Insights into the calcination temperature and loading amount of the catalyst support (TiO2) in the fibrous ceramic-based catalytic filter element prepared by microwave drying

The fibrous ceramic-based catalytic filter element (CFE) is a promising multifunctional material capable of simultaneously removing dust and NO x from hot gases. In this study, various calcination temperatures and titanium sols with different solid contents were used to prepare CFEs based on microwave drying, and their influences on the catalytic performance were experimentally investigated. The results showed that both the calcination temperature and the solid content of the titanium sol had important impacts on the catalytic activity. As the calcination temperature increased, the particle size, crystallite size , and average pore diameter of the loaded catalyst support (TiO 2 ) increased, while the specific surface area decreased, ultimately resulting in a decline in the catalytic activity. However, a suitable calcination temperature ranging from 300 to 400 °C was required to achieve a good combination between the catalyst and the fibrous ceramic and a relatively uniform mesoporous structure. Furthermore, the increase in the solid content gave rise to a corresponding increase in the TiO 2 loading amount, which increased the pressure drop and reaction surface area of the CFE. Excessive vanadium content caused by insufficient catalyst support induced side reactions of NH 3 oxidation under high-temperature conditions, thereby reducing catalytic activity. Therefore, the preferred calcination temperature and solid content were set at approximately 300–400 °C and 8 wt%, respectively. The final prepared CFE demonstrated superior catalytic performance and adaptable gas velocity properties.