ACS Applied Optical Materials
·
2025
·
IF 3.8
Feifei Qin,Yue Cao,Chengwei Wang,Guogang Zhang,Xiaoxuan Wang,Feng Chen,Gangyi Zhu,Yongjin Wang
Nowadays, most solid-state lighting-based visible light communication (VLC) technology suffers from the color converter’s short optical bandwidth or low stability. Herein, we fabricated MAPbBr3@PbBr(OH) nanocrystals (NCs) with high optical bandwidth and water-stable properties for color conversion of VLC and a white light-emitting diode (LED) system. The sample’s characteristic photoluminescence (PL) spectrum is green emission peaked near 529 nm. As a color converter, it has a high bandwidth capacity for devices. The sample indicates internal quantum efficiency (IQE) of about 38.33% and a PL decay time of about 5.5 ns, and it can maintain its PL properties in water for over 90 days The calculated optical bandwidth is about 49.4 MHz. Its measured −3 dB bandwidth with a 405 nm laser diode can reach 25 MHz with a data rate over 50 Mbps. More interestingly, the perovskite NCs can replace the green phosphor to build a high-speed and multicolor LED, and the −3 dB bandwidth can be maintained at over 80% in this case. These features are far beyond the abilities of commercial green phosphors. Finally, we demonstrate an underwater text transmission system with a 405 nm LED, perovskite color conversion layer, and low-cost silicon-based photodetector.
研究领域:
材料科学
·
光学工程
·
通信技术
✓ 已验证
产品关联
DOI
高影响因子
Advanced Optical Materials
·
2024
·
IF 8
Zhen-Dong Lian,Bo Wang,Zhi-Sheng Wu,Hao Lin,Ting Ding,Jin-Xiao Wang,Liang-Xing Zhang,Jin-Cheng Xu,Peng Xiao,Hua Xu,Shuang-Peng Wang,Kar Wei Ng
CsPbBr 3 nanoplates (NPs) have shown great potential in diverse optoelectronic applications. Despite the wonderful luminescence properties, the inherent instability of these NPs hinders their use in practical situations. Herein, a facile water-assisted strategy is reported to synthesize highly stable blue emission CsPbBr 3 NPs encapsulated in PbBr(OH). The introduction of water directly into the reaction mixture is pivotal, as it triggers the transformation of bulk CsPbBr 3 nanocubes into 2-D CsPbBr 3 NPs within the PbBr(OH) matrix, resulting in the formation of CsPbBr 3 @PbBr(OH) microbricks. Remarkably, the water content in the reaction mixture allows the control of the number of perovskite layers in the NPs, thus enabling the emission color to be tuned from deep blue to green. The unconventional approach presented herein not only offers a cost-effective pathway to synthesize blue-emitting perovskites which are highly stable in a wide variety of polar and non-polar solvents, but also holds immense potential for propelling the advancement of high-performance LEDs and other optoelectronic devices. The findings underscore the significance of water in dictating the growth dynamics and emission characteristics of perovskite NPs, paving the way for their practical application.
研究领域:
材料科学
·
纳米技术
·
光电子学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Jie Liu,Tongxu Gu,Rui sun,Jiaojiao Sun,Jian Yin,Pengli Bai,Huancai Yin
Classical gold nanoparticle-based colorimetric immunochromatographic assay (ICA) exhibits moderate performance, limiting their application in trace detection. In this study, perovskite-MSN nanocomposites with high quantum yield (74.7 %), a narrow full width at half maximum (29.5 nm) and excellent water stability were synthesized using in situ crystallization growth and a water-assisted strategy. Carboxyl-modified perovskite-MSN nanocomposites were employed to label anti-gliadin monoclonal antibody (mAb) and construct dual-mode fluorescent ICA (FICA) for determination of gliadin in milk and beef samples. Compared to the traditional AuNP-based colorimetric ICA strips, the CsM-H-based FICA demonstrated improved sensitivity, with a limit of detection (LOD) of 3.62 ng/mL in quantitative analysis. The CsM-H-based FICA strips exhibited average recoveries ranging from 90.2 % to 110.0 %, with coefficients of variation (CVs) between 3.3 % and 7.4 % for milk and beef samples. The ultra-stable perovskite-MSN nanocomposites provided the FICA strip with excellent stability, enabling storage for up to six months at room temperature. This study highlights the advantages of CsM-H-based FICA, including its rapidity, simplicity, and cost-effectiveness, as a promising POCT biosensor.
