JOURNAL OF RARE EARTHS
·
2024
·
IF 5.2
Aoyang Sha,Huifang Yang,Meiling Jiang,Zhengyan He,Zhenhu Liu,Zhigao Xu,Yaguang Du,Wu Ming,Ru'an Chi
Weathered crust elution-deposited rare earth ores (WREOs) are rich in medium and heavy rare earth. In order to improve the in-situ leaching process, which is prone to landslides and poor permeability, cationic hydroxyethyl cellulose (PQ-10) was used as a novel green swelling inhibitor and percolation promoter and was mixed with conventional leaching agent ammonium sulfate ((NH 4 ) 2 SO 4 ) to form a composite leaching agent to study the performance and mechanism of swelling inhibition and percolation promotion. Adding PQ-10 can inhibit the hydration swelling of WREOs, promote the percolation effect of the leaching agent, improve the rare earth (RE) leaching efficiency, and reduce the impurity aluminum (Al) leaching efficiency. Compared with the conventional leaching agent 2 wt% (NH 4 ) 2 SO 4 , the percolation time is reduced by 50% by using the composite leaching agent (0.02 wt% PQ-10+2 wt% (NH 4 ) 2 SO 4 ). PQ-10 has positively charged quaternary ammonium groups and hydrophilic group hydroxyl groups, which makes it easy to adsorb on WREOs multiple sites through electrostatic interaction and hydrogen bonding, weakening the electrostatic repulsion between mineral particles, reducing the WREOs interlayer spacing, compressing the double electric layer thickness at the solid-liquid interface, weakening the mineral hydration swelling and increasing the percolation rate. The long carbon chains of the polymer entangle and link the fine mineral particles to agglomerate them, increasing their particle size and reducing their hydration dispersion, and preventing blockage of the percolation pores caused by migration of the fine particles through the ore body with the solution. PQ-10 molecules also insert the mineral interlayer and expulsion of the internal water, further inhibiting the swelling of WREOs. Adding PQ-10 reduces the surface tension of (NH 4 ) 2 SO 4 solution, improving the spreading and spreading ability of the solution, reducing the adhesion work between molecules in the solid-liquid phase and the adhesion work reduction factor. It proves that PQ-10 promotes the percolation effect of the leaching process of WREOs. In addition, PQ-10 expands the leaching pore size and seepage channels, further improving the percolation rate.
研究领域:
矿物学
·
环境科学
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2023
·
IF 4.9
Aoyang Sha,Huifang Yang,Zhengyan He,Zhigao Xu,Chenjie Wu,Wu Ming,Ru'an Chi
To solve the problems of the long development period, low mass transfer efficiency and high impurity content in the in-situ leaching process of weathered crust elution-deposited rare earth ores (WCE-DREO), cationic hydroxyethyl cellulose (PQ-10) was composited with conventional leaching agent ammonium sulfate ((NH 4 ) 2 SO 4 ) to form a novel composite leaching agent. The effects of PQ-10 concentration, leaching temperature and leaching flow rate of the composite leaching agent on the leaching kinetics and mass transfer processes of rare earth (RE) and aluminum (Al) were investigated. Compared to the single leaching agent (NH 4 ) 2 SO 4 , the composite leaching agent (2 wt% (NH 4 ) 2 SO 4 +0.02 wt% PQ-10) can reduce the RE leaching equilibrium time from 465 to 130 min and increase the RE leaching efficiency and decrease the Al leaching efficiency. It also facilitates the leaching process of WCE-DREO by increasing the peak concentrations of RE and Al, reducing the theoretical tower plate height (HETP) and improving the leaching mass transfer efficiency. It is indicated that PQ-10 can promote the leaching of WCE-DREO. The leaching process of the composite leaching system conforms to the diffusion kinetic control model. When the PQ-10 concentration is in the range of 0.005 wt% – 0.020 wt%, the reaction orders of RE and Al are 0.73 and 0.54, respectively, which shows a positive effect on the leaching velocity; when the PQ-10 concentration is in the range of 0.030 wt% – 0.060 wt%, the reaction orders of RE and Al are – 1.16 and – 0.75, respectively, which show a negative effect on the leaching velocity. In the range of 10 – 50 °C, the apparent activation energies of RE and Al are 15.02 and 17.31 kJ/mol, respectively, and the higher the leaching temperature, the smaller the HETP and the higher the leaching velocity and mass transfer efficiency. The increase in leaching flow rate contributes to the increase in the longitudinal diffusion velocity of the leaching agent within WCE-DREO, causing a shorter time for RE and Al to reach leaching equilibrium. In addition, the flow rate and HETP are consistent with the Van Deemter equation. At a flow rate of 0.8 mL/min, HETP was minimized and the optimal mass transfer efficiencies is achieved for RE and Al.
研究领域:
冶金工程
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR MATERIALS AND ENGINEERING
·
2020
·Vol. 306
·期 1
·2000506
·
IF 3.853
Zhaojie Yang,Minghua Zhang,Yafei Xiao,Xi Zhang,Minmin Fan
Anion exchange membranes (AEMs) are one of the core components of AEM fuel cells. A series of poly(vinyl alcohol)/polyquaternium-10 (PVA/PQ-10) AEMs with semi-interpenetrating networks (s-IPNs) are prepared by a simple solution-casting method using glutaraldehyde (GA) as a cross-linking agent. Subsequently, the prepared PVA/PQ-10 cross-linked membranes are characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, mechanical analysis, water uptake and swelling ratio tests, ion exchange capacity (IEC) tests, ionic conductivity measurements, and oxidative/alkaline stability tests. The effects of the mass ratio of PVA and PQ-10 and the amount of cross-linking agent GA on the performance of the PVA/PQ-10 cross-linked membranes are systematically explored. The results show that the cross-linked PVA/PQ-10 AEMs have high IEC and low water uptake and swelling ratio, and its maximum ionic conductivity can reach 79.37 mS cm –1 at 80 °C. In addition, the PVA/PQ-10 cross-linked membrane has good oxidative and alkaline stability under optimal preparation conditions. These results may provide valuable insights toward more effective scheme designs and new, simple preparation methods for AEMs with s-IPN structures.
研究领域:
材料科学
·
化学工程
·
能源材料
·
膜技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）