JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2016
·Vol. 27
·期 6
·6188-6192
·
IF 1.798
Wu Yeqiu,Jin Guangya,Liu Zhijian,He Tao
Y 2 O 3 :Eu 3+ and Y 2 O 3 :Eu 3+ /Bi 3+ particles with spherical morphology are synthesized by microwave-assistant hydrothermal process. The results show that cubic phase Y 2 O 3 :Eu 3+ and Y 2 O 3 :Eu 3+ /Bi 3+ particles with uniform size and spherical shape are obtained. The doping Eu 3+ and Bi 3+ ion have no influence on the phase and morphology of samples. In the hydrothermal process, the fast and homogeneous microwave heating benefits the formation of samples with uniform size and spherical shape. Both Y 2 O 3 :Eu 3+ and Y 2 O 3 :Eu 3+ /Bi 3+ show dominant red emission originating from the 5 D 0 → 7 F 2 transition of Eu 3+ . The codoping Bi 3+ can enhance the intensity of Eu 3+ emission.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Nanomaterials
·
2013
·
IF 1.547
Lijun Luo,Fenfen Hu,Li Xiong,Xiaofan Li,Meili Zhou,Zhengliang Wang
A series of red phosphors Y2O3:Eu3+ were prepared by the molten salt method with different surfactants. Their structures, morphologies, and the photoluminescent properties were investigated at room temperature. The particles size of Y2O3:Eu3+ can be controlled by adjusting the kinds of surfactants. The phosphor Y2O3:Eu3+ prepared with NP-10 [polyoxyethylene (10) nonyl phenyl ether] shows regular morphology and higher crystallinity, and its average particle size is about 200 nm. Bright red light can be observed by naked eyes from the red phosphor under 254 nm excitation.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
LUMINESCENCE
·
2021
·Vol. 37
·期 2
·348-356
·
IF 2.464
Shilin Shen,Zerong Long,Yi Lu,Jia Chen
A novel double-windows fluorescence sensor for carbofuran (CF) detection was successfully developed based on rare-earth Eu,Tb-doped Y 2 O 3 @SiO 2 -based molecularly imprinted nanoparticles (MINs) with a multilayer core-shell structure. The recognition process of the MINs for CF was fairly fast and needed only ~8 min to reach a dynamic equilibrium. Interestingly, one fluorescence attenuation window was found with an increase in CF concentration ( Q ) from 0.1 to 10 μg ml −1 and with a limit of detection (LOD) of 0.04 μg ml −1 at 544 nm belonging to the Tb 3+ emission, as well as another fluorescence enhanced window within the CF concentration range 10–100 μg ml −1 (LOD = 4 μg ml −1 ) at 617 nm of Eu 3+ emission in the dispersed rare-earth-doped MIN colloidal aqueous solution. Luminescence resonance energy transfer from CF to Eu 3+ and an inner filter effect of CF towards Tb 3+ , as well from the two independent detection windows were clearly observed simultaneously. The competition experiment displayed hardly any marked interference during detection of CF following addition of its analogues (carbaryl, isoprocarb, aldicarb, methomyl, and etofenprox). Moreover, the MINs could also be applied to accurately detect CF in rhubarb and wolfberry samples with recoveries of 85.7–92.2%. This sensing system has high specific recognition and a wide detection range for CF and provides new opportunities for pesticide detection.
研究领域:
分析化学
·
纳米技术
·
环境科学
·
农药检测
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Man Li,Yifei Zhao,Shuai Zhang,Ruirui Yang,Weidong Qiu,Pin Wang,Maxim S. Molokeev,Shi Ye
The photoinduced reversible ion exchanges in mixed halide perovskites and the resulting luminescent variations make them promising for constructing anti-counterfeiting patterns; however, its understanding in an interfacial view is lacking. In this work, nominal CsPbBr1.5Cl1.5 (CPBC) nanocrystals (NCs) were introduced into macroporous Y2O3:Eu3+ (MYE) to realize emission color variations from red emission of MYE to green emission of halide NCs. The large surface area of MYE helps the formation of Y–Cl/Br bonds which induces fluctuation in the halide composition, while water and intrinsic halogen defects have also been proved to be essential in the reversible ion segregation process. The PL variations of several samples with different pore sizes were investigated upon irradiation of light with different photon energies and excitation power at certain temperatures. According to combined results of density functional theory calculation, the research reveals the presence of two energy barriers that would be overcome correspondingly by the excitation photon and the concentration difference in the ion exchange and recovery process. A photochromic anti-counterfeiting quick response (QR) code was constructed facilely with the perovskite composites. This work provides a deeper understanding from the interfacial aspect and also proposes a feasible strategy to realize reversible PL variation for anti-counterfeiting applications.
研究领域:
材料科学
·
光学
·
纳米技术
·
防伪技术
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
·
2012
·Vol. 12
·期 3
·2767-2773
·
IF 1.563
Zou Xing,Liu Jie,Peng Yingjie,Xu Bo,Yu Xibin
Uniform Y2O3 nanorods, nanosheets, nanotubes and nanoshperes were controllably synthesized via an urea-based homogeneous precipitation and hydrothermal synthesis through choosing appropriate yttrium sources, the water/ethanol ratio of mixed solvents and precipitators.
