TRIBOLOGY INTERNATIONAL
·
2024
·
IF 6.1
An Liu,Song Gao,Shan Du,Hailin Lu,Junde Guo
Plasma electrolytic oxidation (PEO) has demonstrated significant enhancements in the mechanical properties and corrosion resistance of titanium alloys. Despite these advantages, the presence of micropores and microcracks in the coating can still detrimentally impact tribological properties. This paper introduces a novel approach involving the in-situ growth of a surface structure. The resulting interface structure exhibits outstanding tribological properties under a load of 3 N and a speed of 1.5 cm/s. In contrast to prior studies, improvements are made to the electrical parameters and electrolyte formula of Plasma electrolytic oxidation, facilitating the in-situ growth of MoSe 2 . This results in the formation of a lubricating layer and a robust TiO 2 ceramic coating with excellent adhesion. A systematic analysis of friction, wear characteristics, reveals that MoSe 2 in situ grow on the surface of the PEO coating, within micropores, microcracks, and crater structures after hydrothermal treatment. This process significantly enhances the microporous structure of the coating, with the MoSe 2 film forming a dense and uniform interlocking layer with the PEO lower layer. Dry friction test experiments demonstrate a 33.7% reduction in friction coefficient and a 29% decrease in wear rate compared to the PEO sample, indicating the synergistic effect between the MoSe 2 film and the PEO coating.
研究领域:
材料科学
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
CORROSION SCIENCE
·
2021
·
IF 7.205
Dongdong Zhang,Feng Peng,Jiajun Qiu,Ji Tan,Xianming Zhang,Shuhan Chen,Shi Qian,Xuanyong Liu
Herein, a novel smart chemical strategy for regulating the corrosion reaction to reinforce the plasma electrolytic oxidation (PEO) coating on magnesium by amorphous MnOOH is proposed. The MnOOH film could provide PEO coating with both physical shielding and chemical active healing abilities. During corrosion process, MnOOH spontaneously reacts with the corrosion-produced Mg 2+ and OH – to form layered double hydroxides , resulting in high improvement of the long-term anti-corrosion of PEO coating. Moreover, the PEO/MnOOH coating presented a certain self-healing ability for scratches, and could be used for repairing corrosion defects on further coated films.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Coatings
·
2019
·Vol. 9
·期 12
·867
·
IF 2.33
Diping Zeng,Zhiyi Liu,Song Bai,Jian Wang
In the present work, a coating was prepared on an Al alloy substrate by plasma electrolytic oxidation (PEO). To seal the micro defects in the oxide scale, a siloxane layer was prepared on the PEO coating by sol gel method. The polymer sealant was synthesized from Tetraethoxy silane (TEOS) and methacryloxy propyl trimethoxyl silane (MPTES). The chemical structure of the polymer was studied by Fourier transform infrared spectroscopy (FTIR). The morphologies and microstructure of the PEO coating and siloxane coating were investigated by scanning electron microscopy (SEM). The results showed that siloxane formed a continuous layer on the surface and effectively sealed the micro defects. The corrosion behavior of the coatings in three different corrosion solutions (NaCl, HCl, and NaOH) was examined by electrochemical impedance spectroscopy and potentiodynamic polarization. The corrosion resistance of the sealed coatings was superior to that of the PEO coating because it prevented the penetration of corrosive solutions. The corrosion resistance of the sealed coatings was found to decrease with increasing electrolyte concentration. The work demonstrated that siloxane sealing may greatly enhance the corrosion resistance of Al-based PEO coating in acidic, neutral, and alkaline environments.Keywords:PEO coating;silane polymer;sealing treatment;corrosion resistance
研究领域:
材料科学
·
腐蚀工程
·
表面工程
✓ 已验证
DOI
高影响因子
MATERIALS LETTERS
·
2021
·
IF 3.423
Qi Han,Yan Li,Xiaopeng Lu,Di Mei,Qianqian Chen,Tao Zhang,Fuhui Wang
Antibacterial plasma electrolytic oxidation (PEO) coatings have been fabricated by in-situ incorporation of Ag particles on pure Mg. It was found that the Ag particles have been partly oxidized and incorporated into the layer during coating formation process. Ag containing PEO coatings can strongly inhibit the growth of S. aureus and the antibacterial efficiency of the coatings is mainly associated with the Ag concentration in the layer. The antibacterial rate of the coating reaches 99% and is maintained to be stable when sufficient Ag particles (above 1 wt%) are incorporated into the layer.
研究领域:
材料科学
·
生物材料
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2021
·
IF 4.158
Zefei Yu,An Du,Chenyang Wang,Ruina Ma,Yongzhe Fan,Xue Zhao,Xiaoming Cao
Herein, a ZnO-doped plasma electrolytic oxidation (PEO) composite coating was prepared on the surface of a 1060 Al alloy by adding ZnO nanoparticles (ZnO-NPs) to the composite electrolytes of alkaline sodium silicate (Na 2 SiO 3 ) and sodium hexametaphosphate ((NaPO 3 ) 6 ). To efficiently investigate the coating's microstructure, the detached PEO coating was prepared without damage via an electrochemical method. The morphology and phase composition of the PEO coating were analyzed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD), and an incorporation model of ZnO-NPs was established. The results showed that the addition of ZnO-NPs slightly prolonged the anodic oxidation time and increased the breakdown voltage, whereas the working voltage and final voltage decreased slightly. The XRD results indicated that although the addition of ZnO-NPs did not result in the production of Zn-containing phases, it affected the formation and transformation reactions of other phases. SEM micrographs of the fractured cross-section of detached coating and coating/substrate interface indicated that the ZnO-NPs did not enter the interface layer, nor did it participate in the formation of the cap structure at the interface. Based on the experimental results and the “cascade discharge” model, an incorporation model of ZnO-NPs in PEO has been proposed.
研究领域:
材料科学
·
表面工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）