TALANTA
·
2025
·
IF 6.1
Mengting Liu,Zuncai Gu,Lu Qian,Kawtar Ettayri,Tao Deng,Chenhao Zhang,Jing Qian,Xingyi Huang,Chengquan Wang
Oxytetracycline (OTC), a broad class of antibacterial medication, has been widely utilized in poultry husbandry and fish farming. However, the presence of OTC residues in the food has become a matter of great concern. These residues have the potential to induce the emergence and spread of bacterial resistance, which can have far-reaching consequences for public health. In this work, we focused on the comparison of the quenching efficiency of UiO-66 and its amino group-modified counterpart UiO-66-NH 2 , towards the fluorescence of nitrogen-doped graphene quantum dots (NGQDs) labeled aptamer (NGQDs-apt). It was found that UiO-66-NH 2 demonstrated a more potent fluorescence quenching ability towards NGQDs-apt, as high as 98.8 %, compared to 69.7 % for UiO-66 without amino functionalization. This enhanced performance is attributed to the improved interaction between the amino groups on UiO-66-NH 2 and the NGQDs-apt, facilitating more effective electron transfer. Consequently, UiO-66-NH 2 was selected as the optimal quencher for the development of a highly sensitive aptasensor. This aptasensor demonstrates a quantitative detection range for OTC spanning from 0.001 to 200 μM with an exceptionally low detection limit of 0.25 nM, showing simplicity, accuracy, stability and great potential for antibiotic residue detection in food samples. This work addresses the urgent need to develop reliable methods for detecting OTC residues in food due to the potential of OTC to trigger bacterial resistance, which is crucial for food safety and public health.
研究领域:
生物传感
·
食品安全
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
WATER AIR AND SOIL POLLUTION
·
2021
·Vol. 232
·期 7
·1-15
·
IF 2.52
Wang Leiping,Dai Xiaorong,Man Zun,Li Jianrong,Jiang Yifeng,Liu Dezhao,Xiao Hang,Shah Sanjay
Concentrated pig production is a major source of environmental pollution. Metal–organic frameworks (MOFs) show potential for reducing heavy metal pollution. Two zirconium-based octahedral MOFs, UiO-66 and UiO-66-NH 2 , were prepared by solvothermal method and were characterized by XRD, SEM, FT-IR, and BET. The adsorption capacity, treatability, and reusability of the adsorbents were tested in batch experiments. The optimum adsorbent dosage was 4 g/L, and the maximum removal rates at room temperature of chromium (Cr), manganese (Mn), iron (Fe), nickel (Ni), and Arsenic (As) on UiO-66 were 76.93%, 93.73%, 88.81%, 83.30%, and 86.11%, respectively. In the kinetic experiments, the adsorption process achieved equilibrium within 90 min and generally conformed to the quasi-second kinetics model. The results demonstrated that UiO-66 and UiO-66-NH 2 can be used over a wide range of pH for removal of most HMs on a large scale. Meanwhile, the adsorbents maintained excellent adsorption capacity after at least 3 cycles. Overall, UiO-66 and UiO-66-NH 2 have a high potential for practical application on the recovery of heavy metals in the complex wastewater from animal farms.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2021
·Vol. 45
·期 32
·14822-14830
·
IF 3.591
Victor Charles,Yong Yang,Menglei Yuan,Jitao Zhang,Yaling Li,Jingxian Zhang,Tongkun Zhao,Zhanjun Liu,Bin Li,Guangjin Zhang
The water oxidation reaction involves a four electron–proton coupled process that is kinetically sluggish and has hindered the widespread application of water-splitting technology. Metal-MOF-coupled heterostructures serve as good OER electrocatalysts due to their endowed MOF frameworks and numerous transition metal active sites at the interface. In this study, a simple ultrasonic impregnation strategy was used to prepare CoOx/UiO-66-300 and NiO/UiO-66-300 heterostructures via the impregnation of Co and Ni ions into UiO-66 followed by roasting in air at 300 °C to obtain heterostructures with UiO-66-retained frameworks as revealed by SEM. The electrochemical results show that the respective impregnation successfully modulated the electronic charge at the interface of the heterostructures, leading to rapid electron transfer that enhanced the OER activity. CoOx/UiO-66-300 and NiO/UiO-66-300 heterostructures showed good oxygen evolution reaction activities of 283 mV and 291.6 mV, respectively, due to the retained UiO-66 framework, while CoOx/UiO-66-550 and NiO/UiO-66-550 heterostructures calcined at 550 °C showed a decrease in OER activities of 332.6 mV and 346.6 mV, respectively, due to the collapsed UiO-66 framework. This work gives insight into the development of heterostructures of MOF-retained frameworks for energy applications.