技术文章

Catalytic Mechanisms, Substrate Specificity, and Experimental Applications of the Ribonuclease Family

Ribonucleases cleave RNA by recognizing specific bases, nucleic acid hybrid structures, or double-stranded RNA conformations, and have distinct application positions in nucleic acid purification, structural analysis, gene regulation, and disease mechanism research.

 

Keywords: ribonuclease; RNase A; RNase T1; RNase H; RNase III; RNase R; RNA degradation; substrate specificity; RNA structure analysis; RNase contamination

 

1 Classification and Molecular Features of Ribonucleases

Ribonucleases (RNases) are enzymes that catalyze cleavage of RNA phosphodiester bonds. Different RNases vary markedly in protein structure, catalytic residues, metal ion dependence, and substrate selection, and can be classified according to cleavage position, substrate type, and catalytic mechanism.

 

1.1 Endoribonucleases and exoribonucleases

Endoribonucleases cleave phosphodiester bonds within RNA chains and can rapidly generate multiple shorter fragments. RNase A, RNase T1, RNase H, and RNase III are all endoribonucleases. Exoribonucleases gradually remove nucleotides from RNA termini. For example, RNase R mainly initiates 3′→5′ degradation from RNA with an accessible 3′ end and participates in RNA quality control and abnormal RNA clearance.

 

1.2 Sequence-specific and structure-specific RNases

RNase A preferentially cleaves phosphodiester bonds after pyrimidine nucleotides, while RNase T1 mainly recognizes guanine nucleotides. RNase H recognizes the RNA strand in RNA/DNA hybrid duplexes, whereas RNase III family enzymes mainly recognize double-stranded RNA or RNA with double-stranded stem structures. The “specificity” of different enzymes may arise from base recognition, sugar ring conformation recognition, double-helix geometry recognition, or a combination of multiple factors.

 

1.3 Metal-independent and metal-dependent RNases

RNase A and RNase T1 use the 2′-hydroxyl group on RNA ribose to complete an intramolecular transphosphorylation reaction and usually do not depend on divalent metal ions. RNase H and RNase III family enzymes depend on Mg²⁺ or Mn²⁺ to participate in active-site construction and water molecule activation, and therefore can be inhibited by metal chelators such as EDTA.

 

1.4 RNase A and RNase B

RNase B is the glycosylated form of RNase A. The two have similar catalytic scaffolds and RNA cleavage properties, but RNase B carries N-linked oligosaccharides, and its molecular weight, isoelectric properties, and chromatographic behavior differ from those of RNase A. RNase B is commonly used in glycoprotein analysis, glycan heterogeneity evaluation, and mass spectrometry method development.

 

2 Catalytic Mechanisms of RNA Degradation

Cleavage of RNA phosphodiester bonds mainly occurs through 2′-hydroxyl-mediated transphosphorylation or metal ion-dependent direct hydrolysis. These two reaction types generate different terminal structures and also determine enzyme requirements for substrate conformation and buffer conditions.

 

2.1 2′-Hydroxyl-Mediated Transphosphorylation Mechanism

RNase A and RNase T1 first activate the 2′-hydroxyl group of the nucleotide to be cleaved, allowing it to attack the adjacent phosphate group, forming a 2′,3′-cyclic phosphate intermediate and releasing an RNA fragment with a 5′-hydroxyl end. The cyclic phosphate is then further hydrolyzed to form a 3′-phosphate end. Because the reaction depends on the 2′-hydroxyl group of ribose, these enzymes usually cannot cleave DNA through the same mechanism.

The active site of RNase A is mainly composed of His12, Lys41, and His119. During the transphosphorylation step, His12 promotes deprotonation of the 2′-hydroxyl group, His119 donates a proton to the leaving group, and Lys41 helps stabilize the negatively charged transition state. During cyclic phosphate hydrolysis, the acid-base functions of the two histidine residues switch, allowing the catalytic cycle to proceed.

 

2.2 Metal Ion-Dependent Hydrolysis Mechanism

RNase H and RNase III family enzymes bind divalent metal ions through acidic residues in the active site. Metal ions can position the substrate phosphate group, stabilize accumulated negative charge during the reaction, and activate a water molecule, enabling direct attack on the phosphodiester bond. The cleavage products usually have 5′-phosphate and 3′-hydroxyl termini and do not pass through a 2′,3′-cyclic phosphate intermediate.

