双排管真空气体分配器(具高真空阀)

货号: D492335
有货
只有 %1 左
价格
低至 ¥988.90

概述

产品特点

用于反应体系的惰性气体保护,一个管为真空抽气管,另一个管为惰性气体加入管,两个管以三通节门相连,

从而控制真空和气体依次进入需保护的瓶中。双排管有不同的规格,可同时进行多组保护反应。

该双排管配有 0-4mm 高真空节门。两个管均采用外径为 22mm 的中等壁厚玻璃管吹制而成,

并带有四个小咀。每个出气小咀的外径为 10mm, 每组高真空节门之间的间距为 100mm。

提示:其中后端真空管的两端分别接入真空泵和真空表。

如用油泵,需在真空管油泵间接入冷阱和杜瓦瓶。其中前端惰性气体管的两端分别接入气体钢瓶和鼓泡器

产品规格与参数

SKU 节门组数 总长度 高真空阀门 小咀数量 小咀开口方向 小咀外径 中文描述 包装
D492335-A350mm-1EA 3 350mm 0-4mm 2小咀 前右、后左 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B350mm-1EA 3 350mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C350mm-1EA 3 350mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为 1个
D492335-A450mm-1EA 4 450mm 0-4mm 2小咀 前右、后左 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B450mm-1EA 4 450mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C450mm-1EA 4 450mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个
D492335-A550mm-1EA 5 550mm 0-4mm 2小咀 前右、左后 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B550mm-1EA 5 550mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C550mm-1EA 5 550mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个
D492335-A650mm-1EA 6 650mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个


技术文档

📋 安全数据表 (SDS)

全面的危险、操作、储存及法规合规文件。

下载 SDS →

✅ 分析证书 (COA)

批次质量数据。输入批号以获取对应 COA。

查询 COA →

📊 产品数据表

产品规格和应用的快速参考摘要。

查看数据表 →

🔬 规格说明书

该级别的完整质量属性和验收标准。

查看规格说明 →

高级数据

一般描述
 

产品特点

用于反应体系的惰性气体保护,一个管为真空抽气管,另一个管为惰性气体加入管,两个管以三通节门相连,

从而控制真空和气体依次进入需保护的瓶中。双排管有不同的规格,可同时进行多组保护反应。

该双排管配有 0-4mm 高真空节门。两个管均采用外径为 22mm 的中等壁厚玻璃管吹制而成,

并带有四个小咀。每个出气小咀的外径为 10mm, 每组高真空节门之间的间距为 100mm。

提示:其中后端真空管的两端分别接入真空泵和真空表。

如用油泵,需在真空管油泵间接入冷阱和杜瓦瓶。其中前端惰性气体管的两端分别接入气体钢瓶和鼓泡器

产品规格与参数

SKU 节门组数 总长度 高真空阀门 小咀数量 小咀开口方向 小咀外径 中文描述 包装
D492335-A350mm-1EA 3 350mm 0-4mm 2小咀 前右、后左 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B350mm-1EA 3 350mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C350mm-1EA 3 350mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为 1个
D492335-A450mm-1EA 4 450mm 0-4mm 2小咀 前右、后左 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B450mm-1EA 4 450mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C450mm-1EA 4 450mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个
D492335-A550mm-1EA 5 550mm 0-4mm 2小咀 前右、左后 10mm 带2个10mm通气小咀;分别前右、后左 1个
D492335-B550mm-1EA 5 550mm 0-4mm 3小咀 前左、前右、后左 10mm 带3个10mm通气小咀;分别为前左、前右、后左 1个
D492335-C550mm-1EA 5 550mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个
D492335-A650mm-1EA 6 650mm 0-4mm 4小咀 4方向都开口 10mm 带4个10mm通气小咀;分别为前左、前右、后左、后右 1个



Product features

For inert gas protection of the reaction system, one pipe is a vacuum extraction pipe and the other pipe is an inert gas inlet pipe. The two pipes are connected by a three-way valve,

Thereby controlling the vacuum and gas to enter the bottle to be protected in turn. The double row tubes have different specifications and can carry out multiple groups of protection reactions at the same time.

The double row pipe is equipped with 0-4mm high vacuum throttle. Both tubes are blown from a medium wall thickness glass tube with an outer diameter of 22 mm,

And has four small nozzles. The outer diameter of each air outlet nozzle is 10mm, and the spacing between each group of high vacuum valves is 100mm.

Note: the two ends of the rear vacuum pipe are connected to the vacuum pump and the vacuum meter respectively.

If the oil pump is used, the cold trap and Dewar bottle shall be connected between the vacuum tube and the oil pump. The two ends of the front-end inert gas pipe are respectively connected to the gas cylinder and the bubbler

Product specifications and parameters

SKU Number of door groups Total length High vacuum valve Number of small nozzles Nozzle opening direction Outer diameter of small nozzle Description: Package
D492335-A350mm-1EA 3 350mm 0-4mm 2 Front-Right and Rear-Left 10mm Manifold with Front-Right and Rear-Left 10mm Hose Connections 1piece
D492335-B350mm-1EA 3 350mm 0-4mm 3 Front-Left-Right and Rear-Left 10mm Manifold with Front-Left-Right and Rear-Left 10mm Hose Connections 1piece
D492335-C350mm-1EA 3 350mm 0-4mm 4 Front-Left-Right and Rear-Left-Right 10mm Manifold with Front-Left-Right and Rear-Left-Right 10mm Hose Connections 1piece
D492335-A450mm-1EA 4 450mm 0-4mm 2 Front-Right and Rear-Left 10mm Manifold with Front-Right and Rear-Left 10mm Hose Connections 1piece
D492335-B450mm-1EA 4 450mm 0-4mm 3 Front-Left-Right and Rear-Left 10mm Manifold with Front-Left-Right and Rear-Left 10mm Hose Connections 1piece
D492335-C450mm-1EA 4 450mm 0-4mm 4 Front-Left-Right and Rear-Left-Right 10mm Manifold with Front-Left-Right and Rear-Left-Right 10mm Hose Connections 1piece
D492335-A550mm-1EA 5 550mm 0-4mm 2 Front-Right and Rear-Left 10mm Manifold with Front-Right and Rear-Left 10mm Hose Connections 1piece
D492335-B550mm-1EA 5 550mm 0-4mm 3 Front-Left-Right and Rear-Left 10mm Manifold with Front-Left-Right and Rear-Left 10mm Hose Connections 1piece
D492335-C550mm-1EA 5 550mm 0-4mm 4 Front-Left-Right and Rear-Left-Right 10mm Manifold with Front-Left-Right and Rear-Left-Right 10mm Hose Connections 1piece
D492335-A650mm-1EA 6 650mm 0-4mm 4 Front-Left-Right and Rear-Left-Right 10mm Manifold with Front-Left-Right and Rear-Left-Right 10mm Hose Connections 1piece
质检证书(CoA,COO,BSE/TSE 和分析图谱)
C of A & Other Certificates(BSE/TSE, COO):
输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!

找到9个结果

批号(Lot Number) 证书类型 货号
G2313045 分析证书 D492335
G2313044 分析证书 D492335
G2313043 分析证书 D492335
G2313042 分析证书 D492335
G2313041 分析证书 D492335
G2313040 分析证书 D492335
G2313038 分析证书 D492335
G2313037 分析证书 D492335
G2313036 分析证书 D492335
溶液计算器