Thermostable and nonflammable polyimide/zirconia compound separator for lithium-ion batteries with superior electrochemical and safe properties

Separators are applied to segregate cathode and anode, and provide ion transport channels in lithium-ion batteries (LIBs). Nevertheless, present commercial polyolefin separators represent high thermal shrinkage and inferior electrolyte wettability , seriously limiting wider development of LIBs. In this work, we prepared zirconia (ZrO 2 ) nanolayer encapsulated polyimide (PI) nanofiber compound separator through in-situ polar adsorption and hydrolysis strategy. The obtained PI/ZrO 2 compound separator has superior thermal stability, electrolyte wettability and flame retardance in comparison with polypropylene (PP) separator. The shrinkage ratio of prepared PI/ZrO 2 compound separator is 0 even at 300 °C, while the PP separator significantly shrank at 160 °C. Furthermore, the ionic conductivity of PI/ZrO 2 separator reaches up to 1.32 mS cm −1 , far higher than 0.34 mS cm −1 of PP separator. Besides, the coin batteries of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811)/electrolyte-separator/lithium (Li) assembled with PI/ZrO 2 compound separator exhibit enhanced rate performance, high discharge capacity retention rate of 88.3% after 100 cycles at 1C and excellent battery safety performance even at 140 °C. Thus, combined with its advantages, such as preparation, thermostability, electrolyte wettability, electrochemical property and safety, the PI/ZrO 2 compound separator exhibits promising prospect in the application of commercial LIBs.