Catalysis by RNase H requires an RNA/DNA hybrid duplex that provides appropriate groove width and sugar ring conformation. RNase III family enzymes recognize A-form double helices through double-stranded RNA-binding regions and determine cleavage positions according to the spatial distance between the enzyme and the double-stranded substrate.

 

3 Substrate Recognition and Cleavage Specificity of Different RNases

3.1 Pyrimidine nucleotide recognition

RNase A mainly cleaves phosphodiester bonds on the 3′ side of cytidine or uridine nucleotides in single-stranded RNA. Its cleavage efficiency depends not only on the type of pyrimidine base, but also on adjacent nucleotides, local secondary structure, and whether the substrate is exposed. Therefore, stable double-stranded regions are usually not easily cleaved by RNase A.

 

3.2 Guanine nucleotide recognition

RNase T1 mainly cleaves after guanine nucleotides in single-stranded RNA and can generate RNA fragments with defined G-site information. Limited RNase T1 digestion is commonly used for RNA structure probing, RNA fingerprinting, and oligonucleotide mass spectrometry identification. When G sites are masked by base pairing or protein binding, cleavage efficiency decreases markedly.

 

3.3 RNA/DNA hybrid structure recognition

RNase H recognizes RNA/DNA hybrid duplexes and selectively degrades the RNA strand within them. It usually does not cleave single-stranded RNA, double-stranded RNA, or double-stranded DNA. By allowing complementary DNA oligonucleotides to form hybrid regions with target RNA, RNase H can be guided to generate one or more cuts in designated regions, enabling sequence-directed RNA removal.

 

3.4 Double-stranded RNA recognition

RNase III family enzymes mainly recognize double-stranded RNA and RNA with double-stranded stem structures. Bacterial RNase III usually acts as a dimer on both sides of the duplex simultaneously, generating products with 5′-phosphate, 3′-hydroxyl, and short 3′ overhangs. Eukaryotic Drosha and Dicer also belong to the RNase III family but contain more complex auxiliary domains and participate in primary miRNA and precursor miRNA processing, respectively.

 

3.5 RNA termini and higher-order structure recognition

RNase R mainly initiates exonucleolytic degradation from RNA with an accessible 3′ end and has strong degradation activity against most linear RNAs. However, closed circular RNAs lack free termini and are therefore relatively resistant to RNase R treatment. Linear RNAs with stable secondary structures may also fail to be completely degraded because their ends are inaccessible or their structures are too compact.

 

4 Functional Differences Among RNase A, RNase T1, RNase H, and RNase III Family Enzymes

 

Table 1. Comparison of Substrate Specificity and Applications of Common Ribonucleases

 

Enzyme Type

Main Substrates and Recognition Features

Catalytic Dependence

Cleavage Product Features

Typical Applications

RNase A

Single-stranded RNA, preferentially sites after pyrimidine nucleotides

Usually metal-independent

Mainly forms 3′-phosphate and 5′-hydroxyl termini

RNA removal from DNA samples, single-stranded RNA digestion, RNase protection assays

RNase T1

Single-stranded RNA, mainly recognizes sites after guanine nucleotides

Usually metal-independent

Mainly forms 3′-phosphate and 5′-hydroxyl termini

RNA structure probing, G-site analysis, RNA mass spectrometry sample preparation

RNase H

RNA strand in RNA/DNA hybrid duplexes

Mg²⁺- or Mn²⁺-dependent

Forms 5′-phosphate and 3′-hydroxyl termini

RNA template removal after reverse transcription, oligonucleotide-guided RNA degradation

RNase H2/HII

RNA/DNA junction structures and ribonucleotides embedded in DNA

Divalent metal ion-dependent

Forms nucleic acid nicks that can be further repaired or processed

Ribonucleotide excision, RNA/DNA junction site research

RNase III family enzymes

Double-stranded RNA and RNA containing double-stranded stem structures

Divalent metal ion-dependent

Usually forms 5′-phosphate, 3′-hydroxyl termini, and short 3′ overhangs

Double-stranded RNA processing, miRNA and siRNA pathway research

RNase R

Most linear RNAs with accessible 3′ ends

Usually divalent metal ion-dependent

Gradually degrades RNA from the 3′ end

Linear RNA removal, circular RNA enrichment, RNA stability research

 

5 Applications of Ribonucleases in RNA Extraction, Removal, and Structural Analysis

5.1 RNA removal from DNA samples

Plasmid DNA, genomic DNA, and other DNA preparations are often contaminated with large amounts of RNA. DNase-free RNase A can be added for digestion. After reaction, RNase and degradation fragments need to be removed by column purification, precipitation, or organic extraction to prevent residual enzyme from affecting subsequent RNA-related experiments.

