Forming SnS@C/MoS2 nanotubes with high specific surface area via self-sacrificing template method as superior performance anode for lithium-ion batteries
A carbon layer usually covers the outside of SnS/MoS2 nanosheets produced by a traditional C-layer cladding process, resulting in a material with a lower specific surface area and fewer active sites. Therefore, it is difficult for these as-obtained SnS and MoS2 materials to be directly employed as electrode materials. There is a great need to develop a new C-layer coating process that can effectively coat active materials and simultaneously increase the specific surface area. In this study, novel SnS@C/MoS2 nanotubes were designed and synthesized by a self-sacrificing template method (SSTM). Specifically, MoO3 nanoribbons were first coated with Sn to produce Sn-MOF, and SnS@C/MoS2 nanotubes with a particular nanosheet architecture preserved were achieved via an elegant SSTM vulcanization strategy. This SSTM preparation method not only retains the nanosheet microstructure of the surface but also leaves a thin layer of amorphous carbon on the surface, which greatly improves the conductivity and effectively improves the cycling stability. In addition to above-mentioned advantages, there is a synergistic effect between the various components of the SnS@C/MoS2 nanotubes, which has a positive effect on the electrochemical performance. When used as the anode of a lithium-ion battery (LIB), the SnS@C/MoS2 composite can maintain a specific discharge capacity of 970.9 mAh g−1 after 500 cycles at a current density of 1 A g−1, and a specific discharge capacity of 778.1 mAh g−1 even after 1000 cycles at a current density of 2 A g−1. This method provides a reference for the synthesis of other nanostructured materials.
危险品化学品经营许可证（带存储）