APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Liming Dai,Chenchen Fang,Fanglei Yao,Xiaoyuan Zhang,Xuefeng Xu,Shangling Han,Jingyao Deng,Junwu Zhu,Jingwen Sun
In-situ generated hydroxides and oxyhydroxides have been gradually recognized as the real active sites of metal organic frameworks (MOFs) towards the oxygen evolution reaction (OER). Nevertheless, the fine phase evolution process is still less of concern and elusive. Herein, we successfully construct serious of Ni-MOFs with differing thickness ranging from 1 nm to 270 nm through a competitive coordination strategy. Utilizing the operando resonance spectroscopy, an accurate phase inversion behavior of the Ni-MOFs has been witnessed during the OER, and demonstrated as a thickness-dependent process. Ultrathin architecture is identified as a positive factor to promote the exchange between MOFs ligands and applied electrolyte during the electrochemical test. Hence, after removing most of the internal ligands, 2D MOFs favor to be transformed as β-NiOOH, which is more active than the generated γ-NiOOH in bulky system. The density function theory (DFT) calculation alongside with the in-situ electrochemistry tests further affirm the β/γ-NiOOH transformation behavior. This work offers a new understanding of the electrocatalytic mechanism from the view point of phase evolution in 2D MOFs.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Chemosensors
·
2024
·Vol. 12
·期 3
·39
·
IF 3.7
Yu Zhang,Chang Liu,Rongqiu Yan,Chenghong Lei
Bipyridyl Ruthenium-decorated Ni-MOFs on multi-walled carbon nanotubes (MWCNT-RuBpy@Ni-MOF) were synthesized. In an alkaline solution, the glucose was electrocatalytically oxidized at +0.5 V vs. Ag/AgCl at the composite interface of MWCNT-RuBpy@Ni-MOF on a glassy carbon electrode. The Ni3+/Ni2+redox couples in Ni-MOFs played a key role as the active center for the catalytic oxidation of glucose at the electrode, where both RuBpy and MWCNTs enhanced the current responses to glucose. The resulting enzymeless glucose sensor from MWCNT-RuBpy@Ni-MOF exhibited a wide range of linear responses, high sensitivity and selectivity for the determination of glucose.
研究领域:
材料科学
·
电化学
·
纳米技术
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2024
·
IF 5.6
Xialin Ji,Xiaoke Tian,Mengqing Zhou,Changzhou Chen,Jianchun Jiang
In this study, different kinds of lignin, including enzymatic hydrolysis of lignin (EHL), alkaline lignin (AL), kraft lignin (KL) and sodium lignosulfonate (LS) were investigated as precursor to prepare Ni@BTC@X (X= EHL, AL, KL, LS) catalysts using a traditional hydrothermal method with Ni-MOF for HDO upgrading of lignin derivative vanillin (VAN) to generate high value chemical 2-methoxy-4-methylphenol (MMP). The catalytic performance of these catalysts was investigated under different reaction conditions, and it was explored that the conversion of VAN was close to 100 % and the MMP yield was close to 90 % under the optimal conditions (Ni@BTC@LS catalyst, 220 ℃, 4 h, isopropanol, 2 MPa N 2 ). Various physical-chemical characterization results verified that the effects of active sites Ni, porous structure of lignin biochar support and electronic properties of the catalysts played a significiant role in HDO of lignin derived VAN. Additionally, synergistic effect of the highly homogeneously dispersed oxygen vacancies and acidic sites also promoted the VAN conversion efficiency. This work developed a strategy combing the advantages of MOFs and biomass derived substrates for manufacturing novel lignin/MOFs materials in the catalytic field.
