Improvement of adsorbent materials for CO2 capture by amine functionalized mesoporous silica with worm-hole framework structure
Amine functionalized mesoporous silica MSU-J with 3-D connective channel is employed as an effective absorbent for CO 2 . CO 2 adsorption measurements were conducted by gravimetry to investigate the effects of (i) framework structure, (ii) mesoporous structure, (iii) the type of organic amine, (iV) hydrolyzation treatment, (V) cycle performance. Comparing with tetraethylenepentamine (TEPA) functionalized SBA-15, TEPA functionalized MSU-J has lower gas diffusion resistance. The CO 2 uptake of 25MSU-J is 139.6 mg·g −1 , which is almost 2.5 times than that of SBA-15 of 58 mg·g −1 at 20 wt% TEPA loading. The different textured MSU-J is synthesized at 25 °C, 45 °C, 65 °C and impregnated with TEPA. 65MSU-J synthesized at 65 °C exhibits the larger pore size (16.2 nm) and CO 2 adsorption capacity due to pore size instead of larger specific surface area is more feasible for CO 2 diffusion. The MSU-J is impregnated with tetraethylenepentamine (TEPA), diethylenetriamine (DETA), triethylenetetramine (TETA). TEPA impregnated MSU-J possesses higher thermostability (200 °C) and CO 2 capture (164 mg·g −1 ) than counterparts, due to higher N content and the stronger combination between support and amine. The regeneration of Si OH from Si O Si effectively improves the CO 2 adsorption capacity. Both MSU-J and hydrolyzing MSU-J exhibit good cycle performance of CO 2 capture after 6 times cycle.
危险品化学品经营许可证（带存储）