Activation of peroxymonosulfate by Fe–Mn-modified MWCNTs for selective decontamination: Formation of high-valent metal-oxo species and superoxide anion radicals

The extensive presence of organic micropollutants in complex water matrices requires the development of selective oxidation technologies . In this study, a novel selective oxidation process was developed via the conjunction of FeMn/CNTs with peroxymonosulfate and successfully used to remove micropollutants such as sulfamethoxazole (SMX) and bisphenol A from aqueous solutions. FeMn/CNTs were prepared using a facile co-precipitation method, characterized using a series of surface characterization techniques, and then tested for pollutant removal . The results showed that the FeMn/CNTs had much greater reactivity than CNTs , manganese oxide , and iron oxide . The pseudo-first-order rate constant with FeMn/CNTs was more than 2.9–5.7 times that of the other tested materials. The FeMn/CNTs had great reactivity in a wide range of pH values from 3.0 to 9.0, with the best reactivity found at pH values of 5.0 and 7.0. High-valent metal-oxo species such as Fe(IV) O and Mn(IV) O and superoxide anion radicals were determined to be the reactive species and were responsible for the oxidation of SMX. These reactive species were selective; therefore, the overall removal performance of SMX was not obviously influenced by high levels of water components including chloride ions, bicarbonates , and natural organic matters. The results from this study may promote the design and application of selective oxidation technologies for micropollutant abatement.