SENSORS AND ACTUATORS B-CHEMICAL
·
2025
·
IF 7.7
Ao Zhang,Yan Zhang,Weihua Cheng,Xinran Li,Kai Chen,Fangjie Li,Dongye Yang
This study presents a novel strategy for the rapid detection of hydrogen and ammonia gases through the synthesis of a composite material that integrates SnO 2 and TiO 2 into an n-n heterostructure on the surface of two-dimensional layered Ti 3 C 2 Tx MXene. The incorporation of Pd nanoparticles significantly enhances the sensor's adsorption and sensing capabilities, particularly for hydrogen. The resulting dual-gas sensor demonstrates a pronounced linear response to hydrogen with a low detection limit of 200 ppb, along with rapid response times, excellent repeatability and long-term stability. Leveraging MXene's superior ammonia adsorption properties, the sensor also exhibits commendable linearity and robustness in detecting ammonia, with strong resistance to humidity-induced interference. To further improve the sensor's performance, machine learning techniques such as support vector machine (SVM) and artificial neural network (ANN) are incorporated, substantially enhancing the sensor's selectivity and sensitivity of the detection. These advancement enables the precise identification and quantification of complex gas mixtures containing hydrogen and ammonia. The sensor’s meticulously designed circuitry operates in real-time sensing mode, ensuring accurate differentiation between the two gases. This research establishes a robust foundation for the development of advanced gas sensing technology, showcasing its potential for multi-gas detection and analysis across diverse industrial and environmental applications.
研究领域:
材料科学
·
传感器技术
·
人工智能
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2022
·
IF 4.644
Honglan Huang,Shengzhe Zhao,Yi Yang,Yan Wang,Ran Lu,Yun Lu,Jinju Chen
Axially wrinkled SnO 2 /TiO 2 heteronanotubes have been successfully prepared by sacrificial template method combined with hydrothermal synthesis. The special folded morphology of SnO 2 /TiO 2 nanostructures may provide more active sites, and the S-scheme heterojunction between SnO 2 and TiO 2 enhances the separation of photogenerated electron-hole pairs, which are conducive to the improvement of photocatalytic degradation for organic pollutants. Using SnO 2 /TiO 2 nanotubes as catalyst, the removal rate of Rhodamine B (RhB), methyl orange (MO) and tetracycline hydrochloride (TCH) under the irradiation of a xenon lamp is 93%, 91% and 85%, respectively. After five cycles, the removal efficiency of organic pollutants maintains almost unchanged, indicating that the synthesized SnO 2 /TiO 2 nanotubes has good stability and reusability. In addition, trapping experiments have been carried out to investigate the major reactive oxidative species for organic pollutants photodegradation. This study provides a facile avenue to design nanotublar photocatalysts with enhanced degradation performance for organic pollutants.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2021
·
IF 4.464
Peng Wang,Cong Xie,Tong Song,Ping Yang
Amorphous SnO 2 was coupled on the surface of mixed-phase TiO 2 nanoflowers (NFs) by a solvothermal synthesis. Various characteristics confirms the formation of SnO 2 /TiO 2 heterostructures. As-prepared amorphous SnO 2 /TiO 2 heterostructures revealed uniform morphology and enhanced photoelectrochemical performance. Underfull-spectrum light irradiation, the SnO 2 /TiO 2 heterostructures with an optimized SnO 2 ratio revealed the best photoreduction performance, in which Cr(VI) of 99% was removed within 30 min. This is ascribed to the introduction of amorphous SnO 2 , which adjusted the band gap structure, increased specific surface area of TiO 2 NFs, and greatly enhanced the photoelectric conversion efficiency. The mechanism of the heterostructure formation and enhanced photoreduction for Cr(VI) ions were discussed. The TiO 2 NFs with a mixture phase helps to improve the separation efficiency of photogenerated carriers. This result provides an unique idea for the construction of heterostructures.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Kun Wei,Xiu Yun Gu,En Zi Chen,You Qing Wang,Zhe Dai,Zi Ran Zhu,Shi Qiang Kang,Ao Chen Wang,Xiu Ping Gao,Geng Zhi Sun,Xiao Jun Pan,Jin Yuan Zhou,Er Qing Xie
