A loose NF membrane by grafting TiO2-HMDI nanoparticles on PES/β-CD substrate for dye/salt separation
In this study, a high flux loose nanofiltration (NF) membrane was fabricated for the desalination of dye wastewater through a facile method which combined doping and surface grafting. First, PES ultrafiltration substrate was prepared via non-solvent induced phase separation by introducing multi-hydroxyl β-cyclodextrin (β-CD) into the casting solution as hydrophilic additive. Then, titanium dioxide (TiO 2 ) nanoparticles were grafted uniformly on membrane surface with the assistance of 1, 6-hexamethylene diisocyanate (HMDI), resulting in the enhancement of surface hydrophilicity and separation performance of the resultant membranes. Remarkably, the membrane prepared at optimized conditions achieved a high pure water flux (52.0 L·m −2 ·h −1 at 0.2 MPa) and high permeate flux for dyes (e.g. 30.5 L·m −2 ·h −1 for Congo Red at 0.2 MPa). It also exhibited high rejection for dyes (e.g. 97.4% for Congo Red) and high transmittance of salts (e.g. 94.0% for Na 2 SO 4 ). Moreover, the membrane possessed good antifouling performance with a high flux recovery ratio of 93.7% after fouled by humic acid (HA). The results indicated that the novel loose NF membrane had an impressive potential application for dye wastewater treatment.
危险品化学品经营许可证（带存储）