基本描述

别名

鱼腥草外囊泡

英文别名

Exosome From Houttuynia cordata | Houttuynia cordata Extracellular Vesicles

规格或纯度

BioReagent, 无菌, ≥90%, 1E+10 Particles/EA

稳定性与储存

长期储存-80℃（12个月）；复溶后建议分装，避免反复冻融。

英文名称

Houttuynia cordata Exosomes from Rhizome

储存温度

-80℃储存,避免反复冻融

运输条件

超低温冰袋运输

产品介绍

复溶(Reconstitution)：Reconstitute in Ultrapure water or 10mM PBS (pH 7.4).

鱼腥草 (Houttuynia cordata) 是一种广泛分布的药食同源的生物材料，据研究报道，鱼腥草在抗炎症、抗氧化、抗凋亡等方面具有良好的应用效果。鱼腥草来源外泌体包含多种具有多种调节生命活动的miRNA，可作为植物源外泌体研究和药物开发的材料。
该产品由鱼腥草的茎叶和根系提取物经分离纯化得到的外泌体，可用于实验对照、直接进行负载和靶向改造、组织修复等研究。

产品规格：

名称	鱼腥草外泌体来源于根茎
规格	1E+10 Particles/瓶
外观	白色粉末
pH	7.0
无菌检测	无菌生长
总蛋白浓度	（BCA）
纯度	≥90%

产品优势：
严格的质控标准：多项质控分析，有严格的浓度、纯度等不同质控标准。
完整的表征结果：外泌体原料产品按照MISEV2018指南，从电镜形态、粒径大小及颗粒分布、WB三阳一阴蛋白标志物三个维度进行表征。
广泛的应用场景：可用于实验流程及功能实验的对照；可用于靶向改造、装载分子等工程化改造，以及外泌体治疗产品的开发。

案例展示：

1. NTA检测外泌体的粒径分布和颗粒浓度：

将得到的外泌体震荡分散均匀，用PBS稀释至合适倍数，标记好样本名称、稀释倍数、完成样本的稀释配制；测样之前，先测试稀释液：移液枪吸取200μL稀释液上机检测，确认组件、仪器都处于正常运行；稀释液测量完成，测试结果正常后开始测试样本，取稀释后的200μL样本上机检测；待计数颗粒数达到100个以上时停止测试，导出数据结果，完成样本检测。
2. TEM观察外泌体的形态：

重悬外泌体至50-100μL 2% PFA中，将5μL混合悬液加到Formvar carbon载样铜网上；也可将5-10μL混合悬液滴加到封口膜上，将铜网Formvar膜面朝下放在悬液上。每个样品准备2-3个铜网；将100μL PBS 加到封口膜上。用镊子将铜网 (Formvar 膜面朝下) 放在PBS液滴上清洗 (在所有步骤中，都应保持Formvar膜面湿润，而另一面干燥)；将铜网放在50μL 1%戊二醛液滴上5 min；将铜网放在100μL ddH₂O洗涤8次，每次洗2min；将铜网放在50μL草酸双氧铀液滴上 (pH 7.0)，5min；将铜网放在50甲基纤维素液滴上10min，冰上操作；铜网放到样品台顶端的不锈钢环上，用滤纸吸去多余液体；空气中干燥5-10min；将铜网放在样品盒内，80kV下拍摄电镜照片。

3. Western Blot 检测外泌体标志物 (三阳一阴)：
将分离纯化得到的外泌体加入裂解液 (E778170)，裂解后吸取上清液，根据测定蛋白浓度稀释样本至合适浓度；裂解液加入 4×LDS上样缓冲液 (T466588)，95°C煮5min，待降至室温后，瞬离；加样：将15μL样本全部加到泳道中，并在样本首尾加上marker；电泳：190V，70min；提前10min用甲醇活化PVDF膜；转膜：转膜液需要提前预冷，275mA，70min；封闭：配置1% BSA的TBST溶液，室温封闭1h；孵育一抗：4°C，摇床上过夜，抗体用1% BSA的TBST溶液稀释；洗膜：1xTBST 洗三次，10 min/次；孵育二抗：抗体用1% BSA的TBST溶液稀释，室温摇床1h；洗膜：1xTBST洗三次，10min/次；曝光拍照。

注意事项和免责声明：

本品仅限于专业人员的科学研究使用，不得用于临床诊断或治疗，不得用于食品或药品。

Houttuynia cordata is a widely distributed biological material that serves both as a medicine and a food. Studies have reported that Houttuynia cordata exhibits good application effects in anti-inflammation, anti-oxidation, anti-apoptosis and other aspects. Exosomes derived from Houttuynia cordata contain a variety of miRNAs that can regulate various life activities, and thus can be used as materials for plant-derived exosome research and drug development.
This product is exosomes obtained through separation and purification from extracts of the stems, leaves and roots of Houttuynia cordata. It can be used in studies such as experimental control, direct loading and targeted modification, and tissue repair.

Product Specifications:

Name	Houttuynia cordata Exosomes from Rhizome
Specifications	1E+10 Particles/EA
Appearance	White Powder
pH	7.0
Aseptic Testing	Aseptic
Total Protein Concentration	（BCA）
Purity	≥90%

Product Advantages:

Strict quality control standards: Multiple quality control analyses are conducted, with stringent standards for various aspects including concentration and purity.