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2024
·
IF 6.5
Jiaxuan Zhou,Zhitao Wang,Ran Liu,Kai Qi,Yubing Qiu,Xingpeng Guo
Fabricating metal-organic frameworks (MOFs) membranes directly onto metal surfaces as anticorrosive coatings is a feasible approach for the application of MOFs in corrosion protection . The MOFs membranes with specific organic groups can be further customized as versatile platforms for developing various functional coatings. Herein, UiO-66 and UiO-66-NH 2 membranes are synthesized onto aluminum surfaces through a polydopamine-assisted method, which are then grafted with superhydrophobic molecules of perfluorodecyltriethoxysilane (PFDTES). The -COOH groups in UiO-66 and -COOH/-NH 2 groups in UiO-66-NH 2 can serve as firm anchor sites for covalently grafting with PFDTES, enabling robust superhydrophobicity of the as-prepared coatings. The superhydrophobic surfaces exhibit water repellency (water contact angle of ∼165 o ), chemical (pH and salinity) and wear-resisting robustness, and long-term service durability. They also perform decent anti-fouling, self-cleaning, and anti-icing properties. Notably, sustainable corrosion protection can be provided by both coatings during immersion in saline solution (3.5 wt% NaCl) for one month and during a two-week salt spray test. Compared with UiO-66, the -NH 2 groups on UiO-66-NH 2 as extra grafting sites for firmer immobilization of more PFDTES molecules facilitate more durable superhydrophobicity and corrosion protection. We believe that this work could offer valuable insights into the multi-functional development of MOFs membranes-based coatings.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2021
·Vol. 50
·期 17
·5943-5950
·
IF 4.39
Lu Feng,Jirong Lan,Fangyuan Chen,Haobo Hou,Hong Zhou
Metal–organic frameworks (MOFs), as a new class of proton conductors, have attracted much attention in the application of proton exchange membranes due to their precisely defined structure and tailorable functionality. However, for most of the MOF materials, their long-term stability is a huge barrier to practical application. Therefore, the structural stability of MOFs is an important prerequisite for the design and development of proton conductors with ultra-high conductivity. In this study, the stable UiO-66-NH2 is optimized as the precursor, and the modified material of DT-UiO-66 is designed and developed by introducing the 3,5-diamino-1,2,4-triazole molecule into the framework of UiO-66-NH2 through a post-synthesis strategy. Satisfactorily, DT-UiO-66 maintains the stability of the original skeleton. The alternating current impedance measurements indicate that a significantly improved proton conductivity of 4.47 × 10−3 S cm−1 is obtained at 100% relative humidity (RH) and 373 K for DT-UiO-66, which is attributed to the increasing number of proton sources and hopping sites. Moreover, DT-UIO-66 shows an outstanding stability under high temperature and high humidity conditions for at least 16 h, suggesting its potential application as a proton exchange membrane.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Particuology
·
2021
·
IF 3.067
Jinbo Ouyang,Jian Chen,Shaoqing Ma,Xiaohong Xing,Limin Zhou,Zhirong Liu,Chuntao Zhang
