CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Jiahao Chen,Bin Wang,Kai Yuan,Yutang Kang,Shasha Feng,Feng Han,Hongmiao Wu,Rongfei Zhou,Zhaoxiang Zhong,Yiqun Fan,Weihong Xing
The SiC catalytic membrane combining dust removal and denitration can realize the efficacious treatment of atmospheric pollutants. Unfortunately, a large amount of SiO 2 , formed by the partial oxidation of SiC at a high temperature, results in the decreased chemical resistance of SiC catalytic membrane. In addition, the complicated preparation processes and susceptible to loss of catalytic components under harsh conditions restrict the industrial application of SiC catalytic membranes. Here, the Cu-SAPO-34(D)/SiC catalytic membranes were directly prepared via a facile one-pot hydrothermal synthesis method, which ingeniously utilized the generated SiO 2 as a Si source to participate in the growth of Cu-SAPO-34 zeolites. Excellent binding strength and chemical resistance were simultaneously realized for the SiC catalytic membranes. As a comparison, a Cu-SAPO-34(I)/SiC catalytic membrane was fabricated via the conventional two-step ion-exchange method. The 0.2 Cu-SAPO-34(D)/SiC (Cu molar ratio of 0.2) achieved the best NH 3 -SCR performance among the prepared catalytic membranes for its highly active copper and oxygen species, abundant Lewis acid sites and remarkable redox capacity. When implementing the simultaneous removal of NO and PM, the 0.2 Cu-SAPO-34(D)/SiC catalytic membrane achieved a high NO degradation performance of 98% from 200 to 280 °C, coupled with an excellent PM 0.3 (model dust with average size of 300 nm) filtration performance of 99.99%. These results were better than those of the Cu-SAPO-34(I)/SiC catalytic membrane (92% for NO degradation and 99.98% for PM 0.3 filtration). The one-pot in situ synthesis of Cu-SAPO-34(D)/SiC catalytic membrane with enhanced binding strength and chemical resistance provides a novel strategy for preparation of high-performance SiC catalytic membrane with double benefits.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Huiyun Xia,Zeliang Wu,Wenshuo Zhang,Lifang Song,Xu Li,Liying Cui,Yanhui Niu
In this study, a BiOI/Bi 5 O 7 I photocatalyst is synthesized using a co-precipitation method. The degradation efficiency of NO can reach 70 % under visible light. Subsequently, water-based polyurethane is used as the film-forming matrix, and fluorinated silane is used as low surface energy components, a BiOI/Bi 5 O 7 I water-based polyurethane photocatalytic superhydrophobic coating (FBIU) is prepared by a layer-by-layer spraying technique. The high catalytic activity of BiOI/Bi 5 O 7 I comes from the heterojunction effect of the two semiconductors and the improved interface, which enables the degradation rate of NO to reach 76.9 %, accompanied by extremely low NO 2 conversion rate (<1 %). The wettability, chemical stability and mechanical stability of the FBIU coating are studied to investigate its impact on the long-term oxidative degradation performance of NO. And the self-cleaning characteristics and specific micro-nano structure of FBIU improve the wear resistance of the coating, manifested as a contact angle of 157.8° to water after 320 times of sandpaper polishing. Finally, based on the photocatalytic mechanism of BiOI/Bi 5 O 7 I semiconductor materials, a green long-term purification and degradation mechanism of NO by coatings is proposed. This can provide some insights into the design of air purification coatings for building exterior walls.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Guanyu Liu,Huiyun Xia,Yanhui Niu,Xu Zhao,Gengtong Zhang,Lifang Song,Huaxin Chen
Practical significance in terms of the long-term effective application of photocatalytic coatings is greatly challenged by its easy pollution and poor self-cleaning performance. In this paper, a self-cleaning photocatalytic WO 3 -TiO 2 nanorod (MWT) /PDMS building coating (MWT coating) was prepared by spraying methods. The surface hierarchical structure fabricated by MWT and PDMS was a crux to construct a superhydrophobic surface, which endowed MWT coating with self-cleaning performance. Besides, the MWT coating exhibited prominent durability and antifouling property after 450 d practical application of the external wall. The excellent self-cleaning property of the coating was confirmed by the removal and resistance to the adhesion of powder particles. Meanwhile, the photocatalytic properties of MWT endowed MWT coating with the ability to degrade organic pollutants on the surface. The color difference of the coating polluted by methyl red was only 1.18 and 4.77 after 24 h UV and visible irradiation, respectively. This mutual benefit effect of self-cleaning and photocatalysis was also reflected in the degradation of NO. In the first five cycles, the degradation efficiency of NO decreased by 4.74% gradually under visible light due to the adhesion of oxidation products, and most of the MWT on the coating surface was regenerated after flushing, the PCD efficiency increased by 3.71%. Furthermore, after 30 days of outdoor weathering test, the PCD efficiency of MWT coating decreased by 11.74% and 12.05% under UV and visible light, respectively, which lays a foundation for the long-term effectiveness of the MWT coating in the process of use.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
Toxics
·
2024
·Vol. 12
·期 7
·524
·
IF 3.9
Yuanzhen Li,Yinming Fan,Yanhong Wang,Yinian Zhu,Zongqiang Zhu,Shengpeng Mo,Xiaobin Zhou,Yanping Zhang
VOCs can be used instead of ammonia as a reducing agent to remove NO, achieving the effect of removing VOCs and NO simultaneously. Due to the high energy consumption and low photocatalytic efficiency required for conventional thermocatalytic purification, photothermal coupled catalytic purification can integrate the advantages of photocatalysis and thermocatalysis in order to achieve the effect of pollutants being treated efficiently with a low energy consumption. In this study, samples loaded with Co and Mn catalysts were prepared using the hydrothermal method on Fe-MOF with various morphologies. The catalytic performance of each catalyst was analyzed by studying the effects of their physicochemical properties through various characterizations, including XRD, SEM, BET, XPS, H2-TPR, TEM and O2-TPD. The characterization results demonstrated that the specific surface area, pore volume, high valence Co and Mn atoms, surface adsorbed oxygen and the abundance of oxygen lattice defects in the catalysts were the most critical factors affecting the performance of the catalysts. Based on the results of the performance tests, the catalysts prepared with an octahedral-shaped Fe-MOF loaded with Co and Mn showed a better performance than those loaded with Co and Mn on a rod-shaped Fe-MOF. The conversions of acetone and NO reached 50% and 64%, respectively, at 240 °C. The results showed that the catalysts were capable of removing acetone and NO at the same time. Compared with the pure Fe-MOF without Co and Mn, the loaded catalysts showed a significantly higher ability to remove acetone and NO simultaneously under the combination of various factors. The key reaction steps for the catalytic conversion of acetone and NO on the catalyst surface were investigated according to the Mars–van Krevelen (MvK) mechanism, and a possible mechanism was proposed. This study presents a new idea for the simultaneous removal of acetone and NOxby photothermal coupling.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）