计算溶液所需的质量、体积或浓度。
BioReagent,用于核酸电泳,适用于电泳 级 ,适用于对基线干扰要求严格的色谱和分析工作流程。
-20°C储存,避免反复冻融。超低温运输 。请查阅批次 COA 获取详细规格。
SDS、COA、产品数据表及规格说明书均可下载。可通过批号查询获取批次 COA。
在色谱分析、有机合成和交叉偶联反应领域已被 0 篇同行评审文献引用。
产品介绍:
6×DNA 上样缓冲液含有两种示踪染料,溴酚蓝和二甲苯青 FF。在 1%琼脂糖凝胶电泳中,溴酚蓝可与~300bp 片段共同迁移, 二甲苯青 FF 可与~4000bp 片段共同迁移。
注意事项:
1. 在电泳过程中,如果发现染料的颜色过浅,影响观察结果。可将1份6×DNA上样缓冲液加到2~5份DNA样品中,混匀后,电泳,不影响结果。
2. 为了您的自身安全,使用试剂前,请做好防护,如穿实验服,戴手套等。
使用说明:
1. 在 37°C 下,使 6×DNA 上样缓冲液融化;
2. 轻轻涡旋,确保溶液的混合均匀;
3. 将 1 份 6×DNA 上样缓冲液加到 5 份 DNA 样品中;
4. 充分混匀;
5. 上样后进行电泳。
Product Introduction:
The 6 × DNA loading buffer contains two tracer dyes, bromophenol blue and xylene blue FF. In 1% agarose gel electrophoresis, bromophenol blue could migrate with~300bp fragment, and xylene green FF could migrate with~4000bp fragment.
Precautions:
1. During the electrophoresis process, if the color of the dye is found to be too light, it will affect the observation results. One 6 × DNA loading buffer can be added to 2-5 DNA samples, mixed well, and subjected to electrophoresis without affecting the results.
2. For your own safety, please take protective measures such as wearing lab coats and gloves before using the reagents.
Instructions for Use:
1. Melt the 6 × DNA loading buffer at 37 ° C;
2. Gently swirl to ensure even mixing of the solution;
3. Add 1 portion of 6x DNA loading buffer to 5 portions of DNA samples;
4. Mix thoroughly;
5. Perform electrophoresis after sample loading.
| pH | 7.6-7.8 |
|---|
通过匹配包装上的批号来查找并下载产品的 COA,每批产品都进行了严格的验证,您可放心使用!
| 批号(Lot Number) | 证书类型 | 货号 |
|---|---|---|
| 分析证书 | L766998 | |
| 分析证书 | L766998 | |
| 分析证书 | L766998 | |
| 分析证书 | L766998 |
我们的级别选择指南涵盖了目录中所有的变体的纯度、稳定剂状态和应用适用性。
查看 Suitable for electrophoresis 级别指南 → 查看 BioReagent 级别指南 → 查看 for NA electrophoresis 级别指南 →