Microfluidic Fabrication and Thermal Properties of Microencapsulated N-Hexadecane with a Hybrid Polymer Shell for Thermal Energy Storage

In this study, a strategy based on microfluidic method is developed toward a facile fabrication of phase change material microcapsules with uniform and controllable particle size as well as high encapsulation ratio and thermal stability. N-hexadecane, as a phase change material, was successfully encapsulated by a hybrid shell of poly (methyl methacrylate) and polyurea. The fabrication process includes the following three steps: (1) Formation of oil-in-water droplets with uniform micron size in the microfluidic chip; (2) formation of the first polyurea shell to encapsulate droplets by fast interfacial polymerization when the droplets pass through the coiled transport microchannel; and (3) completion of free radical polymerization of methyl methacrylate inside the microspheres by heating to form the hybrid microcapsule shell. The average size, encapsulation ratio, and phase change enthalpy of microcapsules changed by varying the flow rate of the dispersion phase and raw material composition. The highest melting enthalpy of 222.6 J g−1and encapsulation ratio of 94.5% of the microcapsule were obtained when the flow rates of the continuous and dispersion fluids were 600 μL min−1and 24 μL min−1, respectively. It is shown that the phase change material microcapsules were stable after 50 heating/cooling cycles.Keywords:phase change materials;microencapsulation;microfluidics;thermal energy storage