically degrade 1 mg/L RhB by 98.8% within 120 min, and the reaction rate constant (k) could reach 0.03635 min−1. The clearance rate of RhB decreased by only 2.8% after three operations. MIL-53(Fe)@CF photocatalytic membrane was found to be stable.Keywords:MIL-53(Fe)@carbon felt;photocatalytic;degradation;rhodamine B
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2024
·
IF 4.2
Qianchun Zhang,Xixi Long,Shan Tang,Li Jiang,Zhaoru Ban,Yanju Chen,Runkun Zhang
A simple, rapid, and reliable method for detecting harmful gases is urgently required in environmental security fields. In this study, a highly effective cataluminescence sensor based on SiO 2 /MIL-53(Al) composites was developed to detect trace isobutylaldehyde. The sensor was designed using isobutylaldehyde to generate an interesting cataluminescence phenomenon in SiO 2 /MIL-53(Al). Under optimized conditions, a positive linear relationship was observed between the signal intensity of the cataluminescence and isobutylaldehyde concentration. The isobutylaldehyde concentration range of 1.55–310 ppm responded well to the sensing test, with an excellent correlation coefficient of 0.9996. The minimum detectable concentration signal-to-noise ratio ( S/N = 3) was found to be 0.49 ppm. In addition, the sensor was effectively utilized for analyzing trace isobutylaldehyde; the analysis resulted in recoveries ranging from 83.4% to 105%, with relative standard deviations ( RSDs ) of 4.8% to 9.4%. Furthermore, the mechanism of cataluminescence between SiO 2 /MIL-53(Al) and isobutylaldehyde was explored using GC–MS analysis and density functional theory. We expect that this cataluminescence methodology will provide an approach for the environmental monitoring of isobutylaldehyde.
研究领域:
环境科学
·
材料科学
·
化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL LETTERS
·
2020
·
IF 1.467
Meijuan Ren,Huan Wang,Yuanyuan Liu,Qin Ma,Wenjing Jia,Mingzhu Liu,Huiju Wang,Yongchang Lu
Amino-MIL-53(Al) nanosheets were synthesized by a hydrothermal reaction and were employed as a fluorescent probe because of their high quantum yield and excellent stability. The amino-MIL-53(Al) nanosheets have a maximum fluorescence emission peak at 435 nm using an excitation wavelength of 335 nm. The fluorescent intensity of luminophor at 435 nm was linearly quenched when mercury (II) (Hg2+) was added, which occurred due to the adsorption of Hg2+ onto the luminophor surface. Under these conditions, the fluorescent signal of the system is in the “turn-off” state. Following the addition of glutathione (GSH) into the system, the quenched fluorescence intensity may be partially restored based on the reaction between glutathione and Hg2+. In this condition, the fluorescent signal of the amino-MIL-53(Al)-Hg2+ system is in the “turn-on” state. Therefore, the amino-MIL-53(Al) nanosheets were successfully used as a “turn-off-on” fluorescent sensing system to determine the concentrations of Hg2+ in Tibetan medicine and glutathione in rabbit serum. A good correlation coefficient was obtained between the quenching of the fluorescence intensity of luminophor and the concentration of Hg2+ using the optimized conditions. A linear range was acquired from 1.96 nM to 38.27 μM with a detection limit of 0.23 nM of Hg2+ based upon a signal-to-noise ratio of three. For glutathione, the linear dynamic range was from 210 nM to 15.25 μM with a detection limit equal to 8.11 nM based upon a signal-to-noise ratio of three. This developed sensor system has the advantages of high selectivity, favorable sensitivity and simple operation for the determination of Hg2+ and glutathione in real samples.
研究领域:
分析化学
·
生物化学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Pharmaceutical Analysis
·
2021
·
IF 4.769
Xiaodong Sun,Bing Niu,Qi Zhang,Qin Chen
Homochiral metal-organic frameworks (MOFs) have attracted considerable attention in many fields of research, such as chiral catalysis and chiral chromatography. However, only few homochiral MOFs can be effectively used in capillary electrochromatography (CEC) and their performances are far from adequate. In this study, we successfully synthesized achiral nanocrystalline MIL-53. A facile post-synthetic modification strategy was then implemented to functionalize the product, yielding a homochiral MOF: l -His-NH-MIL-53. This MOF was then employed as a chiral coating in open-tubular CEC mode (OT-CEC), and, as such, it exhibited high enantioselectivities for several racemic drugs. The homochiral MOF and the fabricated capillary coating were systematically characterized using transmission electron microscopy, scanning electron microscopy (with energy-dispersive X-ray spectrometry), Fourier-transform infrared spectroscopy, X-ray diffractometry, thermogravimetric analysis, circular dichroism spectroscopy, Brunauer-Emmett-Teller surface area measurements, and X-ray photoelectron spectroscopy. This study is expected to provide a new strategy for the design and establishment of MOF-based chiral OT-CEC systems.
研究领域:
分析化学
·
材料科学
·
色谱学
·
纳米技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）