研究领域:
化学工程
·
环境科学
·
催化材料
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2023
·
IF 5.9
Xiaohui Yang,Chengjun Tang,Lihong Hu,Yonghong Zhou,Minghao Zhou
The industrial production of monophenols was mainly dependent on fossil resources, due to growing energy demand and escalating environmental issues, more efficient and sustainable strategy, such as utilization of biomass as raw materials to economically produce monophenols, was desired, which could liberate us from the reliance on fossil resource and was of great industrial and social significance. Herein, a novel strategy was reported to produce biomass-derived monophenols from lignin by directly deconstructing C-O bond under mild conditions. A series of NiM-MOFs (M=Co, Mo, and Cu) derived bimetallic catalysts were synthesized via a simple hydrothermal method, which were characterized by XRD , SEM , TEM , XPS and NH 3 -TPD. The synergistic effect between the Ni and Mo greatly improved the catalytic activity and inhibited the transformation to by-products. In addition, we explored a new binary solvents system of MeOH-THF to effectively enhance the selectivity of monophenols. Under optimal catalytic conditions, Ni4Mo1/C-BN catalyst could break the C-O bonds in lignin dimer under 160 ℃ to afford phenol and benzoic acid , and the possible reaction pathway was proposed. The high yield of lignin oil from the oxidation of various realistic lignin also confirmed the superiority of this catalytic system. The lignin depolymerization products were characterized by element analysis, GPC and GC-MS, confirming the presence of mainly guaiacyl-type (G) products, while the highest yield was assigned to vanillin.
研究领域:
生物质化学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
Biosensors-Basel
·
2023
·Vol. 13
·期 5
·508
·
IF 5.4
Ya Yang,Wenhui Ji,Yutao Yin,Nanxiang Wang,Wanxia Wu,Wei Zhang,Siying Pei,Tianwei Liu,Chao Tao,Bing Zheng,Qiong Wu,Lin Li
Rapid and accurate detection of changes in glucose (Glu) and hydrogen peroxide (H2O2) concentrations is essential for the predictive diagnosis of diseases. Electrochemical biosensors exhibiting high sensitivity, reliable selectivity, and rapid response provide an advantageous and promising solution. A porous two-dimensional conductive metal–organic framework (cMOF), Ni-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), was prepared by using a one-pot method. Subsequently, it was employed to construct enzyme-free paper-based electrochemical sensors by applying mass-producing screen-printing and inkjet-printing techniques. These sensors effectively determined Glu and H2O2concentrations, achieving low limits of detection of 1.30 μM and 2.13 μM, and high sensitivities of 5573.21 μA μM−1cm−2and 179.85 μA μM−1cm−2, respectively. More importantly, the Ni-HHTP-based electrochemical sensors showed an ability to analyze real biological samples by successfully distinguishing human serum from artificial sweat samples. This work provides a new perspective for the use of cMOFs in the field of enzyme-free electrochemical sensing, highlighting their potential for future applications in the design and development of new multifunctional and high-performance flexible electronic sensors.Keywords:Ni-MOFs;paper-based sensors;electrochemical sensor;non-enzymatic catalysis;hydrogen peroxide;glucose
研究领域:
分析化学
·
生物传感器
·
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysts
·
2026
·Vol. 16
·期 5
·409
·
IF 4.5
Linhao Zhang,Hong Liu,Jianming Zhang,Fagen Wang
Harnessing low-grade thermal energy from industrial processes and the environment represents an attractive route toward sustainable chemical production. In this work, we report a thermoelectrocatalytic (TE-Catal) system capable of converting small temperature gradients into chemical energy for hydrogen peroxide (H2O2) generation. A hybrid catalyst composed of nickel-based metal–organic frameworks (Ni-MOFs) nanoparticles integrated with carbon nanotubes (CNTs), Ni-MOFs/CNTs, was synthesized through a facile one-pot strategy. Under a temperature gradient, the thermoelectric response of the Ni-MOFs induces charge carrier generation through the Seebeck effect, enabling interfacial redox reactions that produce H2O2. However, rapid recombination of thermally generated carriers typically limits catalytic efficiency. By coupling Ni-MOFs with conductive CNTs networks, charge separation and transport are significantly enhanced due to the strong interfacial interaction and the high electrical conductivity of CNTs. As a result, the Ni-MOFs/CNTs nanohybrids exhibit greatly improved H2O2generation rate of ~111.7 µmol g−1h−1compared with pristine Ni-MOFs (31.8 µmol g−1h−1). Thermoelectric electrochemical measurements confirm that the CNT incorporation effectively promotes carrier migration and suppresses recombination. This study demonstrates the potential of MOF-based thermoelectric nanostructures for transforming waste heat into valuable chemical products.