The adsorption removal of anti-inflammatory drugs from water by diverse materials has drawn great attention. This study investigated the adsorption of sulfamethoxazole (SMX) by two types of materials, UiO-66 and UiO-66-BC composites. Highly porous MOF composites with functional groups were synthesized by combining UiO-66 with corncob-based biochar at different molar ratios. SEM results showed that macroporosity of UiO-66-BC composites was increased by increasing the ratio of biochar. It was found that UiO-66-BC composites displayed highly improved adsorption performance of SMX relative to pristine UiO-66. UiO-66-BC (5%) had the highest SMX adsorption capacity, about 2.4 times those of pristine UiO-66. It was the high surface area of UiO-66 and redundant functional groups of biochar that increased the adsorption performance of composites. Moreover, UiO-66-BC can be reused and displayed the competitive adsorption efficiency after successive adsorption, which made it a potential adsorbent for the removal of SMX from water.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2019
·Vol. 26
·期 6
·1831-1838
·
IF 1.947
Mutyala Suresh,Yu Ya-Dong,Jin Wei-Guang,Wang Zhi-Shuo,Zheng Deng-Yue,Ye Chun-Rong,Luo Binbin
Composite material, tetraethylenepentamine (TEPA) incorporated UiO-66 was prepared by impregnation method to study CO 2 capture in a fixed bed reactor, atmospheric pressure. All synthesized adsorbents were characterized using PXRD, N 2 adsorption–desorption isotherms, FT-IR, TGA, SEM, and Elemental analysis. Characterization results have revealed that incorporated TEPA was present within pores of UiO-66. CO 2 adsorption was higher on TEPA incorporated UiO-66 compared to UiO-66. It was due to the chemical interaction between –NH 2 and CO 2 . High CO 2 adsorption capacity 3.70 mmol g −1 was obtained on 30TEPA/UiO-66 at 75 °C, 1 bar. Because of more flexibility and high dispersive nature of TEPA at this temperature. The same CO 2 adsorption capacity was obtained in each adsorption cycle without decomposition of the amine on 30TEPA/UiO-66. Avrami adsorption kinetic model has suggested adsorption of CO 2 on composite material was chemical adsorption and deactivation model suggested an initial rate of adsorption was higher on TEPA incorporated UiO-66.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2021
·
IF 3.171
Mengge Shang,Jing Zhang,Jinqiang Sun,Shimo Yu,Feng Hua,Xiaoxu Xuan,Xun Sun,Serguei Filatov,Xibin Yi
A mesoporous UiO-66-NH 2 aerogel is prepared via a straightforward sol–gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH 2 aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO 2 adsorption. For ulteriorly investigating the effect of amine loading on the CO 2 adsorption ability, a series of UiO-66-NH 2 aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO 2 adsorption capacity reaches the optimum value of 2.13 mmol·g −1 at 25 °C and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH 2 -1.45 aerogel also has noticeable CO 2 selectivity against N 2 and CH 4 as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO 2 adsorption, and also contains the potential to be applied in catalysis, separation and other fields.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY
·
2020
·
IF 4.872
Sumei Li,Fan Feng,Sha Chen,Xiaolei Zhang,Yixuan Liang,Saisai Shan
MOFs are usually used as efficient adsorbents to remove specific pollutants in water. However, because of their poor water stability relatively small particle size, their application in adsorbing and removing pollutants from water is limited. In this paper, with nitrile rubber sponge as the substrate, UiO-66-NH 2 /sponge composites were firstly in-situ synthesized and systematically evaluated UiO-66-NH 2 as an adsorbent to remove 2,4-dichlorophenoxyacetic acid from water. This composite could not only remain the adsorption capacity for 2,4-dichlorophenoxyacetic acid of UiO-66-NH 2 , but also was much more convenient for separation after the adsorption compared to UiO-66-NH 2 . In addition, the mechanism of the adsorption of UiO-66-NH 2 for 2,4-dichlorophenoxyacetic acid were discussed in detail. Electrostatic interaction between UiO-66-NH 2 and 2,4-dichlorophenoxyacetic acid was the main adsorption mechanism. The adsorption was mainly suitable for Langmuir isotherm models, and its maximum adsorption capacity of 2,4-dichlorophenoxyacetic acid was 72.99 mg g −1 .
