For PCR
聚合酶链式反应(Polymerase Chain Reaction,PCR)对原料纯度与杂质背景高度敏感。即便是痕量的核酸酶、金属离子、内毒素或有机杂质,都可能显著抑制聚合酶活性,导致扩增灵敏度下降、特异性减弱或结果不可重复。
探索阿拉丁生物化学品和试剂的详细规格、分级标准和纯度水平。确保科学研究的可靠性和性能。
聚合酶链式反应(Polymerase Chain Reaction,PCR)对原料纯度与杂质背景高度敏感。即便是痕量的核酸酶、金属离子、内毒素或有机杂质,都可能显著抑制聚合酶活性,导致扩增灵敏度下降、特异性减弱或结果不可重复。
Polymerase chain reaction (PCR) is highly sensitive to raw-material purity and impurity background. Even trace levels of nucleases, metal ions, endotoxin, or organic contaminants can markedly inhibit polymerase activity, lowering sensitivity and specificity and undermining reproducibility.
A for chiral derivatization reagent is a derivatization reagent purpose-built and application-qualified for stereochemical measurements—e.g., ee (enantiomeric excess)/er (enantiomeric ratio) determination and, where applicable, absolute-configuration assignment.(ee/er quick card: if R:S = 70:30 ...
用于手性衍生化试剂是指:为立体化学测定(如ee(对映体过量)/er(对映体比)测量、绝对构型判定)而专设并经应用级验证的衍生化试剂。(ee/er小卡片:若 R:S= 70:30(er),则ee=|70−30|/100 ×100% =40%(R过量)。)其通过与手性分析物(胺、醇、羧酸、氨基酸、多元醇等)发生共价反应,将原本互为对映体的 R/S 转化为一对非对映体衍生物,使之在非手性系统(普通 ...
Benchmark reagent (PT; Benchmark reagent) is a China-market grade label indicating a reagent suitable for use as a primary standard. Its core purpose is to prepare standard solutions directly or standardize titrants (establish/verify concentration or factor), while providing metrological ...
基准试剂(PT,Benchmark reagent)是在中国市场分级体系中用于指示“适合作为原级标准(primary ...
AR (Analytical Reagent) is a vendor-defined label historically used for chemicals intended for general analytical use in laboratories. It signals a higher level of control over impurities than “technical” or “chemically pure (CP)” grades, and typically provides more detailed specifications and a ...
AR (Analytical Reagent,分析试剂)是一种由供应商自行定义的标签,历史上用于标识适用于一般分析用途的化学品。与 “technical(技术级)” 或 CP (chemically pure,化学纯) 等级相比,AR 通常意味着更严格的杂质控制,并为每个批次提供更详细的规格与分析证明/批次检验证书 (Certificate of Analysis, CoA)。但需要注意,AR 并非单一通行的全球标准。在实际使用中,各家供应商都会公布其AR等级的覆盖范围,并在适用时说明某一产品是否额外符合ACS Reagent ...
“Purified” is a vendor-defined grade for chemicals of good/general laboratory quality used where no official standard (e.g., ACS, USP, FCC) is required. It’s commonly used for inorganics and teaching/general lab work; impurity limits are looser or not harmonized across suppliers. It is not ...