Significantly enhancing the performance of PEDOT: PSS/Si hybrid solar cells by simply introducing a MoOX interface layer
The formation of ohmic contact between the carrier transport layer and the electrode is necessary for the high-performance solar cells. However, in the PEDOT: PSS/Si hybrid solar cells, the low conductivity of PEDOT: PSS and the high contact barrier between PEDOT: PSS and Ag electrodes result in high contact resistance, which inhibits the improvement of cell efficiency. In this work, the above two issues were improved simultaneously by simply introducing a MoO X interface layer between PEDOT: PSS and Ag electrodes. The detailed characterization and analytical results show that the quinoid structure of PEDOT: PSS films and the Mo 5 + with metallization electricity properties increased significantly due to the interaction between PEDOT: PSS and MoO X , reducing the resistivity of PEDOT: PSS. At the same time, the contact potential barrier was reduced due to the formation of MoO X /Ag composite electrodes with high work function (WF). In addition, the PEDOT: PSS/MoO X films with higher WF led to a higher built-in electric field. Due to these collaborative improvements, a PEDOT: PSS/Si solar cell with a high power conversion efficiency (PCE) of 15.02 % was achieved. This work provides a new idea to modify the interface between PEDOT: PSS and Ag electrodes for improving the PCE of PEDOT: PSS/Si hybrid solar cells.
危险品化学品经营许可证（带存储）