 

5.2 Targeted removal of specific RNAs

After DNA oligonucleotides are hybridized to target RNA, RNase H can be added to selectively degrade RNA within the hybridized region. This method can be used to remove highly abundant RNA, clear RNA templates after reverse transcription, or cleave specific transcripts. Its efficiency depends on oligonucleotide design, target region accessibility, and hybrid stability.

 

5.3 Removal of single-stranded RNA and unhybridized probes

RNase A and RNase T1 can be combined to degrade single-stranded RNA that has not formed stable hybrid structures. In RNase protection assays, after target RNA hybridizes with a complementary probe, unpaired regions are enzymatically removed, and the protected fragments can be used to analyze transcript expression, splicing forms, and transcription boundaries.

 

5.4 RNA structure probing

Under limited digestion conditions, RNase T1 preferentially cleaves accessible unpaired G sites, while RNase A reflects accessible pyrimidine sites. Cleavage results can be analyzed together with untreated controls and other structural probes to infer single-stranded regions, stem-loop structures, and protein-protected regions. Excessive enzyme amount or prolonged reaction time can cause initial cuts to loosen RNA structures, leading to secondary cleavage and reducing the accuracy of structural interpretation.

 

5.5 Double-stranded RNA and circular RNA analysis

RNase III can be used to process double-stranded RNA and hairpin RNA and analyze the effects of duplex length, mismatches, and overhangs on cleavage positioning. RNase R can degrade most linear RNAs and is commonly used for circular RNA enrichment. However, stable linear RNAs may also show some resistance, so RNA retained after RNase R treatment cannot be directly equated with circular RNA and still requires validation by amplification across back-splice junctions or other methods.

 

6 Applications of Ribonucleases in Molecular Biology and Biomedical Research

6.1 Reverse transcription and cDNA preparation

After first-strand cDNA synthesis is completed, RNase H can degrade the RNA template in RNA/DNA hybrid duplexes, reducing its effects on second-strand synthesis, PCR amplification, and library construction. RNase H-deficient or reduced-activity reverse transcriptases help preserve more intact RNA templates during first-strand synthesis and are commonly used for cDNA synthesis of longer transcripts.

 

6.2 Antisense oligonucleotide research

Some antisense oligonucleotides can recruit intracellular RNase H1 and degrade the RNA strand after forming RNA/DNA-like hybrid structures with target RNA. The effect is influenced by oligonucleotide chemical modification, hybrid structure, target region accessibility, and intracellular distribution. Not all antisense nucleic acids act through an RNase H mechanism.

 

6.3 miRNA and siRNA processing research

Drosha processes primary miRNA into precursor miRNA in the nucleus, and Dicer further generates short double-stranded RNA in the cytoplasm. The spatial arrangement and cleavage distance of RNase III domains determine small RNA terminal features and affect their gene regulatory function after loading into the RNA-induced silencing complex.

 

6.4 R-loop and genome stability research

RNase H1 can degrade the RNA strand in RNA/DNA hybrid structures and is commonly used to verify whether experimental signals originate from R-loops. RNase H2 also participates in recognition and removal of single ribonucleotides embedded in DNA. Abnormal activity can affect replication stability, DNA damage response, and genome integrity.

 

6.5 Antiviral and cellular stress research

RNase L is an effector ribonuclease in the 2′-5′ oligoadenylate system. After activation, it can degrade cellular and viral RNA and participate in antiviral responses and cell fate regulation. IRE1 has endoplasmic reticulum transmembrane kinase and ribonuclease activities, can splice XBP1 mRNA and degrade some target RNAs, and is an important regulatory node of the unfolded protein response.

 

7 RNase Contamination Control

RNases are widely present in skin, dust, microorganisms, and common laboratory environments. Some RNases are structurally stable and may retain or recover activity even after short-term heating. RNA experiments should establish contamination control workflows at the levels of operation, consumables, and reagents.

 

7.1 Operational control

Clean gloves should be worn and changed promptly during operation. Direct contact with centrifuge tube openings, the inside of tip boxes, and lower parts of pipettes with bare hands should be avoided. RNA experiments should use dedicated pipettes, tube racks, and electrophoresis apparatus, and RNA operation areas should be separated from plasmid and protein experiment areas.

