ELECTROANALYSIS
·
2020
·Vol. 33
·期 4
·947-955
·
IF 2.544
Yanqiu Fu,Jinrui Li,Wei Jin,Zhonggang Liu
In this work, a dual-functional electrochemical sensor has been proposed based on Sn-doped defective Bi 2 S 3 (TDDB) microspheres, which exhibited the excellent electrochemical performance on Pb(II) and H 2 O 2 detection. The TDDB offered a satisfied detection limit of 8.0 nM towards Pb(II) with a sensitivity of 96.7 μA ⋅ μM −1 . As a H 2 O 2 sensor, a high sensitivity of 3540 μA mM −1 cm −2 was obtained in a linear range from 0.45 mM to 10 mM with a detection limit of 10 nM. Moreover, the electrochemical detection of Pb(II) in Taihu Lake and H 2 O 2 in human serum was achieved with high reliability and good recovery.
研究领域:
分析化学
·
环境科学
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
Metals
·
2023
·Vol. 13
·期 7
·1253
·
IF 2.9
Jiaming Gao,Haiwei Fu,Chen Liu,Yifan Zhu,Xiuqing Fu
Heavy metal pollution in water, particularly Pb ion pollution, has seriously threatened human life and health. Therefore, the manufacture of efficient and sensitive heavy metal ion detection materials is essential. The objective of this study was to improve the electrochemical detection performance of laser-induced graphene (LIG) for Pb(II). Considering the excellent ion affinity and high activity of transition metals, Ni-Fe alloy coatings were prepared on the surface of LIG through jet electrodeposition. The prepared LIG and Ni-Fe/LIG were qualitatively analyzed through Raman spectrometry, X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The surface micromorphologies, charge transfer capabilities, and electrochemically active surface areas of LIG and Ni-Fe/LIG were characterized. The detection range and limit of detection (LOD) of Pb(II) for LIG and Ni-Fe /LIG as electrochemical sensors were analyzed. Results showed that compared with LIG, Ni-Fe/LIG had more surface active sites, a higher charge transfer capability, and a larger electrochemically active surface area that reached 0.828 cm2. Ni-Fe/LIG had a detection range of 20–1200 µg/L and an LOD of as low as 0.771 µg/L. Ni-Fe/LIG demonstrated a better electrochemical detection performance for Pb(II) than LIG when used as an electrochemical sensor.Keywords:Pb(II) detection;Ni-Fe/LIG;jet electrodeposition;electrochemical sensor
研究领域:
材料科学
·
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 29
·13985-13992
·
IF 3.3
Luo Xu,Fang Yang,Jiagen Li,Qihui Wang,Lin Du,Min Yang,Xiaohong Fu
In this work, an electrochemical sensor based on a highly efficient competitive method is proposed that uses SiO2-PNPG as an adsorbent for the efficient detection of Pb(II) in soil. The silica (SiO2) and N-phenylglycine (NPG) polymer (SiO2-PNPG), synthesized using a one-pot polymer method, was applied to construct specific metal electrochemical sensors with high sensitivity. The high sensitivity and good selectivity were accomplished in the determination of Pb(II) due to the selective penetration and accumulative effect of SiO2-PNPG. The correlation between the current response and the Pb(II) concentration presents a linear range from 2.12 to 15.78 μg mL−1 with a detection limit of 0.166 μg mL−1 (S/N = 3, R2 = 0.9987). The sensitivity, reproducibility and stability of this sensor are promoted due to the facilitated electron transfer.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ELECTROANALYSIS
·
2019
·Vol. 32
·期 3
·462-469
·
IF 2.691
Xiaomeng Shan,Tao Pan,Yuting Pan,Wenchang Wang,Xiaohui Chen,Xueling Shan,Zhidong Chen
In this study, a novel electrochemiluminescence (ECL) sensor for highly sensitive and selective detection of Pb(II) was developed based on Ru(bpy) 3 2+ encapsulated UiO66 metal-organic-framework (Ru(bpy) 3 2+ −UiO66 MOF) and −NH 2 group functionalized silica (NH 2 −SiO 2 ). The NH 2 −SiO 2 with large surface area provided an excellent platform for the ECL sensor. As numerous exposed carboxyl groups were present on UiO66 backbone, the Ru(bpy) 3 2+ −UiO66 could be steadily immobilized to NH 2 −SiO 2 by forming amide bonds. Meanwhile, the introduced UiO66 MOF which used for the encapsulation of Ru(bpy) 3 2+ , significantly enhanced the ECL efficiency of the proposed sensor, as it possessed a large specific surface area and porosity for the loading of Ru(bpy) 3 2+ . Moreover, a high quenching effect on ECL intensity was obtained in the presence of Pb(II) in the electrolyte. Under the optimal conditions, the quenched ECL intensity showed a good linear relationship within Pb(II) concentration in the range from 1.0×10 −6 to 1.0×10 2 μM, with a detection limit of 1.0×10 −7 μM ( S / N =3). The proposed sensor for Pb(II) detection was simple in operation, rapid in testing, stable in signal, and showed a good anti-interference ability to some other metal ions. Besides, its application for detecting Pb(II) in a real sample was also investigated here. This work provides a potential platform for metal ions detection in environmental monitoring field.
研究领域:
分析化学
·
环境科学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Fang-Fei Shi,Ling-Xin Kong,Wei-Zhun Dong,De-Zhong Cao,Gang-Jin,Ying Liang,Kun-Shan Yang
Post-modification of metal-organic framework (MOF) materials is an effective means to enhance their efficient and selective adsorption for heavy metal ions . In this article, we presented a reflection-type optical fiber surface plasmon resonance (SPR) sensor based on dual core fiber (DCF) coated with UiO-66-RSA (UiO-66-NH 2 post-modified with resorcinol aldehyde) film for the specific detection of Pb(II) in aqueous media . The composite material UiO-66-RSA exhibits stronger affinity and specificity for Pb(II) than UiO-66-NH 2 . The adsorption of Pb(II) can change the equivalent refractive index (RI) of UiO-66-RSA film, causing a regular shift in SPR spectra. Experiments have shown that the limit of detection (LOD) of the SPR Pb(II) sensor can reach 0.1 nM. Meanwhile, research has found that the SPR sensor is accompanied by temperature crosstalk of 0.356 nm/°C. Therefore, we constructed a Michelson temperature interferometer using polymer micro tips on the end face of the fiber core to achieve temperature compensation. Based on the above two sensing channels, dual parameter demodulation of Pb(II) concentration and temperature can be achieved with an error rate of less than 0.5 %. This article has potential research value in exploring the application of post modification techniques of MOF in fiber optic lead ion detection.
研究领域:
材料科学
·
光学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）