产品介绍
明胶基高强度水凝胶溶液由邻硝基苄醇化明胶 (GelNB)、甲基丙烯酸酯化透明质酸钠 (HAMA)、光引发剂 (NAP)及磷酸盐水溶液组成,是经无菌处理的即用型水凝胶溶液。该产品承袭了明胶分子优异的生物相容性、细胞可粘附性以及生物可降解性。可用于细胞的表面培养、组织工程植入物等方向。与传统明胶基 (GelMA)水凝胶相比,该材料表现出了更好的弹性和韧性,为组织修复和再生医学提供了广阔的应用前景。
产品规格
| 产品货号 | 外观 | 规格 | 备注 |
G1518389
| 淡黄色透明溶液 | 5 mL/支、10 mL/支 | 避光保存 |
性能参数
| 项目 | 性能参数 | 项目 | 性能参数 |
| 拉伸模量 | 380~410 kPa | 断裂延伸率 | 168~180% |
| 拉伸强度 | 1.7~2.2 MPa | 压缩模量 | 550~690 kPa |
| 压缩强度 | 7.4~8.3 MPa | 含水量 | >80% |
| 溶胀度 | 150~170% | 细胞相容性 | 无潜在细胞毒性 |
使用方法
1、在37 ºC-60 ºC下加热预灌封注射器针筒,直到针筒内墨水变成可流动液体后使用。
2、使用前将推杆与注射器内的胶塞旋紧,拧开硬螺旋胶塞,即可推出使用。
3、产品需在365-405 nm波长光照射下发生交联反应形成凝胶。
注意事项
1、产品经无菌处理,取用时注意无菌操作,避免微生物污染。
2、使用前,产品注射器外壁可用酒精擦拭消毒。
3、产品需严格避光保存。
Product Introduction
Gelatin-based high-strength hydrogel solution is composed of o-nitrobenzyl alcohol-modified gelatin (GelNB), methacrylated hyaluronic acid sodium salt (HAMA), photoinitiator (NAP) and phosphate aqueous solution. It is a sterile, ready-to-use hydrogel solution. This product inherits the excellent biocompatibility, cell adhesiveness and biodegradability of gelatin molecules. It can be used for cell surface culture, tissue engineering implants and other applications. Compared with traditional gelatin-based (GelMA) hydrogels, this material exhibits better elasticity and toughness, providing broad application prospects for tissue repair and regenerative medicine.
Product Specifications
Product Code
| Appearance
| Specification
| Note
|
G1518389
| Pale yellow transparent solution
| 5 mL/vial、10 mL/vial | Store in the dark |
Performance Parameters
| Item | Performance Parameter | Item | Performance Parameter |
| Tensile Modulus | 380~410 kPa | Elongation at Break | 168~180% |
| Tensile Strength | 1.7~2.0 MPa | Compressive Modulus | 550~690 kPa |
| Compressive Strength | 7.4~8.3 MPa | Water Content | >80% |
| Swelling Degree | 150~170% | Cytocompatibility | No potential cytotoxicity |
Instructions for Use
1. Heat the pre-filled syringe barrel at 37 ºC-60 ºC until the ink inside becomes a flowable liquid before use.
2. Before use, tighten the plunger to the rubber stopper inside the syringe, then unscrew the hard spiral rubber stopper to push out the solution for use.
3. The product undergoes cross-linking reaction to form a gel when irradiated with light at a wavelength of 365-405 nm.
Precautions
1. The product is sterilized. Please maintain aseptic operation during use to avoid microbial contamination.
2. Before use, the outer surface of the product syringe can be wiped and disinfected with alcohol.
3. The product must be stored strictly protected from light.