研究领域:
材料科学
·
分析化学
·
医学诊断
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2023
·
IF 5.9
Yongfei Hu,Hao Dong,Arnauld Robert Tapa,Javad Shamsi,Javad Shabani Shayeh,Albert Trokourey,Baoshun Liu,Xiujian Zhao,Yi Xie
Halide perovskite nanomaterials have demonstrated promising potential in various fields, including photocatalysis for environmental remediation. However, perovskites’ poor stability toward water makes it difficult to use them for the photocatalytic degradation of organic pollutants in wastewater. Herein, we develop a facile and scalable NaBr-assisted room-temperature aqueous phase procedure for the synthesis of all-inorganic CsPbBr3-embedded PbBr(OH) with controlled hierarchical structures, excellent ambient stability, and strong activity for photocatalytic degradation of dyes (e.g., methyl orange and methylene blue) in simulated organic wastewater. It is exceptional that the added NaBr can complex PbBr2 to form a transparent aqueous solution, enabling the subsequent reaction with the aqueous Cs2CO3 precursor to produce CsPbBr3-embedded PbBr(OH) microflowers and microspheres. The photocatalysis shows that the CsPbBr3-embedded PbBr(OH) photocatalysts exhibit excellent photocatalytic activity for dye degradation under visible-light irradiation, which is significantly stronger than that of commercial TiO2 and some other perovskite-based materials produced using a previously reported method. The excellent stability of the CsPbBr3-embedded PbBr(OH) as a photocatalyst is verified by nine consecutive photocatalytic cycles without a noticeable drop in photodegradation efficiency. This work will shed light on the green synthesis of ultra-stable perovskite-based nanomaterials for photocatalytic degradation of organic pollutants as well as other promising water treatment technology prospects.
研究领域:
材料科学
·
环境科学
·
纳米技术
·
光催化
✓ 已验证
产品关联
DOI
高影响因子
CRYSTENGCOMM
·
2024
·
IF 2.6
Chengwei Wang,Rui Wang,Yanan Liao,Kai Liu,Qingyi Zhang,Lei Wang,Dawei Gu,Feifei Qin,Feng Chen
PbX(OH) (X=Cl, Br, I) is considered one of the effective encapsulation matrixes to improve the stability and luminescence efficiency of perovskite. Several strategies have been explored to construct perovskite@PbBr(OH) composites with high photoluminescence quantum yield. However, there is limited research on their precise growth kinetics mechanism and morphology control. Here, PbBr2 microwires (MWs) were applied to act as the lead source and serve as a skeleton frame for the growth of CH3NH3PbBr3 (MAPbBr3) MWs. The structures transition from MAPbBr3 to MAPbBr3@PbBr(OH) MWs were triggered by the synergistic effect of H2O and CH3NH3OOCCH3 (methylamine acetate, MAAc). All components and synthesis processes used in this system are explicit which allows a more in-depth exploration of the MAPbBr3@PbBr(OH) formation kinetics. The results indicate that the hydrolysis of MAAc provides OH- and partly replaces Br- ions in MAPbBr3 to form MAPbBrxAc3-x intermediate, which induces the transformation of MAPbBr3 into PbBr(OH) and until the stable MAPbBr3@PbBr(OH) microwires are formed. Based on this growth kinetics process, utilizing H2O-MAAc and extra sodium halide (NaCl, NaI) mixture can synthesize MAPbBrnX3-n@PbX(OH) (X=Cl, I) microwires successfully. Our study can open a new avenue for developing high-efficiency and high-stability fluorescent hybrid perovskites for three primary color detectors, lasing cavities, and sensors.