SnO 2 /TiO 2 type II heterojunctions are often introduced to enhance the separation efficiency of photogenerated carriers in photoelectrochemical electrodes, while most of these heterojunctions are of core–shell structure, which often limits the synergistic effect from the two components. In this work, dissymmetric SnO 2 /TiO 2 side-by-side bi-component nanofibers (SBNFs) with tunable composition ratios have been prepared by a novel needleless electrospinning technique with two V-shape connected conductive channels (V-channel electrospinning). Results show that this V-channel electrospinning technique is more stable, controllable and tunable for the large-scale preparation of SBNF materials compared to the traditional electrospinning using two side-by-side metal needles. And these SnO 2 /TiO 2 SBNFs are dissymmetric and comprised of a tiny SnO 2 NF (tunable diameter within 20–80 nm) and a Sn-doped TiO 2 NF (diameter of ~ 250 nm) with a side-by-side structure. Moreover, the dye-sensitized solar cells (DSSCs) based these dissymmetric SnO 2 /TiO 2 SBNFs show the maximum power conversion efficiency (PCE) of 8.3%, which is 2.59 times that of the ones based on the TiO 2 NFs. Series of analyses indicate that the enhancements in PCE could mainly be due to the improved electron transport via SnO 2 NFs and the enhanced carrier separation via dissymmetric SnO 2 /TiO 2 heterojunction interface. This research will give some new insight in the preparation of SBNFs for high-performance photoelectrochemical devices.
研究领域:
材料科学
·
能源技术
·
光电化学
✓ 已验证
DOI
高影响因子
MATERIALS TECHNOLOGY
·
2015
·
IF 1.227
Z. L. Zhang,M. L. Wang,Y. L. Mao
In this paper, heterojunction semiconductors of Sb-SnO2/TiO2 were prepared with varying molar ratios of Sb-SnO2 to TiO2. The separation efficiency of the photogenerated carriers was characterised by the surface photovoltage (SPV) technique, and the trap density was measured by an electrochemical method. The trap density was measured to be 7·48×1016, 6·01×1016, 5·43×1016, and 6·61×1016 cm−2 for TiO2 and Sb-SnO2/TiO2 films with molar ratios of 1, 2, and 3%, respectively. The SPV enhancement was estimated to be 1, 1·36, 7·64, and 6·36 for TiO2 and Sb-SnO2/TiO2 films with molar ratios of 1, 2, and 3%, respectively. The results indicate that SPV enhancement increases with decreasing trap density, which demonstrates that the trap density is an important factor affecting the separation efficiency of photogenerated carriers in heterojunction semiconductors.
研究领域:
材料科学
·
半导体物理
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Weining Liu,Xi Tan,Mingyang Zhao,Zhao Liu,Hairong Li
Triethylamine (TEA) is a highly toxic and flammable volatile organic compound (VOC) that poses serious risks to both human health and environmental safety. Thus, the development of highly sensitive gas sensors for its trace-level detection is of pressing importance. In this work, SnO 2 /TiO 2 heterostructures were synthesized via an in-situ thermal transformation of Sn-MOF/MXene precursors. The derived materials benefit from the inherent high porosity and large specific surface area of MOF-based frameworks, as well as the tightly coupled heterointerface formed under the modulation of MXene, efficiently facilitating charge separation and transport, while TEA interacts more readily with active sites due to the richness of surface defects, thereby greatly boosting TEA adsorption and sensing response. The optimized MST-2 sensor exhibits an ultrahigh response of 3525.2 to 10 ppm TEA at a notably low operating temperature of 61 °C, along with excellent selectivity and good stability. Even at an ultralow TEA concentration of 10 ppb, the sensor maintains a strong response of 44.6. Furthermore, the adsorption characteristics of individual phases, interfacial charge transfer processes, and TEA adsorption enhanced mechanisms were systematically examined through density functional theory (DFT) calculations. The effective MOF/MXene-derived co-construction strategy offers a promising avenue for designing advanced TEA sensing materials.
研究领域:
材料科学
·
纳米技术
·
传感器
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）