SiCw strengthened WC-Y2O3 composite and its electrochemical corrosion in aggressive medium

The mechanical properties and corrosion resistance of binderless tungsten carbide largely determine its performance and lifespan in complex industrial environments. Herein, WC-1Y 2 O 3 -xSiC w (x = 0, 0.5, 1, and 2 wt%) was prepared using the hot-press sintering. The mechanical properties of the composite, as well as the corrosion resistance of optimized mechanical properties in an aggressive medium (0.05 M H 2 SO 4 and 1 M NaOH) were investigated. Results showed that SiC w could significantly increase mechanical properties of the composite, but excessive content (2 wt%) leads to whiskers aggregation and lower properties. The flexural strength and fracture toughness are all increased to varying degrees with whisker content. WC-1Y 2 O 3 -0.5SiC w possesses the optimal mechanical properties. The Vickers hardness , fracture toughness, and flexural strength are 2331.24 HV 30 , 8.59 MPa·m 1/2 , and 1727 MPa, respectively. Electrochemical tests show that the corrosion resistance of the WC-1Y 2 O 3 -0.5SiC w in H 2 SO 4 is higher than that in NaOH solution, and its corrosion resistance in H 2 SO 4 solution increases, but that of the NaOH solution decreases with exposure time. Detailed characterization demonstrated that a dense WO 3 film forms in the H 2 SO 4 solution, resulting in a flatter corrosion surface. In contrast, the WC phase in NaOH solution dissolves, thus leading to the accelerated corrosion rate.