研究领域:
材料科学
·
化学
✓ 已验证
产品关联
DOI
高影响因子
Light-Science & Applications
·
2020
·Vol. 9
·期 1
·1-11
·
IF 13.714
Liu Kai-Kai,Liu Qian,Yang Dong-Wen,Liang Ya-Chuan,Sui Lai-Zhi,Wei Jian-Yong,Xue Guo-Wei,Zhao Wen-Bo,Wu Xue-Ying,Dong Lin,Shan Chong-Xin
Poor stability has long been one of the key issues that hinder the practical applications of lead-based halide perovskites. In this paper, the photoluminescence (PL) quantum yield (QY) of bromide-based perovskites can be increased from 2.5% to 71.54% by introducing water, and the PL QY of a sample in aqueous solution decreases minimally over 1 year. The enhanced stability and PL QY can be attributed to the water-induced methylamino lead bromide perovskite (MAPbBr 3 )@PbBr(OH). We note that this strategy is universal to MAPbBr 3 , formamidine lead bromide perovskite (FAPbBr 3 ), inorganic lead bromide perovskite (CsPbBr 3 ), etc. Light-emitting devices (LEDs) are fabricated by using the as-prepared perovskite as phosphors on a 365 nm UV chip. The luminance intensity of the LED is 9549 cd/m 2 when the driven current is 200 mA, and blemishes on the surface of glass are clearly observed under the illumination of the LEDs. This work provides a new strategy for highly stable and efficient perovskites.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Maosheng Chen,Xu Zhang,Chunhua Luo,Ruijuan Qi,Hui Peng,Hechun Lin
Waterborne polymers are advantageous in terms of cost, convenience, sustainability, and environmental friendliness. As lead halide perovskite (LHP) nanocrystals suffer from fast degradation in the presence of water, it is challenging to encapsulate LHP nanocrystals in waterborne polymers. In this work, luminescent MAPbBr3@PbBr(OH) nanocrystals were synthesized via the aqueous grinding process in the presence of 2-methyl-imidazole (2-MIM) and oleylamime (OAm). 2-MIM triggers the formation of the PbBr(OH) matrix, and OAm acts as a size-control ligand to control the size of MAPbBr3@PbBrOH particles in the nanoscale range. Highly stable waterborne luminescent inks were successfully prepared by blending MAPbBr3@PbBr(OH) nanocrystals with waterborne polymers, including poly(vinylpyrrolidone), poly(vinyl acetate), and acrylate resins. Owning to the dual protection of the polymer matrix and PbBr(OH) to LHP quantum dots (QDs), the luminescent films exhibit excellent stability to the environment under thermal and light irradiation. The ink can be used as a phosphor to fabricate down-converting green and white light-emitting diodes (LEDs). Waterborne anticounterfeiting inks suitable for screen printing were prepared via formula tuning for the anticounterfeit purpose. The anticounterfeiting luminescent patterns can be screen printed on paper, cloth, and poly(ethylene terephthalate) (PET), with encryption and decryption of information being accurately and conveniently realized by switching UV irradiation.
研究领域:
材料科学
·
光学工程
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTAL GROWTH & DESIGN
·
2025
·
IF 3.4
Kai Liu,Qingyi Zhang,Chengwei Wang,Lei Wang,Feng Chen
Organic–inorganic lead halide perovskite (MAPbX3, X = Cl, Br, I) single crystals exhibit superior optoelectrical and physical characteristics and have been developed in various optical and electrical applications. However, the poor stability against moisture and light remains the most critical demerit of perovskite materials. In this work, light- and waterproof MAPbBr3-MAPbBr3@PbBr(OH) core–shell single crystals were successfully synthesized by surface engineering-induced transformation from MAPbBr3 to MAPbBr3@PbBr(OH). In addition, an in situ electrode preparation method was developed to construct the Ag/MAPbBr3-MAPbBr3@PbBr(OH)/Ag structure during the crystal growing process. The thickness-adjustable MAPbBr3@PbBr(OH) shell can present dual shielding effects and not only sustains the MAPbBr3 single crystal core with the highest responsivity of 31 mA W1–, response time ∼47 ms, and a detection rate of 4.8 × 1011 Jones but also achieves the embedded MAPbBr3 nanocrystal with bright photoluminescence (quantum yield of 56.1%). Moreover, the similar MAPbCl3-MAPbBrnCl3–n@PbBr(OH) and MAPbI3-MAPbBrnI3–n@PbBr(OH) core–shell single crystals have been prepared, which also exhibit excellent photoresponsivity and high emission. This work provides an effective strategy for the fabrication of high-performance and environmentally stable photodetectors.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2022
·
IF 19.069
Tongtong Xuan,Shaoqiang Guo,Wenhao Bai,Tianliang Zhou,Le Wang,Rong-Jun Xie
Although tremendous efforts have been made to enhance the stability of lead halide perovskite quantum dots (PeQDs), they cannot meet the long-term requirements of photoelectric devices due to their poor reliability when attacked by multiple factors. Herein, we report ultrastable CsPbBr 3 :Sr/PbBr(OH)/molecular sieve composites with a high photoluminescence quantum yield of 75% and high overall stability when exposed to water, blue light and heat, owing to (i) the increased formation energy of CsPbBr 3 PeQDs by Sr doping and (ii) good encapsulation by PbBr(OH) and molecular sieves. These composites maintain 54% of their initial intensity after being aged at 85 °C and 150 mW cm −2 for 720 min, which is superior to commercial green CdSe-based QDs. These promising composites are then used to produce Mini-LED backlights with a high luminous efficacy of 86 lm/W and a color area of ~124% of the National Television Standards Committee or 93% of the Rec. 2020 standards by combining them with red CdSe/CdS/ZnS QDs and a blue Mini-LED chip. We believe that highly reliable PeQDs can be achieved by building well-designed composite structures, thus enabling them to be practically applied in emerging lighting and displays.
研究领域:
材料科学
·
光电技术
·
显示技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）