POLYMER ENGINEERING AND SCIENCE
·
2024
·
IF 3.2
Wenlong Ma,Tianxu Hao,Xinya Wang,Wei Zhang,Yonggui Li,Mingxing Chen
In this paper, a high-performance composite nanofiber membrane with excellent air filtration and dye degradation properties was prepared by incorporating MIL-53(Fe) nanoparticles into the electrospinning solution. The results showed that the filtration efficiency for PM2.5 of the PP/PVDF-HFP/MIL-53(Fe) composite nanofiber membrane reached up to 99.3% with the addition of 2 wt% MIL-53(Fe). Moreover, the composite nanofiber membrane exhibited steady filtration efficiency across different parameters, including air velocity, PM2.5 concentration, and extended testing time. Furthermore, the incorporation of MIL-53(Fe) significantly enhanced the removal efficiency of the composite nanofiber membrane toward Rh B, resulting in a remarkable 91% removal rate. The polymer/MOF composite nanofiber membranes prepared by simple and cheap electrospinning technology have a wide range of practical applications in the field of environmental protection. Highlights PPM composite nanofiber membrane was prepared via electrospinning method. MIL-53(Fe) nanoparticles were introduced to PPM composite nanofiber membrane. PPM composite nanofiber membrane showed excellent removal efficiency for PM2.5. PPM composite nanofiber showed a good removal performance for RhB in solution.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CLAY MINERALS
·
2021
·Vol. 56
·期 2
·99-107
·
IF 1.478
Fengli Dai,Junhui Guo,Yufeng He,Pengfei Song,Rongmin Wang
Montmorillonite (Mnt), a clay mineral with a nanolayered structure, was combined with an Fe-based metal–organic framework (MOF; MIL-53(Fe)) using an in situ growth technique that yielded a novel eco-friendly clay-based adsorbent (MIL-53(Fe)@Mnt). The adsorbent was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and N2 gas adsorption. The MIL-53(Fe) particles grew on the surface of the nanolayered Mnt and the MIL-53(Fe) particle size became smaller. The adsorption performance of MIL-53(Fe)@Mnt was investigated by removing methylene blue (MB), and optimization experiments were carried out to study the effects of contact time, pH, initial dye concentration and adsorbent mass on the adsorption processes. The MIL-53(Fe)@Mnt exhibited excellent adsorption capacity for MB, namely 313.7 mg g−1, which was 3.02 times and 3.54 times greater than that of pure Mnt and MIL-53(Fe), respectively. Adsorption was fitted with the Langmuir isotherm model and followed a pseudo-second order kinetic model. The MIL-53(Fe)@Mnt obtained is a low-cost and eco-friendly adsorbing material and might be a candidate for removing dyes during water treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Environmental Research and Public Health
·
2023
·Vol. 20
·期 5
·4571
·
IF 4.614
Shuyan Yu,Huiying Zhang,Congju Li
In this study, MIL-53(Fe) was innovatively incorporated into carbon felt (CF) by growing in-situ using the solvothermal method. MIL-53(Fe)@carbon felt (MIL-53(Fe)@CF) was prepared and used for the degradation of rhodamine B (RhB). As a new photocatalytic membrane, MIL-53(Fe)@CF photocatalytic membrane has the characteristics of high degradation efficiency and recyclability. Influence of various parameters including MIL-53(Fe)@CF loading, light, electron trapper type, and starting pH on RhB degradation were investigated. The morphology, structure, and degradation properties of MIL-53(Fe)@CF photocatalytic membrane were characterized. Corresponding reaction mechanisms were explored. The results indicated that pH at 4.5 and 1 mmol/L H2O2, 150 mg MIL-53(Fe)@CF could photocatalytically degrade 1 mg/L RhB by 98.8% within 120 min, and the reaction rate constant (k) could reach 0.03635 min−1. The clearance rate of RhB decreased by only 2.8% after three operations. MIL-53(Fe)@CF photocatalytic membrane was found to be stable.Keywords:MIL-53(Fe)@carbon felt;photocatalytic;degradation;rhodamine B
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Ruobai Li,Zhiming Chen,Meixuan Cai,Jiaxing Huang,Ping Chen,Guoguang Liu,Wenying Lv