研究领域:
环境科学
·
化学工程
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
Metals
·
2022
·Vol. 12
·期 4
·579
·
IF 2.695
Wanyi Zeng,Lei Xu,Qiongling Wang,Chen Chen,Minglai Fu
Considering environmental friendliness and economic factors, the separation and extraction of indium under acidic conditions are of great significance. In this research, metal-organic frameworks (MOFs) of UiO-66 were successfully prepared and used for the separation and adsorption of indium. The properties of UiO-66 were structurally characterized using powder X-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Brunauer-Emmett-Teller surface area analyzer (BET), thermogravimetric analysers (TGA) and Scanning Electron Microscope (SEM). The results show that UiO-66 can resist acid and keep its structure unchanged, even at a strong acidity of pH 1. The adsorption performance of UiO-66 to indium (III) was also evaluated. The results show that the adsorption process of indium ions was by the Langmuir adsorption isotherm, with a maximum adsorption capacity of 11.75 mg·g−1being recorded. The adsorption kinetics experiment preferably fits the second-order kinetic model. A possible mechanism for the adsorption of In(III) by UiO-66 was explored through X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared analysis(FT-IR). It was concluded that the C=O of free –COOH of UiO-66 was involved in the adsorption of In(III) by cation exchange. This study indicates, for the first time, that UiO-66 can be applied as an acid-resistant adsorbent to recover indium (III).Keywords:UiO-66;MOFs;Adsorption;Indium recovery
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Mingmin Jia,Xiong-Fei Zhang,Yicheng Zhou,Hengyang Mao,Yijiang Zhao,Jianfeng Yao
In this work, Amine-functionalized CNF/UiO-66 (CNF–NH 2 /UiO-66) composite membranes were fabricated by incorporating UiO-66 nanoparticles in the CNF–NH 2 matrix. The CO 2 -facilitated transfer channels can be constructed in the CNF–NH 2 /UiO-66 composite membrane. As a natural polymer material, CNF–NH 2 would absorb water and form a gel-like structure under humidification. The adsorbed water can convert CO 2 into bicarbonate ions (HCO 3 − ) through the catalysis of amino groups on CNF–NH 2 . Moreover, in CNF–NH 2 /UiO-66 composite membranes, HCO 3 − could quickly migrate to the permeate side promoted by the porous UiO-66, facilitating CO 2 transport. The optimum membrane gave a CO 2 permeability of 257.0 Barrer with a CO 2 /CH 4 ideal selectivity of 71.3.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Arabian Journal of Chemistry
·
2020
·
IF 4.762
Lang Wen,Xuedan Chen,Chao Chen,Ruisong Yang,Min Gong,Yiguo Zhang,Qingshan Fu
Chitosan/MOF composite porous monolith used in water remediation as adsorbent can realize high-efficient removal of pollutant in water and facile recycling from water. However, dissolution of chitosan (without crosslinking) in acidic aqueous solution will cause breakage of composite monolith. Herein, we report a chitosan/UiO-66 monolith prepared by ice-templating method. Specially, a pre-crosslinking treatment (by glutaraldehyde) is employed before the monolith formation, which obviously boosts its stability in aqueous solution. The composite monolith is evaluated by SEM, N 2 adsorption, XRD, and batch adsorption tests for Congo Red (CR). The results show that the composite monolith possesses a typical ice-templating structure with hierarchical (mirco- / meso- and macro-) pores. UiO-66 particles are embedded on the surface of chitosan matrix, and the crystal structure of UiO-66 is not changed obviously by the crosslinking and freezing process. The composite monolith exhibits high adsorption efficiency (90% of CR was removed from its aqueous solution in 60 min) and the maximum adsorption capacity of 246.21 mg/g (derived from Langmuir model) can be reached. After adsorption, the monolith is collected by a facile procedure and recovered using ethanol for evaluating its reusability. After 4 cycles, the CR removal efficiency of the composite monolith still remains ~90% of the initial efficiency. This work demonstrates that the simple crosslinking procedure before monolith formation can ensure the intact shape of the chitosan/MOF monolith during adsorption.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）