 

7.2 Treatment of consumables and experimental surfaces

Centrifuge tubes, tips, and solution containers labeled RNase-free should be used. Work surfaces and equipment can be treated with nuclease removal reagents. Ethanol is mainly used for cleaning and disinfection and cannot guarantee sufficient destruction of RNase activity.

 

7.3 Reaction solution control

Buffers should be prepared using RNase-Free Water and dedicated reagents. Diethyl pyrocarbonate can be used to treat some aqueous solutions that do not contain amino groups, but it is not suitable for amine-containing buffer systems such as Tris and cannot be used directly for proteins or enzyme preparations.

 

7.4 Applicable range of RNase inhibitors

Common protein-based RNase inhibitors mainly inhibit many mammalian RNase A family members and do not universally inhibit RNase T1, RNase H, RNase III, or RNase R. Experiments should select control methods according to the potential contaminating enzyme type. Adding an RNase inhibitor should not be regarded as a universal protective measure.

 

8 Products

 

Table 2. Products Related to Ribonucleases and Enzymology Research

 

Cat. No.

Product Name

Grade & Purity

Research Stage

Main Application

R755008

RNase

from bovine pancreas

General RNA degradation

Used for RNA digestion, RNA removal from DNA samples, and basic ribonuclease experiments

R1522663

RNase A

Bioactive, ActiBioPure™, DNase-free, native, high performance, Suitable for molecular biology, EnzymoPure™, ≥85%(SDS-PAGE), from bovine pancreas; ≥80 Kunitz U/mg enzyme powder

Single-stranded RNA degradation

Removes RNA from DNA samples and supports single-stranded RNA digestion and RNase protection assays

R401532

Ribonuclease A

EnzymoPure™, ≥60 Kunitz units/mg Lyophilized Powder

Single-stranded RNA degradation

Used for routine RNA digestion and RNase A enzymology experiments

R665518

RNase A

Recombinant, DNase-free, EnzymoPure™, Protease Free, sterile, ≥90%(SDS-PAGE), 10 mg/mL; ≥350 Kunitz units/mL; expressed in Pichia pastoris

Recombinant RNase A application

Used for single-stranded RNA degradation experiments requiring control of DNase and protease contamination

R665521

Recombinant RNase A

Bioactive, recombinant, ActiBioPure™, DNase-free, high performance, EnzymoPure™, Protease Free, ≥90%(SDS-PAGE), 100 mg/mL

High-concentration RNA digestion

Used for rapid RNA degradation and high-concentration RNase A treatment systems

R128622

Ribonuclease A from bovine pancreas

EnzymoPure™, ≥2,500 units/mg dry weight

Single-stranded RNA degradation

Used for RNA removal during DNA purification and RNase A activity research

R104906

Ribonuclease A from bovine pancreas

EnzymoPure™, ≥50 Kunitz units/mg

Routine RNA degradation

Used for RNA removal in DNA preparation and RNA substrate digestion

R128619

Ribonuclease A from bovine pancreas(DNase & Protease Free)

Bioactive, ActiBioPure™, DNase-free, native, high performance, EnzymoPure™, Protease Free, ≥2,000 units/mg protein

High-purity RNA removal

Used for RNA digestion requiring strict control of DNase and protease contamination

R128620

Ribonuclease A from bovine pancreas(Purified)

EnzymoPure™, ≥3,000 units/mg dry weight

High-activity RNase A experiments

Used for RNA degradation, nucleic acid purification, and RNase A activity research

R128621

Ribonuclease A from bovine pancreas(Purified Solution)

EnzymoPure™, ≥3,000 units/mg protein

Liquid RNase A reaction

Used for RNA degradation experiments requiring direct preparation of enzymatic reaction systems

R128623

Ribonuclease B from bovine pancreas

EnzymoPure™, ≥1,000 units/mg dry weight

Glycosylated RNase research

Used for RNase B enzymology, glycosylation, and protein structure research

R1426428

RNase B, Bovine Pancreas

 

RNase B structural research

Used for molecular feature and functional research of glycosylated ribonuclease

R754996

RNase B Glycoprotein Standard from bovine pancreas

Proteomics grade

Glycoprotein analysis standard

Used for glycosylation analysis, mass spectrometry method development, and proteomics quality control

R1522664

RNase T1

Recombinant, DNase-free, Suitable for molecular biology, EnzymoPure™, ≥95%(SDS-PAGE), expressed in E. coli; 500 U/μL

G-specific RNA cleavage

Used for RNA structure probing, guanine site analysis, and RNase protection assays

R128610

Ribonuclease T1 from Aspergillus oryzae(Chromatographically Purif.)