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2020
·
IF 3.687
Haijun Pan,Yuanyuan Peng,Xinhuan Lu,Jie He,Lin He,Chenlong Wang,Fanfan Yue,Haifu Zhang,Dan Zhou,Qinghua Xia
1,3,5-benzenetricarboxylate (BTC) and 4,4′-bipyridine (BIPY) are employed in the synthesis of dual ligands Ni-MOFs. The magnetic Ni@CN nanocatalyst is prepared by direct pyrolysis of Ni-MOFs in N 2 atmosphere, which exhibited excellent activity in selective hydrogenation of nitrobenzene (NB) to aniline (AN) at 60 °C, 2.0 MPa H 2 . The conversion of NB can reach 99.1 mol%, and the selectivity of AN is over 99 %. A series of characterizations are obtained by XRD, Raman, XPS, SEM, TEM, TPR and TGA. It is found that the synergic effect of Ni species and N contributes to the increase of catalytic activity of the catalyst. Cycling tests proved that the prepared catalyst could be reused ten times without a visible reduction in catalytic activity of hydrogenation. The excellent stability and activity of Ni@CN nanocatalyst could be assigned to the porosity of carbon material doped with nitrogen, derived from dual ligands Ni-MOFs.
研究领域:
材料科学
·
催化化学
✓ 已验证
DOI
高影响因子
MOLECULES
·
2023
·Vol. 28
·期 11
·4411
·
IF 4.6
Fuhua Wei,Kui Wang,Wenxiu Li,Qinhui Ren,Lan Qin,Mengjie Yu,Zhao Liang,Meng Nie,Siyuan Wang
This work studies the use of Fe/Ni-MOFs for the removal of ciprofloxacin (CIP) in wastewater. Fe/Ni-MOFs are prepared by the solvothermal method and characterized by X-ray diffraction (XRD), a scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and a thermal gravimetric analyzer (TG). Under the conditions of the concentration of 50 ppm, a mass of 30 mg, and a temperature of 30 °C, the maximum adsorption capacity of ciprofloxacin removal within 5 h was 232.1 mg/g. The maximum removal rate was 94.8% when 40 mg of the Fe/Ni-MOFs was added to the solution of 10 ppm ciprofloxacin. According to the pseudo-second-order (PSO) kinetic model, the R2values were all greater than 0.99, which proved that the adsorption theory of ciprofloxacin by Fe/Ni-MOFs was consistent with the practice. The adsorption results were mainly affected by solution pH and static electricity, as well as other factors. The Freundlich isotherm model characterized the adsorption of ciprofloxacin by Fe/Ni-MOFs as multilayer adsorption. The above results indicated that Fe/Ni-MOFs were effective in the practical application of ciprofloxacin removal.Keywords:metal–organic frameworks;antibiotics;adsorption
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LANGMUIR
·
2024
·
IF 3.7
Xu Chuan Cao,Bai Chao Zhang,Jing Cui,Chao Suo,Xiao Chuan Duan,Shao Hui Guo,Xian-Ming Zhang
Plasmonic materials are fundamental photosensitizer materials for photocatalytic reactions. Various structures, including core–shell types, satellite types, and distribution types, have been designed and prepared for the optimization of photocatalytic reactions. However, understanding the profound enhancement mechanism of various structures is still challenging. Thus, the plasmonic coverage is considered to be an index for analyzing the influence mechanism. Here, Au@Ni-MOF core–shell flower sphere-like photocatalysts are prepared, and the size of the flower sphere can be precisely regulated by varying the amount of Au. Thus, different plasmonic coverages are realized through the tuning of spheres of different sizes. The high plasmonic coverage of catalysts can enhance visible light absorption, facilitate the generation of photogenerated electron–hole pairs, and shorten the photogenerated carrier transport distance. Moreover, the exponential relationship between the photocatalytic hydrogen production performance and the plasmonic coverage can also be used as a guide for material design. As a result, a photocatalytic hydrogen production rate of 3389 μmol·g–1·h–1 is achieved in the Au@Ni-MOF sample with high plasmonic coverage, which will advance the plasmonic application in photocatalytic reactions.
