Bo-Mei Liu,Xiao-Xuan Guo,Lu-Yu Cao,Lin Huang,Rui Zou,Zhi Zhou,Jing Wang
The development of phosphor-converted light-emitting diodes (pc-LEDs) in the second near-infrared window (NIR-II, 1000–1700 nm) represents an important, newly emerging, and dynamic field in NIR spectroscopy. Unfortunately, lacking efficient NIR-II phosphors that can be excited by commercial blue LED chips impedes NIR spectroscopy applications. Herein, a donor–acceptor strategy is developed by introducing Cr 3+ sensitizers to greatly enhance the blue-light excitation efficiency of NIR-II-emitting MgO:Cr 3+ ,Ni 2+ phosphor. Consequently, a high-efficiency blue-light-excitable MgO:Cr 3+ ,Ni 2+ phosphor that gives a NIR-II emission at 1335 nm with a full width at half-maximum (FWHM) of 235 nm, is demonstrated. The product has a high internal quantum efficiency of 92.7 % and excellent thermal stability, maintaining 83.0 % of the room temperature emission intensity at 150 °C. Excitingly, the fabricated NIR-II pc-LED device shows a high NIR-II optical power (27.4 mW@350 mA). The performances of the achieved NIR-II pc-LED are almost the best results until now. Additionally, multifunctional applications including nondestructive detection and anti-counterfeiting of the NIR-II light source are demonstrated. These results are pretty crucial for the further development of NIR-II spectroscopy and imaging technology.
Laser-driven lighting technology is a remarkable innovation in the field of solid-state lighting. High-efficiency white light sources have been commercially produced, but laser-driven near-infrared (NIR) light source has not yet been captured, which hindered the numerous optoelectronic applications such as NIR spectroscopy and imaging techniques. Inspired by the observation that laser-driven lighting could break the limited power density and achieve effective output optical power density under higher incident optical power density, here, a novel NIR MgO:Cr3+,Ni2+ phosphor-in-glass film was prepared and combined on the sapphire substrate to fabricate laser-driven NIR light source. The results show that laser-driven NIR light source based on blue laser and MgO:Cr3+,Ni2+ phosphor-in-glass film combination could achieve a NIR output optical power density of 5.3 mW mm−2, which is 5 times higher than LED-driven NIR light source based on the same MgO:Cr3+,Ni2+ phosphor-in-glass film. Finally, we successfully demonstrated the potential applications of the as-fabricated laser-driven NIR light source in the field of night vision and high-penetration imaging. This finding provides an approach to achieving high-performance NIR light sources thereby opening up a new avenue for the exploration of NIR spectroscopy technology.
危险品化学品经营许可证（带存储）