A bimetallic polycrystalline sensor (Cr/Fe-SNCM) having nanosized and high dispersion was designed and used for the electrochemical simultaneous determination of dopamine (DA) and uric acid (UA). Catalytic nanosized Cr/Fe were highly anchored on N/S/O-contained porous carbon with high dispersion and polycrystalline Cr/Fe via energetic mechanochemical method and high-temperature carbonization. The obtained Cr/Fe-SNCM exhibited high graphitized carbon supporter and endowed high electron transport and signal output for the whole sensor. Moreover, highly dispersed Cr/Fe sites and the polycrystalline form (metal-N/S/O) efficiently enhanced the catalytic reaction, leading to a limits of detection (based on the 3σ/m criterion) of 25.8 and 22.5 nM for DA and UA, respectively. This is 1–2 orders of magnitude lower than many state-of-the-art reported sensors. The Cr/Fe-SNCM 1.0 sensor exhibited wide working range (0.1 to 10.0 μM), high recovery (96–103%) and low relative standard deviation (RSD = 3.2–4.7%) for DA and UA in real serum samples, possessing high significance for practical large-scale applications. Graphical abstract
Electrode (including cathode and anode) /electrolyte interfaces play a vital role in determining battery performance. Especially, high-voltage lithium metal batteries (HVLMBs) with the Ni-rich layered oxide ternary cathode (NCM) can be considered a promising energy storage technology due to their outstanding energy density. However, it is still extremely challenging to address the unstable electrode/electrolyte interface and structural collapse of polycrystalline NCM at high voltage, greatly restraining its practical applications. In this work, a novel electrolyte additive, tris(2-cyanoethyl) borate (TCEB), has been used to construct the robust nitrogen (N) and boron (B)-rich protective films on single-crystal LiNi 0.6 Co 0.1 Mn 0.3 O 2 (SNCM) cathode and lithium metal anode surfaces, which could effectively mitigate parasitic reactions against electrolyte corrosion and retain the structural integrity of electrode. Remarkably, the SNCM||Li metal cell using TCEB-containing electrolyte maintains unprecedentedly superb capacity retention of 80% after 100 cycles at an ultrahigh charging voltage of 4.7 V (versus Li/Li + ). This finding provides a valuable reference to construct a stable electrode/electrolyte interface for the HVLMBs with achieving high-energy density.
危险品化学品经营许可证（带存储）