JOURNAL OF APPLIED PHYSICS
·
2024
·Vol. 135
·期 16
·
IF 2.7
Zhao Dongpeng,Li Jun,Bai Han,Wu Huantong,Chen Xiping,Sun Guangai,Zhou Zhongxiang
Consistent c -axis orientation characteristics toward the direction of applied pressure of Y -type BaSrCo 2 Fe 11 AlO 22 (BSCFAO- θ ) were successfully prepared by the strategy of hot pressing. The samples’ magnetoelectric coupling performance was greatly enhanced by the strategy of hot pressing than that of the traditional solid reaction method. The magnetoelectric current of BSCFAO- θ ( θ = 0°) (12.06 μ A/m 2 ) was nearly 5 times higher than BSCFAO- SS (2.24 μ A/m 2 ). The magnetoelectric polarization of BSCFAO- θ ( θ = 0°) (32.82 μ C/m 2 ) was nearly 4 times higher than that of BSCFAO- SS (8.31 μ C/m 2 ). The magnetoelectric coupling coefficients of BSCFAO- θ ( θ = 0°) (1880 ps/m) were nearly 4 times higher than those of BSCFAO- SS (404 ps/m). The enhancement of magnetoelectric polarization of BSCFAO- θ ( θ = 0°) can be attributed to the uniform c -axis orientation, which reinforced magnetoelectric polarization compared with none orientation that eliminated the magnetoelectric polarization on grain boundaries. The magnetoelectric coupling performance of BSCFAO- θ presented a gradually decreasing trend with the angle changing from 0° to 90° for the changing of orientation. Compared with traditional solid reaction methods, the strategy of hot pressing inhibits grain growth and increases grain boundaries, thus facilitating the enhancement of grain boundaries’ resistivity, and the electrical resistivity of BSCFAO- θ (3.08 × 10 10 Ω cm) was nearly 10 000 times higher than that of BSCFAO- SS (2.5 × 10 6 Ω cm), which also benefits the magnetoelectric polarization performance of BSCFAO- θ . Therefore, the hot-pressing strategy can contribute to the forming of oriented ceramics and enhance the grain boundaries’ resistivity to improve magnetoelectric coupling performance.
研究领域:
材料科学
·
物理学
✓ 已验证
产品关联
DOI
高影响因子
THIN SOLID FILMS
·
2013
·
IF 1.604
Shufang Wang,Shanshan Chen,Guoying Yan,Fuqiang Liu,Shouyu Dai,Jianglong Wang,Wei Yu,Guangsheng Fu
c-axis oriented nanocrystalline Bi 2 Sr 2 Co 2 O y thin films with the average grain size of 25 nm have been achieved by chemical solution deposition combined with a rapid annealing process in oxygen. The resistivity and Seebeck coefficient of the nanostructured films are about 7.0 mΩ·cm and 171 μV/K at 873 K, resulting in a power factor 2–3 times larger than that of the best reported value in the coarse-grained Bi 2 Sr 2 Co 2 O y polycrystalline bulks. Since the thermal conductivity can be greatly reduced due to the increased phonon scattering at the grain boundaries of nanocrystalline films as well as at film surface and at film/substrate interface, great improvements in the ZT are expected in the nanocrystalline Bi 2 Sr 2 Co 2 O y thin films .
