Journal of Materials Chemistry C
·
2019
·Vol. 7
·期 26
·8070-8078
·
IF 6.641
Yu Zhou,Yun-Ling Yang,Yu-Ting Fan,Woochul Yang,Wei-Bin Zhang,Jian-Feng Hu,Zhi-Jun Zhang,Jing-Tai Zhao
A series of novel red emitting Mn2+-activated SrZnSO phosphors were successfully synthesized by solid-state reaction at high temperature. The photoluminescence (PL) and mechanoluminescence (ML) properties of these Mn2+-activated SrZnSO phosphors with different Mn2+ concentrations were investigated. With increasing the concentration of Mn2+ from x = 0 to 0.04, the unit cell volume increased from 153.82 to 154.19 Å3 while the optical band gap decreased from 3.74 to 3.43 eV. The site occupation of Mn2+ in the host lattice was demonstrated by Rietveld refinement, the electron paramagnetic resonance (EPR) spectrum, and the spectroscopic properties. A broad band emission peak at 603 nm of SrZn1−xMnxSO (0.001 ≤ x ≤ 0.04) with an excitation wavelength of 318 nm was attributed to electronic transitions of Mn2+ from the 4T1(4G) level to the 6A1(6S) level. The lifetime of SrZn1−xMnxSO (0.001 ≤ x ≤ 0.04) decreased monotonously from 2.97 to 0.82 ms with increasing Mn2+ concentration. In particular, intense emission of red light from SrZn1−xMnxSO (0.001 ≤ x ≤ 0.04) under compressive load could be observed even with the naked eye, indicating that SrZn1−xMnxSO could be used for stress sensors or stress imaging. There was a linear correlation between the ML intensity and external load in SrZn1−xMnxSO, and the ML intensity could be recovered under UV light irradiation. Considering its advantages of non-destruction, reproducibility, and high ML intensity, SrZn1−xMnxSO might be useful for non-destructive detection of stress.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Xiaolei Zhu,Xiaoping Wang,Xianke Sun
Bi 3+ /Tb 3+ /Mn 2+ -activated SrZnSO phosphors were prepared to investigate their luminescence characteristics. The SrZnSO:Bi 3+ , SrZnSO:Mn 2+ and SrZnSO:Tb 3+ phosphors, excited by the NUV/blue light, show blue, orange and green emissions, respectively. The Bi 3+ → Tb 3+ , Tb 3+ → Mn 2+ and Bi 3+ → Mn 2+ energy transfer processes take place in Bi 3+ /Tb 3+ -, Tb 3+ /Mn 2+ -, Bi 3+ /Mn 2+ - and Bi 3+ /Tb 3+ /Mn 2+ -activated SrZnSO phosphors, which result in tunable luminescence of these phosphors. The CIE coordinates were calculated on the basis of the emission spectra, and they reflect the emission color changes of phosphors. For the Bi 3+ /Tb 3+ -, Tb 3+ /Mn 2+ - and Bi 3+ /Mn 2+ - activated SrZnSO phosphors, the emission points are located in the cyan, yellow and white light regions, respectively. For the Bi 3+ /Tb 3+ /Mn 2+ -activated SrZnSO phosphors, the light is in warm white light region.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
Electronic Materials Letters
·
2025
·
IF 2.6
Zhang Ligang,Xu Xiaoming,Ma Lihong,Wang Haosen
A series of Er 3+ /Eu 2+ -activated SrS/SrZnSO with different Er 3+ /Eu 2+ concentrations were synthesized at 1300℃ for 3 h through high temperature solid-state reaction, and their persistence luminescence and mechanoluminescence properties were studied. Upon 450 nm laser excitation, SrS/SrZnSO:Er 3+ /Eu 2+ emitted orange-red light, which could be observed with the naked eyes. When the laser was removed, it showed long afterglow orange-red luminescence. The brightness and duration of the long afterglow increase with the increase concentration of Er 3+ /Eu 2+ from x:y = 0.5%:1% to 3%:1%. SrS/SrZnSO:Er 3+ /Eu 2+ was confirmed as an excellent persistent luminescence material since it could continuously emit light for nearly 10 min. Moreover, under pressure stimulation SrS/SrZnSO:Er 3+ /Eu 2+ showed a novel type of mechanoluminescence (ML) with the emitting bright green light which linearly depended on the force. Under the same force of friction, the sample SrS/SrZnSO:Er 3+ /Eu 2+ with Er 3+ /Eu 3 = 1%:0% emitted the strongest ML among prepared samples. Furthermore, the mechanism of mechanoluminescence was studied in details. This study can expand the family of ML materials while promoting the applications of mechanoluminescence materials in damage diagnosis, human-machine interfaces, and pressure sensing. Graphical
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
Nano Energy
·
2019
·
IF 15.548
Changjian Chen,Yixi Zhuang,Dong Tu,Xiandi Wang,Chaofeng Pan,Rong-Jun Xie
Mechanoluminescence (ML) materials featuring light emission in response to mechanical stimulus have shown promising applications in damage diagnosis, dynamic force detection, and information storage. However, their applications are greatly limited by a very small number of available ML materials as well as unsatisfied ML spectra. In this paper, we developed novel ML materials with intense ML and super-broad visible-to-near-infrared (470–1600 nm) spectra by incorporating lanthanide ions or transition metals into mixed-anion compounds SrZn 2 S 2 O and SrZnSO. These mixed-anion compounds show a linear relationship between ML intensity and applied force, allowing them to be used in non-contact/multi-touch stress sensing. Moreover, the mixed-anion compounds exhibit multiband near-infrared ML enabling a significant bright-field stress sensing approach without the interference of ambient light. This work offers a unique insight for discovering new ML materials and enriching the ML spectral range , thereby promoting their potential applications in stress intelligent sensors, electronic skins, and human-machine interfaces.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2022
·
IF 5.436
Yun-Ling Yang,Ting Li,Fan Guo,Jia-Yong Yuan,Chong-Hao Zhang,Yu Zhou,Qian-Li Li,Dong-Yun Wan,Jing-Tai Zhao,Zhi-Jun Zhang
Mechanoluminescence materials that emit light under mechanical stimulation have attracted widespread attention in sensing, anticounterfeiting, and imaging applications. In this study, a series of Sr1–xBixZnSO (0.001 ≤ x ≤ 0.1) samples was synthesized by the method of high temperature solid-state reaction. It is worth noting that the distortion degree of the SrO3S3 octahedron was increased with increasing Bi3+ concentration, and the color manipulated Sr1–xBixZnSO which can emit different photoluminescence (blue to dark blue and finally red) and mechanoluminescence (orange to red) colors is obtained. Moreover, the deep traps can stably store and provide electronic supplements in shallow traps released under mechanical stimulation. Therefore, devices made of SrZnSO:Bi3+ phosphor and polydimethylsiloxane (PDMS) can be used as thermo-mechano-opto three-mode anticounterfeiting. The ML intensity is linear to the external load and can be utilized for stress sensing or imaging.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子