Lithium Extraction from Salt Lake Brine with High Mass Ratio of Mg/Li Using TBP-DIBK Extraction System
Lithium extraction from salt lake brine with a high mass ratio of Mg/Li by counter-current method using TBP-DIBK extraction system was investigated in this study. In the extraction process, TBP and DIBK acted as extractant, kerosene was used as diluent, and FeCl3was used as co-extractant. The operation conditions of extraction, scrubbing, stripping, and regeneration were investigated. In this study, 5.5 mol/L LiCl + 0.5 mol/L HCl was used as a scrubbing solution for purifying products, and 6 mol/L HCl solution was used as a stripping agent to transfer Li+from organic phase to aqueous phase. Furthermore, 2 mol/L NaOH and saturated MgCl2were used as the regeneration agent to remove H+from organic phase. The counter-current extraction experiments of 3-1-1-3 stages were carried out. After 10 cycles, the lithium extraction efficiency reached 99.90%; the separation factor of Li/Mg, Li/K, Li/Na, and Li/Ca was 5.215 × 104, 2.159 × 103, 3.659 × 102, and 3.104 × 102, respectively. The results indicated that the TBP-DIBK extraction system was effective at extracting lithium from salt lake brine with a high mass ratio of Mg/Li. Furthermore, the study of extraction thermodynamics suggested that lithium extraction was an exothermic process and that lower temperature promoted lithium extraction.Keywords:lithium extraction;salt lake brine;TBP-DIBK;extraction thermodynamics
危险品化学品经营许可证（带存储）