Specific resistance and adsorption performance of acid-modified fly ash for escaped ammonia in flue gas

Escaped ammonia emission following Selective Catalytic Reduction denitrification significantly influences subsequent flue gas treatment processes. This study investigates the adsorption capabilities of acid-modified fly ash concerning escaped ammonia (NH 3 ) and its consequential impact on specific resistance. Furthermore, the adsorption mechanism of acid-modified fly ash on NH 3 was explained. Acid activation facilitated the dissolution of a portion of Fe and Al constituents within the fly ash, the contents of Fe and Al in SFA decrease by 4.91% and 5.64%, respectively. In addition, the specific surface area and porosity of fly ash are obviously improved. The specific surface areas of HFA and SFA increased from 1.83 (OFA) to 4.69 and 7.71 m 2 /g, respectively. Adsorption kinetics adhered to the pseudo-first-order model. SFA showed the best adsorption performance, with NH 3 adsorption up to 10.65 mg/g, which was 4.27 times higher than OFA. The creation of a surface liquid film during NH 3 adsorption led to decreased specific resistance values across all fly ash samples after-adsorption. The highest specific resistance values recorded for original fly ash (OFA), hydrochloric acid-modified fly ash (HFA) and sulfuric acid-modified fly ash (SFA) were 6.21 × 10 12 , 3.37 × 10 11 and 5.02 × 10 10 Ω·cm, respectively. Sulfuric acid activation makes fly ash have stronger adsorption capacity for escaping ammonia, and SFA maintains good specific resistance characteristics, which has good application prospects in electrostatic precipitation and air pollution control .