Metal-organic frameworks (MOFs) have attracted tremendous interest as photocatalysis for the destruction of organic contaminants. Herein, we synthesize a Fe-based MOF namely MIL-53(Fe), combined with Fe(III) and percarbonate, exhibits photocatalytic activity for the destruction of Sulfamethazine (SMT) under visible LED light irradiation. The morphology and physicochemical properties of the MIL-53(Fe) were determined using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectra (EDS), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy (PL). The results indicated that the photocatalytic performance of MIL-53(Fe) with unsatisfactory efficiency resulted from the rapid recombination of photogenerated electrons and holes. This may be suppressed through the introduction of an external electron acceptor (e.g., Fe(III) and percarbonate) to the catalytic process. It could be seen that the SMT degradation efficiency in the system of Vis/MIL-53(Fe)/Fe(III)/SPC attained nearly 90% within 60 min, while only 12% achieved in the system of Vis/MIL-53(Fe). The quenching experiments and EPR analysis were employed to illuminate the predominant reactive species in the system of Vis/MIL-53(Fe)/Fe(III)/SPC. It must be mentioned that the higher separation efficiency of photoinduced electron- hole pairs was achieved via the addition of Fe(III). The accelerated photocatalytic degradation of SMT could be attributed to the subsequent formation of reactive species, which were generated from the activation of SPS by Fe(II) reduced from Fe(III) in the Vis/MIL-53(Fe)/Fe(III)/SPC system. Furthermore, the mineralization of SMT was systematically investigated, as well as the effects of operating parameters (e.g., the dose of catalyst, the concentration of Fe(III), and pH). The work has expanded the possibility of MOFs as visible light responsive photocatalysts together with percarbonate for the remediation of contaminated water.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Fangxu Dai,Ying Wang,Xinran Zhou,Ruiyang Zhao,Jishu Han,Lei Wang
An efficient visible light responsive ZnIn 2 S 4 @NH 2 -MIL-53(Fe/Co 0.75 ) nanocomposite was prepared for photocatalytic hydrogen production application. Under visible light irradiation, the ZnIn 2 S 4 @NH 2 -MIL-53(Fe/Co 0.75 ) photocatalyst displayed improved photocatalytic performance and the hydrogen production rate reached to 161724.8 μmol/g in 6 h. The nanocomposite with large specific surface area and mesoporous structure increased the light absorption, improved the electrons transfer and suppressed the recombination of photogenerated electron-hole pairs, thus exhibiting efficient photocatalytic hydrogen production performance. The controllable synthesis of ZnIn 2 S 4 @NH 2 -MIL-53(Fe/Co 0.75 ) nanocomposite as a high-efficiency photocatalyst would have broad prospect for water splitting hydrogen production application.
研究领域:
材料科学
·
能源科学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Hui Chen,Wengao Zeng,Yutang Liu,Wanyue Dong,Tao Cai,Lin Tang,Juan Li,Wenlu Li
It is important to find an effective way to enhance the photocatalytic efficiency of metal–organic frameworks. In this work, an organic supermolecule perylene diimide (PDI) semiconductor with a carboxyl terminal was added into the synthesis process of MIL-53(Fe) crystals. The PDI/MIL-53(Fe) (PM) composite photocatalyst was first obtained. The TC-H photodegradation rate of the most efficient 5PM was nearly 94.08% within 30 min, whose apparent reaction rate constant (k) is 4 times that of PDI and 33 times that of MIL-53(Fe), respectively. By investigation and characterization, it has been found that PDI nanofibers were dispersed and fixed in MIL-53(Fe) and bonded to each other by covalent bonds. The radical trap experiments and electron spin resonance analysis illustrated that hydroxyl radical (·OH), superoxide radical (·O2–), and photogenerated holes (h+) were active species. Combined with the band structure of PDI and MIL-53(Fe), it is proposed that the PM photocatalyst was a Z-scheme heterojunction mechanism. Therefore, PM photocatalysts showed excellent charge separation and transfer ability. The performance improvement of 5PM is due to enhanced visible light absorption, efficient charge separation, and excellent redox potential. Five cyclic photocatalytic tests and experiments further demonstrate that the 5PM photocatalyst has a promising future for pollutant removal.