EnzymoPure™, ≥300,000 units/mg protein

G-specific RNA degradation

Used for RNA sequence and structure analysis and nucleic acid mass spectrometry sample preparation

R128612

Ribonuclease T1 from Aspergillus oryzae(Chromatographically Purified,Lyophilized)

EnzymoPure™, ≥2,500 units/mg

G-specific RNA cleavage

Used for RNA structure probing, cleavage map analysis, and RNA digestion

R749974

Thermostable RNase T1

BioReagent, DNase-free, Suitable for molecular biology, EnzymoPure™, ≥95%(SDS-PAGE), 500 U/μL

High-temperature G-specific cleavage

Used to reduce the influence of RNA secondary structure and analyze accessible G sites

R665576

RNase H

600 U

RNA/DNA hybrid strand treatment

Selectively degrades the RNA strand in RNA/DNA hybrid duplexes

R754998

Ribonuclease H (RNase H)

From Escherichia coli H 560 pol A1

RNase H enzymology research

Used for RNA/DNA hybrid substrate cleavage and RNA template removal after reverse transcription

T751065

Thermostable RNase H

BioReagent, DNase, RNase free, Suitable for molecular biology, EnzymoPure™, sterile, for DNA and RNA applications, ≥95%, 5 U/μL

High-temperature hybrid RNA degradation

Used to remove RNA strands from high-GC or structurally complex RNA/DNA hybrid substrates

rp224200

RNase HII

Animal-free, carrier-free, bioactive, ActiBioPure™, EnzymoPure™, ≥95%(SDS-PAGE), 5.0 U/μL

RNase H2 functional research

Used for research on RNA/DNA junction structures and recognition of ribonucleotides in DNA

T1522666

Thermostable RNase HII

Recombinant, Suitable for molecular biology, EnzymoPure™, ≥95%(SDS-PAGE), expressed in E. coli; 2 U/μL

High-temperature RNase HII reaction

Used to recognize and cleave nucleic acid substrates containing ribonucleotides under high-temperature conditions

R749972

RNase III (dsRNA-specific)

Animal-free, carrier-free, bioactive, ActiBioPure™, DNase-free, EnzymoPure™, sterile, 2.0 U/μL

Double-stranded RNA cleavage

Used for double-stranded RNA and hairpin RNA processing and RNA interference-related research

R749973

RNase R

Recombinant, BioReagent, DNase-free, endotoxin tested, mycoplasma-free, Suitable for molecular biology, EnzymoPure™, ≥95%(SDS-PAGE), expressed in E. coli; 20 U/μL, PCR Reagent

, for DNA synthesis

, For In Vitro Transcription, for DNA and RNA applications, Exonuclease

RNA exonucleolytic degradation

Used for degradation of most linear RNAs, RNA stability analysis, and circular RNA enrichment

R1436123

Ribonuclease T2, Aspergillus oryzae

 

RNase T2 research

Used for RNA degradation and functional research of the RNase T2 family

 

Table 3. Products Related to RNase Inhibition and Functional Regulation

 

Cat. No.

Product Name

Grade & Purity

Research Stage

Main Application

R489315

RNase Inhibitor

PharmPure™, pharmaceutical grade, ≥95%, 40 U/μL

RNA sample protection

Used for RNase activity inhibition in RNA extraction, reverse transcription, and in vitro transcription systems

R489312

RNase Inhibitor

PharmPure™, pharmaceutical grade, ≥95%, 1000 U/μL

High-concentration RNase inhibition

Used for RNA protection in high-throughput or large-volume RNA reaction systems

R292575

RNase Inhibitor(RNasin)

40 U/μL

RNA protection

Used for RNase inhibition during reverse transcription, in vitro transcription, and RNA handling

R350859

RNase Inhibitor (Murine, 40U/μL)

Recombinant, BioReagent, DNase, RNase free, Suitable for molecular biology, for DNA and RNA applications, ≥95%(SDS-PAGE), 40 U/μL

RNase A family inhibition

Used for RNA protection, reverse transcription, and RNA enzymatic reaction systems