The nanopheres and nanotubes were obtained through homogeneous precipitation method using soluble yttrium nitrate as the yttrium source. The nanosheets and nanorods were obtained via a facile hydrothermal synthetic method using yttrium chloride and yttrium acetate as the yttrium source. During
these experiments Urea and NaOH were used as precipitators and added in correct order. We also studied the spectroscopic properties of Y2O3:Eu3+ phosphor. The Eu3+ ion mainly shows its characteristic red (611 nm, 5D0 →
7F2) emissions in all kinds of morphologies Y2O3:Eu3+ phosphor, but emission intensity are different. It can be explain from the viewpoint of their different absorption properties closely related to their micro-morphologies.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF LUMINESCENCE
·
2026
·
IF 3.6
Yong Tang,Jianwei Zhao,Yi Li,Yujing Wang,Guangqiu Zhang,Yihang Zhao,Lirong Qin
In this study, we demonstrate a synergistic approach combining hydrothermal synthesis with laser annealing to fabricate Y 2 O 3 : x Eu 3+ phosphors ( x = 0.5, 1, 2, 5, 8, 10 %). When the doping concentration is 5 % Eu 3+ , the photoluminescence performance of the sample is the best, with the maximum emission intensity and a longer lifetime. The phosphor obtained by laser annealing, when excited by a 395 nm laser, emits light with a higher color purity than that obtained by traditional annealing; its thermal stability is also improved. Rietveld refinement confirms laser processing promotes preferential Eu 3+ occupation at low-symmetry C 2 sites, optimizing electric dipole transitions. Meanwhile, both Fourier transform infrared spectroscopy and absorption spectroscopy tests have proved that the performance of the laser-annealed samples is higher than that of the samples annealed in the furnace. In conclusion, laser annealing can be used as a new method for preparing high-performance rare earth luminescent materials.
✓ 已验证
产品关联
DOI
高影响因子
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
·
2023
·Vol. 220
·期 13
·2300087
·
IF 2
Zhou Zou,Dengwei Zhang,Arun Murali,Chaoyi Chen,Li Liu,Yuanpei Lan,Junshan Zhang,Fengyuan Liu,Zhiyao Chu,Deyang Ning,Junqi Li
Herein, size-controllable spherical yttrium carbonate powders with D 50 in range from 225 to 743 nm are synthesized from Y(NO 3 ) 3 ·6H 2 O and urea. With the rise of the concentration ratio of urea/Y 3+ , temperature, and extension of aging time, diameter of yttrium carbonate spheres increases. When the urea/Y 3+ is 40: 1 and ages for 4 h at 90 °C, the D 50 of synthesized powder, which has been determined as Y(OH)CO 3 ·1.3H 2 O, has the largest D 50 of 743 nm with (D 90 –D 10 )/2D 50 of 0.22. After decomposition, the D 50 of formed Y 2 O 3 decreases to 632 nm, the (D 90 –D 10 )/2D 50 is 0.24, and the D 50 of Y 2 O 3 is in the range of 126–632 nm. Then, 6 mol. % Eu 3+ is homogeneously doped into Y(OH)CO 3 ·1.3H 2 O and Y 2 O 3 : Eu 3+ spherical powder is obtained after roasting, which exhibits a strong emission peak at 613 nm. The developed synthetic method and the obtained size-controllable spherical Y(OH)CO 3 ·1.3H 2 O, Y 2 O 3 , and Y 2 O 3 : Eu 3+ with a uniform size distribution own various potential applications.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2020
·
IF 4.495
Qiang-Qiang Zhu,Peng-Fei Yang,Zai-Yang Wang,Peng-Cheng Hu
To obtain red-emitting luminescent material for high-power UV LED and UV LD applications, an additive-free Y 2 O 3 :Eu 3+ phosphor ceramic was successfully prepared in this work. The nitrate pyrogenation method is applied to obtain raw nanopowders with high reactivity, and a hybrid sintering method combining low-temperature presintering and subsequent hot isostatic pressing (HIP) is then applied to realize full densification of the final ceramic products. The effects of the presintering temperature on the density, microstructural, and optical properties are investigated in detail. The HIP-treated Y 2 O 3 :Eu 3+ ceramic presintered at 1450 °C exhibits a high transmittance near 80 % at 600 nm. Due to the nonuse of sintering additives, the thermal conductivity of Y 2 O 3 :Eu 3+ ceramic product reaches 10.9 Wm −1 K −1 at room temperature. The achieved Y 2 O 3 :Eu 3+ ceramic also exhibits good applicability under the excitation of a UV LED chip and UV laser light, showing promise as a color converter for high-power UV LED and UV LD applications.
研究领域:
材料科学
·
光电子学
·
陶瓷与玻璃
·
固态照明
·
热管理
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）