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Linbo Luo,Sheying Dong,Hao Cui,Longhui Sun,Tinglin Huang
The ecosystems and human health were seriously threatened by hexavalent chromium (Cr(VI)) in wastewater. In this article, using the idea of the highly matched energy band structure between indium sulfide (In 2 S 3 ) and MIL-53(Fe), a Type-II heterojunction has been constructed by loading In 2 S 3 on MIL-53(Fe) microrod to overcome the fault like high recombination rates of photogenerated electron-holes of In 2 S 3 . The composite with 20:1 mass ratio of In 2 S 3 to MIL-53(Fe) (IM-2) was adopted as an optimal sample for efficient photocatalytic Cr(VI) reduction under visible light . Various characterization techniques were used to verify the characteristics of composites and delved into the structure-effect relationship between this heterojunction and its activity. Results showed that the reaction rate constants of the photoreduction process over IM-2 was ~ 4 and 26 times higher than those of pure In 2 S 3 and MIL-53(Fe), respectively, and the catalyst could maintain superior removal efficiency (88.6%) and steady crystal structure after four cycles. First-principles calculations further illustrated that the heterostructure formed between In 2 S 3 and MIL-53(Fe) could effectively accelerate the separation of photogenerated electrons and holes, thus improving the photocatalytic reduction performance. Moreover, the active species analyses revealed that the superoxide radicals and electrons were mainly involved in the reduction of Cr(VI).
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2023
·
IF 8.8
Yu-Han Sun,Liu Yang,Xian-Xian Ji,Yuan-Zhen Wang,Yu-Long Liu,Ying Fu,Fei Ye
Flusilazole is a triazole fungicide with residues that are potentially toxic to humans. It enters the human body mainly through food, although its bactericidal activity is substantial. In this study, an electrochemical sensor Fe/Fe 2 O 3 @C with a core–shell structure was constructed to efficiently detect flusilazole by annealing MIL-53(Fe) which was prepared by a simple solvothermal method. Transmission electron microscopy and scanning electron microscopy were used to characterize the apparent morphology of MIL-53(Fe) and Fe/Fe 2 O 3 @C , and their structures were further characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, powder X-ray diffraction, and the mapping of elements by energy dispersive spectroscopy. The electrochemical behavior of Fe/Fe 2 O 3 @C in the detection of flusilazole was evaluated by differential pulse voltammetry under optimal conditions. The results of the study indicate that the Fe/Fe 2 O 3 @C electrochemical sensor displayed excellent detection capabilities for flusilazole, where the sensor exhibited a wide detection range from 1.00 × 10 −4 to 1.00 × 10 −12 mol/L with an incredibly low LOD of 593 fM, making it highly sensitive to trace amounts of flusilazole. Moreover, Fe/Fe 2 O 3 @C demonstrated superior reproducibility, stability, and resistance to interference, highlighting its reliability in practical applications. The sensor was also successfully utilized to quantitatively detect flusilazole in various real samples, which suggests that Fe/Fe 2 O 3 @C has broad-spectrum environmental resistance and can effectively and rapidly detect flusilazole residues in different types of food items and environmental matrices. The study also delved into the mechanism of Fe/Fe 2 O 3 @C for the detection of flusilazole, providing a deeper understanding of the functionality of this sensor. Overall, these findings emphasize the practical significance of Fe/Fe 2 O 3 @C as an electrochemical sensor, showcasing its potential for real-world applications in food safety and environmental monitoring.
