Acquiring Mg-Ag microalloying TiB2/Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

The strength-ductility trade-off severely limits the extensive application of particle-reinforced aluminum matrix composites mainly owing to the critical issues of local particle agglomeration and poor interfacial characteristics. The present work concentrates on these intractable puzzles and proposes Mg-Ag microalloying TiB 2 /Al-4.5Cu composites fabricated by an optimized salt-metal reaction method and multistage heat treatment. The resulting microstructure evidence that this new tactic synergistically ameliorates the detrimental agglomeration of TiB 2 particles by Mg and Ag doped at the TiB 2 /α-Al interface， meanwhile promoting the formation of nanosized Ω-Al 2 Cu and σ-Al 5 Cu 6 Mg 2 phases. The mechanical property experimental results indicate that the Mg-Ag microalloyed TiB 2 /Al-4.5Cu composites exhibit an accredited combination of the tensile strength (ultimate tensile strength is 496.3 ± 15.0 MPa) and ductility (uniform elongation is 12.8 ± 1.4 %). We emphasize the reciprocal effect between TiB 2 particles and the precipitated phase associated with unrelaxed misfit strains. Close attention is also paid to the interface binding characteristics and semi-coherent interphase boundary to evaluate their contribution to the ductility. The microalloying strategy can potentially be applied to many other metal matrix composites and boost analogous approaches for designing ultrahigh yet ductile materials for technological applications.