Summary Doping is an important technique for semiconductor materials, yet effective and controllable doping of organic-inorganic halide perovskites is still a challenge. Here, we present a protocol to dope 2D perovskite (PEA) 2 SnI 4 by incorporating SnI 4 in the precursor solutions. We detail steps for preparation of field-effect transistors (FETs) and thermoelectric devices (TEs) based on SnI 4 -doped (PEA) 2 SnI 4 films. We further describe characterization via conductivity measurement using the four-point probe method, FETs performance, and TEs performance measurements. For complete details on the use and execution of this protocol, please refer to Liu et al. (2022). 1
Despite lithium-argyrodite electrolytes have attracted great attention due to the high ionic conductivity and relatively lower cost, their applications are hindered by the inferior air stability and poor Li compatibility. Herein, we report a Sn/I co-doping the Li 6 PS 5 Cl strategy to overcome above obstacles. The optimized LPSC-0.05SnI 4 exhibits high ionic conductivity of 3.9 × 10 −3 S cm −1 at room temperature, and improved air stability. More importantly, an in situ formed LiI-rich interface on the lithium anode is introduced through the LPSC-0.05SnI 4 . As a result, the Li/LPSC-0.05SnI 4 /Li symmetric batteries deliver high critical current density of 1.45 mA cm −2 and a remarkable steady Li plating/stripping performance over 6000 h at 0.1 mA cm −2 . The assembled LNO@NMC811/LPSC-0.05SnI 4 /Li all-solid-state batteries display prominent capacity and cycling stability. This work provides a practical and effective method for designing versatile and high-performance sulfide-based solid electrolytes .