研究领域:
分析化学
·
食品安全
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Inorganic and Organometallic Polymers and Materials
·
2025
·
IF 4.9
Yu Qinyuan,Li Jiahui,Wang Yufen,Wei Xuedong
Transition metal sulfides (TMS) have drawn increasing research interest owing to their unique electronic structure. They hold broad prospects in accelerating the sluggish oxygen evolution reaction (OER) during water electrolysis. Metal-organic frameworks (MOFs) feature controllable electronic structures and specific surface areas, which facilitate the adsorption of reactants and expedite interfacial electron transfer. Leveraging the above-mentioned advantages of the two materials, a kind of composite electrocatalyst, CuCo 2 S 4 @MIL-53(Fe)/NF, was synthesized by growing MIL-53(Fe) in-situ onto CuCo 2 S 4 nanowires supported on nickel foam. This composite electrocatalyst can accelerate charge transfer, significantly increase the number of active sites, and enhance both electrocatalytic activity and stability. The electrocatalyst CuCo 2 S 4 @MIL-53(Fe)/NF can drive the OER with an overpotential of 390 mV at a current density of 100 mA·cm −2 . Moreover, it still demonstrates excellent catalytic activity after 75 h of testing. This study not only broadens the avenues for sulfide composites but also provides an experimental basis and support for the direct combination of metal chalcogenides and Fe-based MOFs as electrocatalysts.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2024
·
IF 12.2
Jiami Ma,Zhixin Hu,Weihong Guo,Cheng Ni,Pan Li,Bosheng Chen,Songhua Chen,Jinlong Wang,Yanbing Guo
Ground−level ozone (O 3 ) pollution poses a significant threat to both ecosystem sustainability and human health. The catalytic decomposition of O 3 presents as a promising technology to address the issues of O 3 pollution. This study undertook the synthesis of various functionalized metal−organic framework (MOF) catalysts ( i.e., X-MIL-53(Fe) (X = H, NH 2 , NO 3 )) to delve into the influence of ligand functional groups on skeletal structure and catalytic efficacy, particularly focusing on unraveling the mechanism of O 3 catalytic decomposition under humid conditions. NH 2 -MIL-53(Fe) catalyst achieved complete O 3 decomposition under ambient temperature and high humidity conditions (RH=75 %), exhibiting a reaction rates (mol·m −2 ·s −1 ) 129 and 10.5 times greater than that of MIL-53(Fe) and NO 2 -MIL-53(Fe). The NH 2 group promotes electron flow within the backbone towards the hydroxyl group (OH) linked to Fe atom. In humid O 3 , H 2 O molecules augment the interaction between O 3 and NH 2 -MIL-53(Fe), and OH is converted to·O 2 − after deprotonation, promoting O 3 decomposition. Additionally, leveraging three−dimensional (3D) printing technology, a monolithic catalyst for O 3 decomposition was prepared for application. This study not only advances understanding of the mechanisms underlying O 3 decomposition but also offers practical solutions for addressing O 3 pollution at humid conditions.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 5
·2102-2110
·
IF 3.288
Shuangyan Meng,Wei Zeng,Mingming Wang,Litong Niu,Shaoping Hu,Bitao Su,Yaoxia Yang,Zhiwang Yang,Qunji Xue
Polydopamine/MIL-53(Fe) (PDA/MIL-53(Fe)) nanocomposite photocatalysts were synthesized with PDA (PDA = polydopamine) and MIL-53(Fe) using a nature-mimicking method. The structures, morphologies, optical properties and thermal stabilities of all the synthesized materials were characterized using a series of methods. In particular, the separation efficiency of photogenerated charge significantly increased after the incorporation of PDA into MIL-53(Fe), which resulted in an elevated photocatalytic activity of PDA/MIL-53(Fe) compared with the control groups. The PDA/MIL-53(Fe) nanocomposite could accelerate the conversion of primary or secondary alcohols into the corresponding aldehydes or ketones with a high specificity by direct hole-involving oxidation under visible-light irradiation and room temperature. The catalysts could be cycled at least three times without a significant decrease in the catalytic activity and this result showed the excellent recyclability and stability of the catalysts.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PHYSICS
·
2024
·
IF 2
Qian Liu,Panpan Xu,Qianqian Zhang,Guangming Han,Ling Li,Limin Zhou
A series of novel MIL-53(Fe)/CoWO 4 composites were synthesized by combining MIL-53(Fe) and CoWO 4 nanoparticles via solvothermal method. The structural characterizations showed that CoWO 4 nanoparticles were uniformly distributed on the surface of hexagonal bipyramid MIL-53(Fe). Combining XPS and Mott-Schottky plots, a Z-scheme heterojunction was formed between MIL-53(Fe) and CoWO 4 , resulting in a significant improvement in the electron-hole pair separation efficiency. UV–vis diffused reflectance spectra indicated that the optical arrange of MIL-53(Fe)/CoWO 4 composites were expanded to visible light. The photocatalytic degradation experiments under visible light irradiation showed that MIL/CWO-60 synergistically with PMS degraded 90.5 % of TC-HCl within 50 min. The XRD spectra of used and unused composites were identical, indicating good stability in four consecutive cycles. Electron paramagnetic resonance (EPR) and free radicals trapping experiment revealed that active species included O 2− , SO 4 − , h + , OH and 1 O 2 , and mechanism of the synergistic degradation of TC-HCl by MIL-53(Fe)/CoWO 4 composites and PMS was proposed.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）