Investigation of the role of Nb on Pd−Zr−Zn catalyst in methanol steam reforming for hydrogen production
Methanol steam reforming is regarded as a very promising process to generate H 2 suitable for fuel cells. Typically, the Pd-based catalysts can catalyze efficiently methanol steam reforming for hydrogen production . But their high selectivity to CO, a byproduct of methanol reforming reaction , severely limits their potential application. In this work, a series of Nb-modified Pd−Zr−Zn catalysts with different Nb loadings were prepared to study their catalytic activities with more focus on the role of Nb on Pd−Zr−Zn catalyst for methanol steam reforming. The prepared catalysts were fully analyzed by using various characterization techniques, for example, ICP , BET, SEM, XRD , H 2 -TPR, NH 3 -TPD, HRTEM , CO chemisorption , XPS, and Raman. The experimental results showed that an increase in Nb loading for the Nb-modified Pd−Zr−Zn catalysts led to a decrease of the methanol conversion and H 2 production rate. This was probably due to the decrease in the amount of oxygen vacancies on the catalyst surface . However, introduction of Nb into Pd−Zr−Zn catalyst increased the acid strength on the catalytic surface. The aldehyde species derived from methanol decomposition were readily transformed to HCOOH, thus yielding high selectivity to CO 2 for the Nb-modified Pd−Zr−Zn catalysts. Significantly, the addition of Nb to Pd−Zr−Zn catalyst facilitated the incorporation of Pd into the ZnO lattices, which led to the formation of Pd−Zn alloy. Consequently, the Nb-modified Pd−Zr−Zn catalysts exhibited significantly lower CO selectivity and production rate than the Pd−Zr−Zn catalyst. From the results, this work offers a new way to the rational design of selective methanol steam reforming catalysts to decrease the formation of byproduct CO.
危险品化学品经营许可证（带存储）