Capstone FS-3000是含氟非离子表面活性剂,可以在水性和溶剂型体系下提供优异的降低表面张力的性能,以此加强润湿、分散、流平和其他表面性能。 Capstone FS-3000不含任何VOC(挥发性有机化合物),不含APEO(烷基酚聚氧乙烯醚),非易燃品,可跟任何离子性的表面活性剂相容。
Capstone FS-3000在很低的剂量下即可表现其优异的润湿能力。Capstone FS-3000在普通的、酸性的、含盐的和硬水环境中都可稳定存在,因此适用于各种体系。Capstone FS-3000中不含任何溶剂和水,因此可以方便的添加于水性和溶剂型体系中。Capstone FS-3000广泛适用于清洗、涂料、涂层、胶、薄膜等配方中。
应用:
水性地板漆、地板蜡及抛光蜡
• 提供润湿和流平性能
• 在多层涂层应用中提供重复润湿性能
• 减少缩孔,提高分散速率
• 与碳氢表面活性剂相容
• 推荐使用量为0.01-0.05%有效成分
浓缩清洁液
• 降低表面张力,提供优异润湿以增强清洗效果
• 提供更好的润湿和渗透,特别是对于灰尘和污渍
• 推荐使用量为0.005-0.1%有效成分
金属和电子
• 提高蚀刻效率
• 辅助提高槽式电镀效果
• 可用于锌电池阻垢剂
• 发泡量少,用于光阻剥离液
涂料和涂层
• 与大部分水性和溶剂型体系都相容
• 在双组分聚氨酯涂料中可以迁移至表面成为有效组分
• 可用于UV固化涂料
水性涂料和水性油墨
• 优异的润湿、流平性能,减少橘皮,延长开放时间
• 与大部分水性涂料相容
• 可改善木器漆的润湿性能
• 在水性涂料中的推荐使用量为0.01-0.1%有效成分
处理
• 使用前需摇匀
- 特别是从容器中提取部分样品时
- 对于鼓型容器,为了确保固体颗粒的比例一致,必须进行
彻底的搅拌,包括使用低速搅拌的鼓型搅拌器
• 可能需要水浴/烘箱(~40℃[104°F])来使其澄清
外观:深黄色至微红色液体,掺杂些固体物
pH:6.5–8.5
密度:1.3 g/mL
稳定性:冷冻稳定。使用前需摇匀。在含盐及其他苛性条件下均稳定。在130℃(266°F)的温度下也能保持稳定。
固含量:100%有效成分
保质期:5年
闪点:不燃
物质分类:液体
表面张力表征

Capstone"FS-3000 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products,enabling better wetting
spreading,leveling, and other beneficial properties.FS-3000 does not contain any intentionally added VO0 Or APEO,and is compatible with additives and resins of
any ionic class.Even at very low concentrations,Capstone"FS-3000 can deliver tremendous wetting power. FS-3000 is stable in acidic, basic, brine,and hard water environments, making it easy to formulate into a variety of systems.The absence
of solvent makes FS-3000 a particularly effective additive to orqanic polymers and solvent-based paints and
coatings.lt is also effective as an additive in cleaning
products,paints, coatings, adhesives, and films.
Concentrated Cleaning Solutions
1、Reduces surface tension and provides excellent wetting to achieve cleanability
2、Providesimproved wetting and penetration,especially with difficult to wet soils
3、Suggesteduse rates are 0.005-0.1% A.I.
Metals and Electronics
1、lmproved etching efficiency
2、Effective plating bath aid
3、Zinc battery scale inhibitor
4、Low foamerin photoresist strippers
Performanc
Surface Tensione

Additional Applications
Paints and Coatings
• Compatible with most aqueous- or solvent-based paints
• Will migrate and become part of the cured paint in 2K polyurethane paints
• Can be used in UV coating applications
Aqueous-Based Paints and Inks
• Excellent wetting and leveling, reduced orange peel effect, extend the open time
• Compatible with most aqueous-based paints
• Improved wetting in wood coatings
• Suggested use rates are 0.01–0.1% A.I. in aqueousbased paints
Handling
• Warm to 50 °C (122 °F) and mix well before use
– Especially when taking a partial sample from the container
– For drum size containers, thorough agitation, including use of a drum agitator with low speed mixing, may be necessary to ensure consistent percentage solids throughout