Incorporating functionalized acyl chloride monomer with rigid pyrrolidinyl group via two-step interfacial polymerization for improving permeability of reverse osmosis membranes

Novel acyl chloride monomer 5-(1-pyrrolidinyl)-1,3-benzenedicarbonyl dichloride (PIPC) featuring a rigid pyrrolidinyl group was proposed as an organic phase monomer to fabricate reverse osmosis (RO) membranes possessing exceptional water permeability and NaCl rejection via a two-step interfacial polymerization method. First, m -phenylenediamine (MPD) in the aqueous phase solution polymerized with PIPC in the first organic phase solution to form the much looser polyamide . After that the remaining MPD continued to diffuse to polymerize with trimesoyl chloride in the second organic phase solution to form the denser polyamide. The pyrrolidinyl group had steric hindrance effects and formed hydrogen bond with MPD, leading to decreasing the thickness significantly and increasing surface roughness of the separating layer. When the PIPC amount was 0.08 wt%, the PIPC-based RO membrane displayed optimal permselectivity with water flux increasing by 84.20 % compared to the original RO membrane (from 20.38 L·m −2 ·h −1 to 37.54 L·m −2 ·h −1 ) whereas retaining high NaCl rejection with 98.59 %. The PIPC-based RO membrane exhibited steady water flux and NaCl rejection within 120 h of filtration, as well as improved antifouling performance. Thus, preparation of the highly permeable RO membrane could be rationally achieved by the novel acyl chloride monomer with a rigid pyrrolidinyl group.