研究领域:
材料科学
·
凝聚态物理
·
无机非金属材料
·
能源材料
✓ 已验证
DOI
高影响因子
ChemCatChem
·
2018
·Vol. 10
·期 24
·5619-5626
·
IF 4.674
Xing Yu,Cunhui Zhou,Xinqing Chen,Peng Gao,Minghuang Qiu,Wenjie Xue,Chengguang Yang,Hanqin Zhao,Hongjiang Liu,Ziyu Liu,Yuhan Sun
Graphical CatalyZSM-5 : Well crystallized hollow fibers assembled by c -axis oriented ZSM-5 crystals were successfully synthesized via a facile one-pot solvent-free route, using quartz fiber as silicon substrate and NH 4 HCO 3 as the growing inhibitor on the crystal faces. The obtained ZSM-5 hollow fibers gave a hierarchical structures composed by micro-, meso- and macropores exhibiting excellent performance in methanol to gasoline (MTG) reaction with higher C 5+ selectivity and longer lifetime due to the improved mass transfer inside the unique hollow fiber structure. Well crystallized hollow fibers assembled by c -axis oriented ZSM-5 crystals were successfully synthesized via a facile one-pot solvent-free route, using quartz fiber as silicon substrate and NH 4 HCO 3 as the growing inhibitor on the crystal faces. The immigration of silica inside the quartz fibers formed the hollow morphology and the shell of hollow fiber was composed by the ZSM-5 crystals. In addition, the length of c -axis of ZSM-5 could be controlled by the amount of NH 4 HCO 3 , which selectively inhibited the growth on (010) surface. The obtained ZSM-5 hollow fibers gave a hierarchical structures composed by micro-, meso- and macropores. Catalytic tests for methanol to gasoline (MTG) revealed that the resultant ZSM-5 hollow fiber exhibited excellent performance with higher C 5+ selectivity and longer lifetime due to the improved mass transfer inside the unique hollow fiber structure.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2016
·Vol. 8
·期 21
·3317-3322
·
IF 4.724
Ziyu Liu,Dan Wu,Shu Ren,Xinqing Chen,Minghuang Qiu,Xian Wu,Chengguang Yang,Gaofeng Zeng,Yuhan Sun
Graphical Gasoline from methanol : ZSM-5 crystals with controllable c -axis length were successfully synthesized through a one-pot solvent-free route, with urea as an additive. Catalytic tests for the methanol to gasoline (MTG) conversion showed that the prepared c -axis oriented hierarchical ZSM-5, which allow fast mass transfer, exhibited both 100 % methanol conversion and far longer lifetime (900 h) than those of ZSM-5 with conventional morphology (350 h). ZSM-5 crystals with controllable c -axis length were successfully synthesized through a one-pot solvent-free route, with urea as an additive. X-ray diffraction patterns (XRD) show that the prepared samples exhibit high crystallinity. N 2 adsorption–desorption isotherms and mercury intrusion porosimetry (MIP) analysis together with TEM observations indicate that micro-, meso-, and macropores exist in the obtained samples. Catalytic tests for the methanol to gasoline (MTG) conversion showed that the prepared c -axis oriented hierarchical ZSM-5, which allow fast mass transfer, exhibited both 100 % methanol conversion and far longer lifetime (900 h) than those of ZSM-5 with conventional morphology (350 h) in the MTG reaction. The enhanced MTG performance by the c -axis oriented zeolite under one-pot solvent-free synthesis is of great importance as it is easily scaled-up for industrial applications.
研究领域:
化学
·
催化
·
材料科学
·
能源转换
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2023
·
IF 9.5
Shuyue Pang,Yanhong Li,Xiaofang Chen,Aisheng Huang
The fabrication of mixed matrix membranes (MMMs) by intermixing suitable fillers with organic polymers is an effective strategy to surmount the well-known trade-off effect between gas permeability and selectivity, which can promote separation performance of membranes to a great extent. Two-dimensional (2D) metal-organic frameworks (MOFs) are considered as potential fillers for strengthening the separation performance of MMMs as they possess high aspect ratio and distinctive chemical characteristics. However, it remains challenging in engineering the morphology of the MOFs with desired pore structure and high aspect ratio. In this study, we firstly prepare c-axis oriented ZIF-95 sheets with lateral dimension exceeding 22 μm and thickness of around 3 μm by the solvothermal method. And then the ZIF-95 sheets are incorporated into the polyimide (PI) matrix to fabricate highly c -axis oriented ZIF-95@PI MMMs (denoted as COZIF-95@PI MMMs thereafter). Attributing to the straight permeation channel of ZIF-95 (3.6 Å) for gas permeation as well as its high compatibility with polyimide substrates, the COZIF-95@PI MMMs show a high gas separation capability. At 373 K and 100 kPa for the COZIF-95@PI MMM with 40 wt% loading, the mixture separation factors of H 2 /CH 4 and H 2 /CO 2 are 134 and 58, respectively, and the H 2 permeability exceeds 967 barrer , which is hopeful for the separation and purification of hydrogen.
研究领域:
材料科学
·
化学工程
·
膜技术
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）