Comprehensive characterization results: Exosome raw material products are characterized in three dimensions in accordance with the MISEV2018 guidelines, namely electron microscopic morphology, particle size and particle distribution, and Western Blot (WB) with three positive and one negative protein markers.

Wide range of application scenarios: It can be used as a control in experimental procedures and functional experiments; it is applicable to engineering modifications such as targeted modification and molecular loading, as well as the development of exosome therapeutic products.

Case Presentation:

1. NTA detection of exosome particle size distribution and particle concentration:
Shake and disperse the obtained exosomes evenly, dilute them to an appropriate multiple with PBS, mark the sample name and dilution multiple, and complete the dilution preparation of the sample; before testing the sample, test the diluent first: absorb 200μL of diluent with a pipette for on-machine detection, and confirm that the components and instruments are in normal operation; after the measurement of the diluent is completed and the test result is normal, start testing the sample, take 200μL of the diluted sample for on-machine detection; stop the test when the number of counted particles reaches more than 100, export the data results, and complete the sample detection.

2. Observation of exosome morphology by TEM:
Resuspend exosomes in 50-100μL of 2% PFA. Add 5μL of the mixed suspension to a Formvar carbon-coated copper grid; alternatively, drop 5-10μL of the mixed suspension onto a piece of parafilm and place the copper grid with the Formvar film facing down on the suspension. Prepare 2-3 copper grids for each sample. Add 100μL of PBS onto the parafilm. Use tweezers to place the copper grid (with the Formvar film facing down) on the PBS droplets for washing (during all steps, keep the Formvar film surface moist while the other surface remains dry). Place the copper grid on 50μL of 1% glutaraldehyde droplets for 5 minutes. Wash the copper grid on 100μL of ddH₂O 8 times, 2 minutes each time. Place the copper grid on 50μL of uranyl oxalate droplets (pH 7.0) for 5 minutes. Place the copper grid on 50μL of methyl cellulose droplets for 10 minutes, operating on ice. Put the copper grid on the stainless steel ring at the top of the sample stage and blot off excess liquid with filter paper. Air-dry for 5-10 minutes. Place the copper grid in the sample box and take electron microscope photos at 80kV.

3. Western Blot Detection of Exosome Markers (Three Positive and One Negative):
Add the isolated and purified exosomes to the lysis buffer (E778170). After lysis, aspirate the supernatant and dilute the sample to an appropriate concentration according to the measured protein concentration. Add 4×LDS loading buffer (T466588) to the lysis buffer, boil at 95°C for 5 minutes, and perform a quick centrifugation after cooling to room temperature. Loading: Load all 15μL of the sample into the lane, and add markers at the start and end of the sample lanes. Electrophoresis: 190V for 70 minutes. Activate the PVDF membrane with methanol 10 minutes in advance. Membrane transfer: The transfer buffer needs to be pre-cooled in advance, 275mA for 70 minutes. Blocking: Prepare 1% BSA in TBST solution and block at room temperature for 1 hour. Primary antibody incubation: Incubate overnight at 4°C on a shaker; dilute the antibody with 1% BSA in TBST solution. Membrane washing: Wash three times with 1×TBST, 10 minutes each time. Secondary antibody incubation: Dilute the antibody with 1% BSA in TBST solution, and incubate on a shaker at room temperature for 1 hour. Membrane washing: Wash three times with 1×TBST, 10 minutes each time. Exposure and photography.

Precautions and Disclaimer:
This product is limited to scientific research use by professional personnel. It must not be used for clinical diagnosis or treatment, nor for food or drugs.

产品属性

pH	7.0

安全和危险性（GHS）

SDS英文版

技术规格说明书

技术规格说明书

h778182_鱼腥草外泌体来源于根茎产品说明书.pdf

质检证书（CoA,COO,BSE/TSE 和分析图谱)

C of A & Other Certificates(BSE/TSE, COO):

输入批号以搜索分析图谱:

通过匹配包装上的批号来查找并下载产品的 COA，每批产品都进行了严格的验证，您可放心使用！

找到1个结果

批号(Lot Number)	证书类型	日期	货号
ZJ25F0926433	分析证书	25-09-02	H778182

溶液计算器

摩尔浓度计算器

计算溶液所需的质量、体积或浓度。

质量

=

浓度

x

体积

x

分子量

g/mol

稀释计算器

计算配制储备溶液所需的稀释度。

浓度1（C1）

x

体积 1 (V1)

=

浓度 2 (C2)

x

体积 2 (V2)

复溶计算器

复溶计算器允许您快速计算试剂的体积，以复溶小瓶。只需输入试剂的质量和目标浓度，计算器将确定其余部分。

体积（添加到小瓶中）

=

质量（小瓶）

÷

所需的复溶浓度

鱼腥草外泌体 来源于根茎

库存信息

基本描述

产品属性

安全和危险性（GHS）

技术规格说明书

质检证书（CoA,COO,BSE/TSE 和分析图谱)

溶液计算器

摩尔浓度计算器

稀释计算器

复溶计算器

鱼腥草外泌体来源于根茎