研究领域:
材料科学
·
纳米技术
·
催化
·
光化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 28
·1-15
·
IF 2.8
Wang Jia-Wei,Meng Tian-Li,Ma Ying-Xia,Lei Lei,Li Jing,Ran Fen
Metal–organic frameworks (MOFs) have low conductivity, which is not conducive to further application. To address the issue, in this work, using carboxylation multiwall carbon nanotubes (MWCNTs-COOH) as carbon materials, benzene-1,4-dicarboxylic acid (PTA) as organic ligands, nickel nitrate hexahydrate (Ni(NO 3 ) 2 ·6H 2 O) as transition metal ions precursors, MWCNTs decorated with nickel MOFs (Ni-MOFs/MWCNTs) nanohybrids were fabricated via in situ growth by a one-pot solvothermal method. The electrochemical properties of the Ni-MOFs/MWCNTs nanohybrids obtained by adjusting the dosage of MWCNTs-COOH and the experimental conditions as electrode materials for supercapacitors (SCs) were investigated. The results showed that the Ni-MOFs nanoflowers self-assembled by nanorods were in situ growth on the MWCNTs, which could avoid the agglomeration of Ni-MOFs and MWCNTs, enhance the specific surface area, and expose more active sites to improve the electrochemical properties. The specific capacity of the Ni-MOFs/MWCNTs nanohybrids as electrode materials obtained at the optimal experimental conditions was 749.6 C g −1 at 1.0 A g −1 .
研究领域:
材料科学
·
电化学
·
纳米技术
·
储能
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Xinbo Zhao,Huali Li,Weige Chen,Weijie Li,Zhiyu Han,Weihua Li
Conventional electromagnetic wave (EMW) absorbing materials often suffer from poor stability in humid and corrosive environments, limiting their real-world applications. In this work, carbon-based composites derived from Ti-Ni bimetallic metal-organic frameworks (MOFs) were synthesized via pyrolysis and investigated as dual-function materials for EMW absorption and corrosion protection. The composites exhibit excellent impedance matching and strong attenuation capability due to the synergistic interaction between the metal oxides and the carbon matrix. A minimum reflection loss of −40 dB and an effective absorption bandwidth of 4.61 GHz were achieved at an optimized thickness of 4.1 mm. Furthermore, upon incorporation into an epoxy resin coating, the composite displayed outstanding corrosion resistance. After immersion in a 3.5 wt% NaCl solution for 7 days, good stability was still maintained. This study presents a promising strategy for designing multifunctional materials with integrated EMW absorption and corrosion resistance, offering broad application potential in marine, aerospace, and communication sectors.
研究领域:
材料科学
·
电磁学
·
腐蚀工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Fei Wu,Mengyun Ling,Lingyun Wan,Pei Liu,Yabin Wang,Qiuyu Zhang,Baoliang Zhang
Herein, we construct two metal–organic frameworks (MOFs) composite nanoflowers (NFs) with anisotropic binary assembled structures by a facile one-pot method. Different from the two-step epitaxial growth method, the anisotropic assembly of the binary MOFs (MOF-5 and MIL-88B) in the mixed system can be realized without preparing the template MOFs. The ions coordinated self-assembling behaviors during the formation of the three-dimensional (3D) structure are clarified. The absorbing mechanisms of the derivative absorber are elucidated. The results indicate that the special hierarchical assembled structure endows absorbers with rich heterogeneous interfaces, porous structure, suitable impedance matching and complementary loss mechanisms. The optimized absorbers FeCoZn@C NFs and FeNiZn@C NFs exhibit outstanding microwave absorption performance. Only with a matching thickness of 1.9 mm, the effective absorbing bandwidth (EAB, reflection loss (RL) < −10 dB) of the absorber covers 6.0 GHz (12–18 GHz, the entire Ku band). The minimum reflection loss (RL min ) reaches −53.1 dB (loss of electromagnetic waves above 99.999%). This study might shed light on the preparation of high-performance microwave absorbers with sophisticated structures.
研究领域:
材料科学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）