N170153

NSC727447

Moligand™, ≥98%

Viral RNase H inhibition

Used for research on the RNase H domain and inhibition mechanism of HIV reverse transcriptase

R1426916

RNase L-IN-1

≥98%

RNase L functional inhibition

Used for RNase L-mediated RNA degradation, antiviral, and cellular stress research

R1427600

RNase L-IN-1 trihydrochloride

≥99%

RNase L functional inhibition

Used for RNase L signaling and its downstream RNA degradation effects

R1498102

RNase L-IN-1 trihydrochloride

Moligand™, 10 mM in DMSO

RNase L inhibitor treatment

Used for RNase L activity intervention in cell experiments

C167186

4μ8C

≥98%(HPLC)

IRE1 RNase inhibition

Used for research on IRE1-mediated XBP1 mRNA splicing and endoplasmic reticulum stress

 

Table 4. Products Related to RNA Reverse Transcription, Sample Processing, and RNase Contamination Control

 

Cat. No.

Product Name

Grade & Purity

Research Stage

Main Application

M745690

EnzymoPure™M-MuLV Reverse Transcriptase(RNase H minus)

EnzymoPure™, free of DNA endonuclease, exonuclease, phosphatase, and RNase

Reverse transcription and cDNA synthesis

Reduces RNA template degradation during first-strand cDNA synthesis

M745695

EnzymoPure™M-MuLV Reverse Transcriptase(RNase H minus)

EnzymoPure™, free of DNA endonuclease, exonuclease, phosphatase, and RNase

Reverse transcription and cDNA synthesis

Used for reverse transcription systems requiring reduced RNase H activity

R1373644

Recombinant DNase I, RNase-free

EnzymoPure™, ≥95%(SDS-PAGE), 1 U/μL

DNA removal from RNA samples

Digests DNA in RNA samples and reduces the risk of introducing exogenous RNase

R665526

RNase-Free Water

100 mL

RNA reaction system preparation

Used for RNA extraction, enzymatic digestion, reverse transcription, and related buffer preparation

R666126

RNase and DNA Remover

250 mL

RNase and DNA contamination control

Used to remove RNase and DNA contamination from work surfaces and instruments

R749971

RNase and DNase Away

BioReagent, ready-to-use

Nuclease contamination control

Used to remove nuclease contamination from experimental surfaces and instruments

R749975

RNase, DNase and DNA Away

BioReagent, ready-to-use

Nuclease and DNA contamination control

Used to remove nuclease and DNA contamination from RNA experiment areas

R749976

RNase, DNase, RNA and DNA Away

BioReagent, ready-to-use

Nuclease and nucleic acid contamination control

Used to remove nuclease and residual nucleic acid contamination from work surfaces and instruments

 

The experimental value of ribonucleases depends on their substrate recognition mode rather than merely their RNA degradation capacity. Selecting enzyme types according to base preference, hybrid structure, double-stranded conformation, and RNA termini, and combining this with contamination control, product analysis, and reaction condition validation, is necessary to obtain interpretable and reproducible experimental results.

 

For more related articles, please see below:

[1] Nucleic Acid and Nuclease Decontamination in Biopharmaceutical Manufacturing and Molecular Testing Workflows

[2] Deoxyribonuclease (DNase): DNA Hydrolytic Cleavage Properties, Methodological Value, and Multi-Context Applications

[3] dsDNase-Mediated Hydrolysis of Double-Stranded DNA: Enzymatic Characteristics, Methodological Strategies, and Bioanalytical Applications

[4] Micrococcal Nuclease (MNase): A Technical Review of Enzymatic Properties, Reaction Control, and Research and Biomanufacturing Applications

[5] Proteinase K and Ribonuclease A

目录: 技术文章

Da — 若无特别说明,分子量单位默认为道尔顿。   Mw — 重均分子量。   Mn — 数均分子量。

产品仅供科研与开发使用,不用于人体、动物、诊断或治疗。

引用本文

阿拉丁科学.《Catalytic Mechanisms, Substrate Specificity, and Experimental Applications of the Ribonuclease Family》. 阿拉丁知识库,更新于 2026年8月12日。 https://www.aladdin-e.com/zh_cn/faqs/catalytic-mechanisms-substrate-specificity-and-experimental-applications-of-the-ribonuclease-family-en.html
这篇文章对您有帮助吗? Yes No 有 1 人觉得有帮助